AB Applied Biosystems Hitachi 3130xl Genetic Analyser Lab

DNA Sequencer, automatically analyzes DNA molecules labeled with multiple fluorescent dyes. After sa (more)mples are loaded onto the system’s vertical gel, they undergo electrophoresis, laser detection, and computer analysis. Electrophoretic separation can be viewed on-screen in real-time, and final data can be output in a variety of formats. The 377 system accepts gel plates in four different lengths for flexibility in sample analysis. Computer and software not included. Performance / Throughput: Performance 900 bases with 98.5% accuracy Production-scale Throughput (lanes per day) 24-96 samples Physical Specifications Width 74 cm (29 in) Height 81 cm (32 in) Depth 52 cm (21 in) Weight 103.5 kg (230 lbs)

Applied Biosystems ABI Prism 7900HT This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but has the following issues. The 7900 did connect to the PC at first but there appears to be a fault with the plate loader. The door will not open when instructed. If you try to run a program you get a 3003 error. 'unable to load the plate, Tray not at up position'.There was a loud humming noise coming from the unit which appeared to get louder the longer it was switched on. Then would no longer connect to the PC. We have removed the side panels but cannot see any obvious issues. It is sold for spares/repairs. The PC is included. Dell Optiplex PCDell 17" MonitorKeyboard & MouseUSB CableDVI Cable All parts power on and work, the pc has ABI 7900HT Sequence Detection Systems Version 2.4.1 Software.

Chemotec NucleoCounter Type 900-004 This was removed from a lab where it was surplus to requirement (more)s. The unit powers up and it is in good cosmetic condition with minor marks from use. The PSU is included.

Thermo Scientific Easy-nLC II Nano-flow Liquid Chromatography System This system was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Log-in information is available on request.

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)has not been tested further. It is in good cosmetic condition with minor marks from use. The system also includes: 1 x Logitech Wireless Keyboard & Mouse.8 x Used MiSeq Flow Cells in containers.1 x 96 Well Plate.1 x Spare FSE Fluidics Kit 15013841S.7 x HiSeq Flowcell Gaskets 15011631.1 x Ultra-Low Universal Lid.1 x Illumina GenomeStudio v1.7 Software disc.

Chemical resistant vacuum pump consisting of N 840 G diaphragm vacuum pump, base plate and two separ (more)ator bottles on the suction and pressure side. Thanks to the high compatibility of steam and condensate, the system is perfectly suited for extremely aggressive/corrosive gases and vapours. Technical features Flow rate (max.): 20 l / min Final vacuum (max.): 6 mbar (abs.) Pressure (max.): 0.1 bar (rel.) Flow rate (m³/h) at atm. pressure: 2,04 Permissible fluid temperature between 5°C and 40°C Valve material: FFPM Diaphragm material: PTFE coated Pump head material: TFM ™ PTFE Applications Filtration Degassing Vacuum oven Centrifugal concentration Qualitative characteristics Ideal for extremely aggressive / corrosive gases and vapors High compatibility with steam and condensate Integrated gas ballast valve Integrated control of the rotation speed 3-color status display for running / stand-by / error Compact, silent and reliable Chemically resistant compound vacuum system diaphragm vacuum pump, base plate and two separating bottles on the suction and pressure sides Modular; expandable 100% oil-free transfer - then pure transfer, evacuation and compression of gases High compatibility with steam and condensate Ecological Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This Amersham Biosciences IN Cell Analyzer 1000 was removed from a university lab where it was surpl (more)us to requirements. The system powers up and communicates with the PC and software, but it fails the Z drive test. It is in good cosmetic condition with minor marks. Included with it are; Nikon Eclipse TE2000-UObjective - Nikon Plan Fluor ELWD 20X/0.45 DIC L ∞/0-2 WD 7.4) Xenon Arc Lamp (Loose inside behind back panel)Bulb - OSRAM XB0-100-OFRSN - JJD-394-001 066 Inside Floorstanding unit:-Hamilton ControllerPN - 231352/00SN - 228 PC - HP Workstation xw4200 -Comes with Keyboard & Mouse Manuals/Discs:-IN Cell Developer ToolboxIN Cell Investigator Toolbox V1.6IN Cell Analyzer 1000 User Training coursesIN Cell Analyzer 1000 Instrument Ediction V.3.2 RC3 CDAmersham Liquid Handling CD Also comes with:-Amersham Biosciences MultiTemp 3 recirculating Water BathCode no. 18-1102-78PN - 56-1165-34SN - 1200400269 009 Powers on, temperature tested at 37˚c, 90˚c (max) and -10˚c (min) - All working fine.

Automatic rotational scales is designed for operation in technological lines of cylindrical packaged (more) goods, like aerosols, sprays, glass and plastic bottles, etc. Control unit is based on Windows Embedded software and SQL database server. Industrial computer is designed to operate in hard industrial conditions. Its cooperation with specially prepared Windows platform makes the system stable and allows for holding set parameters. Graphic and touch screen communication panel makes operation very easy and intuitive which has already been appreciated by users. Rotational device is not equipped with its own conveyor belt, it is mounted over an existing one, which significantly shortens and simplifies its installation. The scale is pneumatically powered. This provides high durability and reliability. The DWR H2 checkweigher features two independent weighing systems in-built into one construction, thanks to which the throughput is 160 pcs/min. Application: Rotational scales is intended to control cylindrically shaped single packages, like aerosol, with diameter 35- 66mm*. System operates in accordance with regulation on Control of Prepacked Goods. Main application: · Chemical industry, · Pharmaceutical industry, · Distilling industry, · Food processing industry. * it is possible to weigh containters with other diameter Functions Rotational scales provide 100 % control of goods transported on the processing line. Goods that do not meet set thresholds are discriminated from the line. Control of goods in accordance with regulation on Control of Packaged Goods, Acquiring data on controlled goods, Definable access levels for scale users, Discrimination of defective goods by weight, Extended statistics conducted in real time, Built-in line performance meter, Reports generated automatically in accordance with the weighing mode, Export of reports to PDF files, Cooperation with other devices in a processing line, Remote start and stop function, Detection of line congestion, Detection of empty line, Cooperation with computer software. Basic technical data Industrial Windows Embedded system, Industrial computer designed for operation in hard conditions, Graphic touch screen, Databases applying SQL servers, Interfaces and ports: RS232, USB and Profibus, Ethernet, Controlling - informative outputs control, IP55 or IP65 Cooperation with peripheral devices Rotational scale is prepared to cooperate with peripheral devices, and devices form a processing line. I/O set provides broad configuration possibilities and full integration of the scale with an existing processing line. Cooperation with dosing device with feedback, Cooperation with barcode scanner, Printouts on receipt printers, Remote control , Keeping records from weighing on a computer. Implementation options: Separate discriminating set for "too light" and "too heavy" goods, Sounder and/or Warning tower lights, Cooperation with printers and label printers, Two USB ports, Profibus and Modbus interface support, Weighing record application.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 500 mg Material: nickel silver M1 Class Mass Standards – Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

Heidolph 036300370 Overhead Stirrer Impeller, BR 14 Collapsible-Blade Especially when using narrow-n (more)ecked vessels, e.g. round-bottom flasks, an stirring tool with collapsible blades is used. Just like our collapsible-blade impeller BR 14. This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: ideal vessel diameter: 180 mm, ideal ground clearance: 9 mm, ideal filling level: 180 mm, and ideal volume: 4,600 ml. The collapsible-blade impeller BR 14 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300370 Overhead Stirrer Impeller, BR 14 Collapsible-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty