Axon Instruments Genepix 4000b Microarray Scanner Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Axon Instruments Genepix Personal 4100A Microarray Scanner This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up but has not been tested further. It is in great cosmetic condition with only minor marks.

This Irori AccuTag 100 Scanning Station  Model: At-100-CS-CE was removed from a university lab  (more)where it was surplus to requirements. The item is in reasonable cosmetic condition. There are scratches/dents on the surface, along with stains. The accessories have been used and thus have broken seals. The item was plugged in, but there wasn't any clear indication it had powered on. We were unable to test it further without a PC connection. Also included are the following:1x AccuTag Synthesis Manager Version 1.01x AccuTag Synthesis Manager Version 2.2612x Irori Radio Frequency Tag1x PSU1x DE-9 cable

Packard Biochip Technologies ScanArray Lite Micro Array This was removed from a university lab where (more) it was surplus to requirements. The unit powers up but has not been tested further. The lab confirmed it was working prior to removal. It is in great cosmetic condition with only minor marks. The power lead is included.

Odessy LI-COR Unit Model-9120 Lab This item was removed from a university where it was surplus to re (more)quirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility as it requires software. Software not included.

VWR Galaxy Miniarray minicentrifuge. Speed of 4,000 rpm. Capacity for 2 microarray slides. Specifica (more)tions: 230 V; 50-60 Hz

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: Ambient +8°C to 130°C Temperature stability (at 37°C): ± 0.1°C Temperature unifor (more)mity within block (at 37°C): ± 0.1°C Temperature uniformity within block (at 130°C): ± 1°C Display resolution: 0.1°C Dimensions (WxDxH): 235 x 280 x 115 mm Weight (without blocks): 2.3 kg Equipped with: 1x Block SHT1/12 (Tube size: 12 mm, No of holes: 20, Hole size (ØxD): 12.5 x 47 mm 1x Block SHT1/16 (Tube size: 16 mm, No of holes: 12, Hole size (ØxD): 16.6 x 47 mm

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-41027ITEM-28378 SCIEX Equipment Piece ITEM-28376 Control System ITEM-28368 Consort E844 ITEM-28369 Consort E844 ITEM-28370 Consort E844 ITEM-28374 Alaris Infusion SystemITEM-28387 Nanospray Switch ModuleITEM-28381 Artesyn Power SMP/PF ITEM-28384 Coil ITEM-28383 Coil ITEM-28371 Stuart Turner Pump ITEM-28379 SCIEX Equipment Piece ITEM-28385 Vibration GeneratorITEM-28382 Unknown metal component ITEM-28084 Alaris Infusion System ITEM-28386 Plitron ComponentITEM-28375 Lambda Alpha 600W ITEM-27965 Elgameter Elgastat ITEM-28380 Coil C ITEM-28367 Graseby PCA Pump 3300 ITEM-27940 Glassware Stand ITEM-28086 Graseby PCA Pump 3300 ITEM-28085 Graseby PCA Pump 3300 ITEM-27955 Miscellaneous electrophoresis equipment ITEM-28372 Flowgen AccessoryITEM-28373 Durapipe Accessory ITEM-27960 4x system controllers ITEM-27966 Orion Star A111 pH Meter ITEM-27961 Miscellaneous pieces left over from ITEM-18980 ITEM-27964 Grant Water Bath Stirrer ITEM-27957 Biometra PS304 II ITEM-27959 Cuvettes 10x4x45mm ITEM-27956 Consort E143 ITEM-27946 8x boxes of 110x30 mm thermopaper ITEM-27947 Precision Microplate Reader ITEM-27945 Vickers Instruments Microscope in box ITEM-27958 Bag of Short clamps ITEM-27949 Microliter Syringe 100 µL REAGENT ITEM-27951 Microliter 100 µL Syringe ITEM-27954 Flowgen MH1070B ITEM-27952 Flowgen MH1070B ITEM-27953 Flowgen MH1070BITEM-27941 Plastic components ITEM-27942 Cobra Fara sample wheels & accessories ITEM-27943 500 Watt Auto TransformerITEM-27944 Vacuum Pump ITEM-27948 Grant LTD6G ITEM-27939 Box of 1.5 ml microtubes ITEM-27938 Mixed Lab GlassITEM-21723 VG Pirani UnitITEM-26098 Glassware

*No weight set on template* Sorvall Porter-Blum Ultra Microtome MT-2 Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and fully functional. Also includes: 1 x Pivoting Microscope Arm1 x Telescopic Locking Screw1 x Telescopic Arm1 x Microscope Locking Screw 2 x Microscope Holder & Stereo Microscope

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Heidolph 036110234 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 145mm Plate Temperature Range (more) 20 to 350°C Speed Range 100 to 1,400 RPM Stirring Capacity 20L Features - Comprehensive safety features including large safety distance and visual residual heat indicator - Automatic stir bar detector for hassle-free operation - Rotational direction setting for optimal sample mixing - Three-stage setting for stirring speed startup behavior - Programmable ramps and individual profiles for increased precision and reproducibility of experiments - Compatible with Pt1000 temperature sensor and double sensor for simultaneous measurement in sample and bath liquid - Three heating modes: FAST for quick heating, PRECISE and PRECISE+ for exact temperature control without overshoot - Multiple interfaces to ensure compatibility with your lab's data management system The magnetic stirrer Hei-PLATE Mix 'n' Heat Expert convinces with its intuitive handling: Thanks to respectively one display per main function (stirring and heating), you have an easily legible eye on all values and settings at any time. The handling is made via two push-and-rotary controls with LED-rings for an easy identification of the active functions. Separate timers for heating and stirring functions create flexibility and let you control your experiments better. The user-friendly menu navigation makes working with this device particularly easy. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50 °C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This makes it suitable for the use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times.Click Here to View Product Video INCLUDED: The Heidolph 036110234 Hei-PLATE Mix 'n' Heat Expert Basic Sensor Package, 145mm Plate includes: - Magnetic Stirrer Hei-PLATE Mix'n'Heat Expert (145 mm diameter) - Pt1000 Temperature Sensor for Precise Temperature Regulation - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty