Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V

ESCO CelCulture CCL–050B-8 CO2 Laboratory Incubator This was removed from a university lab where it  (more)was surplus to requirements. The unit has been professionally serviced and is in full working order. It is in good cosmetic condition with minor marks.

Sanyo MIR-153 Cooling Laboratory Incubator Lab This item was removed from a university lab where it  (more)was surplus to requirements. It is in reasonably poor cosmetic condition with noticeable damage. Due to a faulty control panel, we were unable to set the temperature to test. Therefore, its sold as Spares or Repairs.

Panasonic MIR-154-PE Cooled Incubator Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally. Specifications. - Model: MIR-154-PE - SN: 12060103

Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V Temperature Range Ambient  (more)+5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 37L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Benchtop, economical general purpose 37L natural convection incubator with observation window. Control panel located at a higher position for easy access. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-103CW General Purpose Benchtop Incubator with Window 37L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN110 Natural Convection Incubator 108L, 115V Temperature Range At least 5°C above ambient  (more)to +80°C Convection Type Natural Convection Chamber Volume 108 L Features - 108 L (3.8 cu.ft.) capacity for ample sample accommodation - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - High-resolution display with 0.1°C accuracy for both set point and actual temperature values - Adjustable parameters including temperature (Celsius/Fahrenheit), air flap position, program time, and daylight savings - SetpointWAIT function ensures process time begins only once the set temperature is reached - AtmoCONTROL software allows for data management and program organization via Ethernet - Inner glass door allows for easy sample monitoring without disrupting the internal environment - Autodiagnostic system and adjustable overtemperature monitor for enhanced safety The Memmert IN110 Natural Convection Incubator 108L, 115V is designed for precise and reliable sample incubation in low-temperature applications. With a spacious 108 L (3.8 cu.ft.) capacity, this unit accommodates a wide range of samples and ensures consistent temperature control from at least 5°C above ambient up to +80°C. The high-resolution display provides 0.1°C accuracy for both set points and actual values, allowing precise adjustments. Its adjustable parameters include temperature in Celsius or Fahrenheit, air flap position, and program timing, with a SetpointWAIT function that begins processing only once the set temperature is reached. Enhanced with AtmoCONTROL software for data management, a durable stainless steel interior, and an autodiagnostic system with overtemperature monitoring, this incubator combines efficiency, safety, and ease of use. INCLUDED: The Memmert IN110 Natural Convection Incubator 108L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Maximum Temperature Homogeneity The particular CerAlTop ™ plate, in aluminum alloy coated with a cer (more)amic layer, ensures a formidable temperature homogeneity over the entire surface of the plate itself, up to 370°C and at the same time excellent resistance to chemical agents and ease of cleaning. Fontal panel The control panel is extremely intuitive. By turning the left knob it is possible to adjust the temperature (up to 370°C), while with the right one you can act on the agitation (up to 1500 rpm). Maximum Protection, IP 42 AREX magnetic stirrers guarantee a high level of safety and protection for the user, also thanks to the raised control panel and the special channel for conveying liquids (in case of spills). The control panel is easily accessible, away from heat sources that are dangerous for the operator and protected from any liquid leaks by means of a special conveyor channel. The particular geometry prevents accidental overflows of liquid being processed from entering the internal parts of the instrument. Thermoregulation of the liquid being processed For unmatched performance, AREX supports the VTF Fuzzy Logic digital temperature controller. VTF ensures perfect thermoregulations up to 300°C, given the very high level of accuracy of ±0.5°C. In addition, with VTF it is also possible to set the operating time, to better program the temperature control. Low Profile, Attractive Design AREX offers an innovative low profile and a highly attractive design for greater comfort for the user. Even the inclination of the front panel has been carefully studied to facilitate its use. AluBlocks ™, Greater Versatility AluBlocks ™ allow you to perform different heating and stirring experiments with unprecedented flexibility, acting on different types and sizes of tubes. Being modular, they are ideal for creating a workstation that is always customized, capable of supporting tubes of different formats. Made entirely of aluminum, they can be easily placed on the round head heating stirrers for excellent heat transmission and temperature homogeneity. A huge leap forward in productivity, while also saving time, money and counter space.

Sanyo MIR-553 Incubator This was removed from a university lab where it was surplus to requirements. (more) The unit powers up but the power relay is short circuited so it runs overtemp. It is sold for spares/repairs.

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 500 g), plastic box Number o (more)f pieces in the set: 12

F2 Mass Standard - knob weights, wooden box. Nominal value - 1000 kg.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. Versatility of Applications Varied Standards: The set consists of 12 flat polygonal sheets and 12 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.