Yamato IN-804W-115V Programmable Refrigerated Incubator with Window 286L, 115V

Sanyo CO2 Incubator MCO-17AIC This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up but has an issue with CO2 leaking. It is sold for spares/repairs.

Sanyo Laboratory CO2 Incubator Stack  Models - MCO-17AIC / MCO-17AI These were removed from a  (more)university lab where they were surplus to requirements. The units power up and are in good working order. They were tested with a digital thermometer (not included). They are in good cosmetic condition with minor marks from use. 1x Sanyo CO2 Incubator:Model - MCO-17AISN - 90705826 Inside dimensions - D51 W49 H66.5cm3 Shelves 46 x 46cm1 Tray 46.5 x 36.5 x 4cm 1x Sanyo CO2 Incubator:Model - MCO-17AICSN - 10100758 Inside dimensions - D51 W49 H66.5cm2 Shelves 46 x 46cm1 Tray 41 x 31 x 5cm

Yamato IC-603CW General Purpose Incubator with Window 159L, 115V Temperature Range Ambient +5°C to  (more)80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 159L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 159L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-603CW General Purpose Incubator with Window 159L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato IC-103C General Purpose Benchtop Incubator 37L, 115V Temperature Range Ambient +5°C to 80°C  (more)Temperature Distribution Accuracy ± 1.0°C Chamber Volume 37L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Benchtop, economical general purpose 37L natural convection incubator. Control panel located at a higher position for easy access. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-103C General Purpose Benchtop Incubator 37L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IF55 Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 53 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF55 Forced Circulation Incubator 53L, 115V offers precise temperature control and efficient forced air circulation, making it ideal for a variety of laboratory applications. With a setting temperature range of +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures consistent performance for temperature-sensitive processes. The spacious 53L (1.1 cu.ft.) interior is made from reinforced stainless steel, designed for easy cleaning and long-lasting durability. Its ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, complete with a high-definition TFT-color display, allows for accurate adjustments of parameters such as temperature, fan speed, air flap position, and program time. In addition to its advanced functionality, the IF55 includes several safety features, such as an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meet protection class 1 standards according to DIN 12880. The forced air circulation system, powered by a quiet air turbine adjustable in 10% steps, includes the option for pre-heated fresh air admixture to further enhance control over the incubation environment. With a maximum chamber load of 176 lbs and each shelf supporting up to 44 lbs, the IF55 is built for reliability and precision, offering advanced AtmoCONTROL software for programming and data management via Ethernet or USB. INCLUDED: TheMemmert IF55 Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA INC 125 FC Digital Cooled Incubator Temp. Range -5°C to 100°C Temp. Uniformity ±0.3 K Chamber Vo (more)lume 125 l Features - Precise Temperature Control: Wide range from -5 °C to 100 °C. - Uses natural refrigerant R290. - 125 liters, with space for up to six grid shelves. - Decontamination mode, easy-to-clean surfaces, and defrosting function. - Excellent stability and uniformity, adjustable fan, and superior insulation. - Large LCD display, timer functions, and intuitive controls. - Stackable units, optional door locks, and various shelves. The IKA INC 125 FC Digital Cooled Incubator is an ideal solution for microbiological applications, offering precise temperature control from -5 to 100 °C. It features powerful compressor cooling technology and uses the environmentally friendly refrigerant R290. With a capacity of 125 liters, it can accommodate up to six grid shelves, providing ample space for various applications. The incubator ensures hygienic working conditions with a decontamination mode at 100 °C, easy-to-clean interior surfaces, and a defrosting function. Optimal temperature control is achieved through excellent stability and uniformity, an electronically adjustable fan, and superior insulation. Simple and intuitive operation is facilitated by a large LCD display, timer functions, and a temperature-controlled timer. The incubator also offers versatile accessories and services, including stackable units, optional door locks, and available installation and operation qualifications.INCLUDED: The IKA INC 125 FC Digital Cooled Incubator includes: - INC 125 FC digital Incubator cooled - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt protection / assembly material (2 pcs.) - USB A-B cable - Calibration certificate at 37 °C & 10 °C - Hose adapter (for hoses Ø 9-11 mm) - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Dell Optiplex with Heidolph Hei-Control-Software This was removed from a university lab where it wa (more)s surplus to requirements. The unit powers up and is in god working order. It is in good cosmetic condition with marks from use.

Hoefer PS300B Electrophoresis Power Supply Voltage 10 to 300 V in 1 V step Current 4 to 500 mA in 1  (more)mA steps Maximum Wattage 90 W Features - Constant voltage or constant current mode with automatic crossover - 10 to 300 V, 4 to 500 mA, 90 W - Four sets of 4 mm output jacks - Ideal choice for most electrophoresis techniques - Continuous runs or 999 minute timer - Automatic recovery after power failure - Open circuit detection - Short circuit protection The Hoefer PS300B Electrophoresis Power Supply is a versatile and reliable solution for most electrophoresis techniques. Its compact design, large handle, and intuitive operation make it easy to integrate into any lab environment. Equipped with a large, easy-to-read LED display, the PS300B allows users to set constant voltage or current parameters, adjust the timer up to 999 minutes, and start runs effortlessly. With a range of 10 to 300 V and 4 to 500 mA, this power supply delivers up to 90 W of power, ensuring precision and adaptability for various applications. The PS300B features three distinct modes of operation: Constant Voltage Mode, where the power supply will attempt to maintain the user-selected voltage by automatically adjusting the current flow; Constant Current Mode, where the power supply will attempt to maintain the user-selected current flow by automatically adjusting the voltage supplied; and Automatic Crossover, which ensures that when the constant parameter (voltage or current) cannot be maintained due to power supply operating limits, the power supply automatically switches to maintaining the other parameter. Key features include short circuit and open circuit protection, automatic recovery after power failure, and four 4 mm output jacks for flexible connections. Designed for both continuous operation and timed runs, the PS300B ensures reliable performance, making it an ideal choice for consistent, efficient electrophoresis procedures. INCLUDED: The Hoefer PS300B Electrophoresis Power Supply includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scientific Industries Roto-Shake Genie The Roto-Shake Genie is is designed to provide rotating, rock (more)ing, and 3-D orbital shaking in one compact, durable and user-friendly unit. It is ideal for rocking, rotating, and orbital shaking. The Roto-Shake Genie easily and quickly converts from rocking to rotating and vice-versa. Features a stainless steel Magnetic Platform and clip plate system that holds almost any container. The Roto-Shake Genie is new in the box . Includes: 1 Clip Plate each for 10-13mm Tubes, 15-17mm Tubes, and 28-30mm Tubes 4 Magnetic Bag Mounting Strips Non-skid Tray Power Cord Original Manufacturer Documentation Full 2 Year Parts and Labor Warranty Scientific Industries Roto-Shake Genie Specifications

Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 022654047 The Eppendorf FA-45-30-11 Fixed Angle Rot (more)or, Cat. #: 022654047, is a centrifuge rotor designed for use with the Eppendorf 5430/R Series centrifuges. This rotor has a maximum speed of 15,350 RPM and a maximum relative centrifugal force (RCF) of 20,817 x g. It can accommodate a maximum capacity of up to 30 × 1.5/2.0 mL tubes. INCLUDED: The Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 022654047 includes: - Eppendorf FA-45-30-11 Fixed Angle Rotor - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 022654047Maximum Speed15,350 RPMMaximum RCF20,817 x gMaximum Capacity30 × 1.5/2.0 mL tubesRadius9.5 cmCentrifuge CompatibilityEppendorf 5430/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }