Molecular Devices SpectraMax Gemini XS Fluorescence Luminescence Reader Software

Detection modes: Absorbance Read methods: End point, kinetic, linear scanning Microplate types: 96-w (more)ell plates Light source: Tungsten halogen Detector: photodiode Wavelength range: 380 to 900 nm Incl. Filters: 340, 405, 450, 490, 630 nm Dynamic range: 0 to 4.0 OD Resolution: 0.001 OD Pathlength correction: no OD accuracy: < 1% at 2.5 OD OD linearity: <1% at 2.5 OD, < 2% at 3.5 OD OD repeatability: < 0.5% at 2.5 OD, < 1.5% at 3.5 OD Reading speed (kinetic): 96 wells: 8 seconds Dimensions (WxDxH): 394 x 406 x 222 mm Weight: 13.6 kg Excl. software. Click for possible GEN5 basic/secure/IVD configurations

This BMG Lab Technologies Fluostar Galaxy Microplate Reader was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but would not connect to a PC (not included) when we tried to test it. Other units would connect to this same PC, so we are sure it is the unit itself at fault, and not the PC. It is in otherwise good cosmetic condition with minor marks but is sold for spares/repairs.

Tecan Infinite F50 Microplate Reader This system was removed from a university lab where it was surp (more)lus to requirements. It is in good cosmetic condition and working order. This system includes the following: - Tecan i-control software - Dell Windows 7 PC Set-Up. Power supply included.

Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included Plates Accepted 96-Well  (more)and 384-Well Flat Bottom Plates Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 &amp; 384-well plates - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9610 is designed for efficient processing of multiple samples and accepts standard 96 well plates as well as 384 well plates for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5⁰C up to 45⁰C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included includes: - SmartReader PC Software for MR9610 - Operator's Guide - Power Cord - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The GAC 2000 is a convenient and reliable test instrument designed for large-acreage farmers needing (more) immediate moisture, temperature and test weight information on up to 8 different grains. Measurement Method: Capacitance, conductance, weighing device Applications: Cereals, oilseeds, grass seeds, vegetable seeds, beans Measured Parameters: Moisture, temperature and test weight Moisture Range: 5 – 45 % (depending on grain) Grain Temperature: 0 – 50°C Temperature Difference: 20°C room to grain sample Temperature Compensation: Automatic Moisture Resolution: 0.1% Grain Type: Whole grain, pellets Sample Size: 250 g

Excluding connection gas kit (see pictures for kit)

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Labconco 710401000 FreeZone 4.5L -84C Complete Freeze Dryer System Features - Patented moisture sens (more)orprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 4.5L -84 C Complete Freeze Dryer System includes the Labconco 710401000 FreeZone 4.5L -84C Benchtop Freeze Dryer with stainless steel coil and collector, Labconco 7522800 12-Port Drying chamber, and an Edwards RV5 Vacuum Pump. Labconco 710401000 FreeZone 4.5L -84C Benchtop Freeze Dryer with stainless steel coil and collector is designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -84C (-119F), suitable for aqueous samples. The Labconco 7522800 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV5 rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco FreeZone 4.5L -84C Complete Freeze Dryer System includes: - Labconco 710401000 FreeZone 4.5L -84°C Benchtop Freeze Dryer with Stainless Steel Coil and Collector - Labconco 7522800 12-Port Drying chamber - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Edward EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty