CN-Bio PhysioMimix OOC Multi-Organ Microphysiological System

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Laboratory tap with gas base Straight wall feeder with base For technical gases, inert gases (nitrog (more)en), air (no burning gases).

This item has just arrived in our stock. Please enquire for further details.

Optocell Technology CuBiAn XC Fully Automated Clinical Chemistry Analyser This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and all passwords have been reset. These will be released on purchase. It initialises well and operates as it should. It is in good cosmetic condition with minor marks.

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

Digital block heater for two aluminum blocks provides precise temperature control in small vessels.  (more)Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. The block heater is ideal for melting and boiling point determination, enzyme reactions, incubation and activation of cultures, immunoassays, DNA denaturation, culture media tests, coagulation tests, blood-urea-nitrogen determinations and in situ hybridizations. Stepless adjustable temperature up to 120°C Timer: Countdown, adjustable from 1 min to 99h 59min Counter: Display of heating time Highly versatile with a large number of blocks Error code display Fixed safety circuit Acoustic signal at end of test Number of blocks: 2 Heat output: 250 W Heating temperature range: Ambient +5°C to 120°C Temperature display: yes Adjustment and display resolution: 1 K Connection for ext. temperature sensor: CT (DIN12878) PT 1000 variation;DIN EN 60751 Kl. A: ≤ ± (0.15 +0.002xITI) K Temperature stability within the blocks at 37°C: ±0.2°C Temperature stability within the blocks at 60°C: ±0.4°C Temperature Homogenity at 37°C: 0.2 K Temperature Homogenity at 60°C: 0.4 K Heatingrate / Heat up time with external sensor: 4.5 K/min Set-up plate material: Aluminium alloy Set-up plate dimensions: 96 x 152 mm Fixed safety circuit: 150°C Timer: yes Time setting range: 1 – 5999 min Dimensions (WxHxD): 151 x 73 x 304 mm Weight: 1.724 kg Blocks included: 1x DB 1.2: Used for Eppendorf microtubes (1.5 ml) Pore size: Ø 11.5 mm No. of holes: 20 Hole depth: 36.9 mm Dimensions (WxDxH): 95 x 76 x 51 mm 2x DB 5.1: Used for 12 mm vials Pore size: Ø 12.7 mm No. of holes: 20 Hole depth: 30.0 mm Dimensions (WxDxH): 95 x 76 x 51 mm 1x 13.9: Used for round bottom tubes (12/13 mm) Pore size: Ø 13.7 mm No. of holes: 16 Hole depth: 48.4 mm Dimensions (WxDxH): 95 x 74 x 51 mm

This Sutter Instrument Co. Model P-87 Flaming / Brown Micropipette Puller was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and is in reasonably good cosmetic condition. It's operational but needs a replacement filament.Unable to test further at our facility.

Four load cell ramp platforms