Thermo Scientific 4121 Series 3 Water Jacketed CO2 Incubator Inkubator 184L (2021)

Binder KB 115 Lab Cooling Incubator This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in reasonably good cosmetic condition but has marks from age and use. Includes 4 shelves.

Nuaire 5810E CO2 Incubator Lab This item was removed from a university where it was surplus to requi (more)rement. It is in good cosmetic condition and powers on. (Thermometer not included) The CO2 did not increase on testing, and the sample pump failed, therefore it is listed as Spares/Repair.

Heidolph Incubator 1000 Heating Module The Incubator 1000 Heating Module has been meticulously desig (more)ned to provide optimal heat distribution, ensuring top-tier results in your laboratory applications. Powered by a 300-watt output, this heating module guarantees swift heat-up times within your incubation system, drastically reducing waiting periods and increasing efficiency. Thanks to its wide temperature range, this module can comfortably accommodate thermophilic organisms by reaching an impressive maximum temperature of 65°C. Built with the importance of consistent and rapid heat dissemination in mind, the Incubator 1000 Heating Module is an indispensable tool for any laboratory focused on maintaining high performance and reliable results.INCLUDED: The Heidolph Incubator 1000 Heating Module includes: - Power Cord - Three Year Manufacturer's Warranty

Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guara (more)ntees excellent thermal homogeneity and stability (±0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3 to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP) FOC Connect is supplied with the MODBUS communication protocol.

Thermo Heraeus B6060 culture and incubation oven. Capacity 57L. Temperature range from room temperat (more)ure + 5ºC to 70 °C.   Stability at 37°C ±°C 0.8. Air regulation adjustment. Digital display. Interior dimensions 403*380*370 mm; exterior 744*552*535mm. 52 kg. Includes 2 shelves. User Manual. The Heraeus B6060 incubator is a high-quality piece of equipment designed to provide a precise and stable incubation environment at a temperature of 70ºC. With a capacity of 57 liters, this stove is ideal for a variety of applications in research laboratories, pharmaceutical industry, biotechnology and more.Equipped with a state-of-the-art digital temperature controller, the Heraeus B6060 oven ensures a uniform temperature throughout the interior, which is essential for the growth of cell cultures, the fermentation of microorganisms and other incubation applications. In addition, this oven features with a forced air circulation system that helps maintain homogeneous heat distribution, ensuring that all samples are incubated evenly and efficiently. With its robust and durable construction, the Heraeus B6060 incubator is an excellent choice for any laboratory requiring reliable performance and accurate results.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition with only minor usage marks. We have been able to connect the unit to the PC, but unable to test it further. It will likely require servicing before it is used. PC Equipment:-Dell Optiplex GX280 with Dell Monitor, keyboard and mousePSC QS6000 Plus Barcode Scanner PC has the following software:-Applied Biosystems 7900HT Version 2.3 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2 External dimensions -D85 W54 H76cm

Induction cooker EV 813 from Everglades with a Tefal pressure cooker The induction cooker is adjusta (more)ble to warm milk to deep fry. Capacity cooker: 6L Voltage: 240V Max power: 1900W Dimensions: (H x W x D): 270 x 195 x 335 mm.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 class standard: stainless steel wire Nominal value: 500 mg Material: stainless steel Highest Precision and Accuracy F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Applications 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.