Thermo iEMS Incubator Shaker for 3x 96-Well Microplate Model 1415 (Year 2013)

Temperature range: -10°C to +50°C Temperature fluctuation: ±1°C (ON-OFF control), ±0.2°C (PID contro (more)l) Temperature uniformity: ±0.5°C (set 37°C, ambient 20°C, no load) Temperature program operation: 3-steps, 0.5 hr ~ 99.5 hr 1-99 repeating, or unlimited Capacity: 126 L Dimensions (HxWxD): 1020 x 700 x 600 mm Inner dimensions(HxWxD):  555 x 620 x 390 mm Weight: 69 kg

Excluding connection gas kit (see pictures for kit)

Temperature range: Ambient + 5°C to 70°C Temperature accuracy: 0.1°C Capacity: 108 L Dimensions (WxH (more)xD): 710 x 760 x 550 mm Internal dimensions (WxHxD): 560 x 480 x 400 mm Weight: 50 kg

This New Brunswick Scientific Classic C24 Incubator Shaker was removed from a university lab where i (more)t was surplus to requirements. The unit is in good working order and has been tested with a digital thermometer (not included). It runs well up to 400rpm. It is in reasonable cosmetic condition but has some fairly heavy usage marks. Internal dimensions - L54 W52 H36cmShaker Platform - 45.5 x 45.5cm Tube stand inside holds 20 x 50ml tubes

Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V provides precise temperature control across a wide working range of 0°C (at least 20°C below ambient) to +70°C, making it ideal for various incubation applications. With a spacious 53-liter capacity, this incubator uses an energy-efficient Peltier heating and cooling system, featuring individually controlled upper and lower elements for optimal temperature uniformity. The advanced ControlCOCKPIT with TwinDISPLAY, coupled with an adaptive digital PID-microprocessor controller, enables intuitive operation and monitoring through high-definition TFT displays. The SetpointWAIT function ensures that process timing only begins once the set temperature is reached, providing additional accuracy. Constructed with a corrosion-resistant stainless steel interior and textured exterior, the IPP55plus is designed for durability and easy maintenance. Safety features include an over- and undertemperature monitor with AutoSAFETY protection, providing visual and acoustic alarms if limits are breached. Additional features, such as three customizable temperature calibration points, an autodiagnostic system for fault analysis, and a maximum chamber load capacity of 176 lbs, make this incubator both versatile and reliable for demanding lab environments. INCLUDED: The Memmert IPP55plus Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark SureTherm CO2 Incubator, 180L, 115V w/ High Heat Decontamination, Split Window Door and O (more)2 Control Cell cultures depend on optimized growth conditions in order to thrive. With precise temperature and CO₂ control, Benchmark’s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C). These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real time”. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.* * Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: ambient +5ºC to 150ºC Setting range: 15°C to 150°C Temperature stability (at 37°C (more)): ±0.1ºC Temperature uniformity within the block (at 37°C): ±0.1ºC Temperature uniformity across similar blocks (at 37°C): ±0.2ºC Display resolution: 1ºC Heat-up rate (ambient to max): 40 min Equipped with a heating block for 24 x 1.5 mL Eppendorf tubes. Dimensions (WxDxH): 205 x 180 x 122 mm Weight: 3.6 kg

Microscope trinocular Delphi-X Observer DX.1153-PLi eyepieces SWF 10x / 25 mm Ø 30 mm lenses with a  (more)correction to infinite (IOS) plane achromatic PLi 4/10/20 / S40 / S100x oil immersion, 60 mm parafocal, plate 190 x 152 mm with mechanical stage built-in x 78 x 32 mm and 3 W of lighting NeoLED ™ SPECIFICATIONS EYE • Super wide field SWF10x/25 mm for the porta-eye Ø 30 mm HEAD Trinocular design Siedentopf tube inclined at 30°. Distance inter-pupillary adjustable between 47 and 78 mm head trinocular standard has a selector of the optical path of three positions (100:0 / 80:20 / 0:100). Correction ± 5 diopters in both eyepieces. REVOLVER HOLDER OBJECTIVES Revolver holder objectives sextuple oriented towards the interior and are mounted on ball bearings of high precision. With screw thread for objectives of 25 mm diameter OBJECTIVES PLANE ACHROMATIC The Delphi-X Observer ™ comes standard with the objectives of the EIS corrected infinity Plane achromatic 4x / 0.10, 10x / 0.25, 20x / 0.40, S40x / 0.65 and S100x / 1.25 oil-immersion APPROACH Approach macro and micrometric coaxial, 100 graduations, accuracy of 1 μm, 100 μm by the rotation, the range of total displacement of about 35 mm Is supplied with a top elevation of the plate adjustable to prevent damage to the sample and the objectives. The focus system coarse has tension adjustment. The focus knobs micrométricos can be changed from left to right (for a magnetic system) in accordance with the preferences of the user STAGE Plate 190 x 152 mm with mechanical stage mechanical integrated right 78 x 32 mm With coating glass-Gorilla resistant to scratches. Stage mechanical for left-handed available upon request (Reference request: Add -L to the product number) CAPACITOR Abbe condenser with tiltable lens A. N. 0.90/1.25 with identification marks of the numerical aperture. Adjustable in height. Iris diaphragm HIGHLIGHTS DIASCÓPICAS • Type-Köhler-intensity adjustable by NeoLED™ 3W with internal power supply 100-240 V NeoLED™ The innovative design NeoLED™ is a combination of LED and custom lens thin specially designed with a short focal length to obtain three main benefits: • You can capture more oblique light from the LED light source, which significantly increases the light output • It requires less energy to reach this level of intensity of light • The greater opening of NeoLED™ allows the optical systems of the microscope to produce images with higher resolutions, very close to the diffraction limit of theoretical optics SENSOR ICARE This sensor allows to avoid the loss of unnecessary energy. The illumination of the microscope automatically switches off shortly after the user stops in front of the microscope CARRY HANDLE The carry handle on the back of the microscope guarantees a safe transportation of the microscope and the tool and the porta-tools integrated to ensure that the right tool is always available PACKAGING Supplied with power cable, protective cover, replacement fuse, user manual and small bottle of immersion oil 5 ml. Case of polystyrene

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.

IKA Microstar 15 Control Overhead Stirrer Speed Range 0/30 to 1000 RPM Viscosity Max. 8,000 mPas St (more)irring Quantity Max. 10 l Features - Hardened glass enclosed, fast response display for maximumvisibility and chemical resistance - State-of-art vibration sensors detect deviations frompermissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kineticsensitive reactions and reminders - Viscosities up to 8,000 mPas and volume of up to 10 l - Continuously adjustable speed between 0/30 – 1,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft®or installing firmware updates - Intuitive and simple handling; touch-sensitive surface forlong service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constantrotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:

Accuris PR2121-N-50BLK qMAX One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml)qMAX Prob (more)e One Step kits are optimized for use with popular TaqMan, Scorpions, and molecular beacon probes. Accuris qMAX™ One Step Kits allow for highly sensitive real time RT-qPCR assays to be performed directly from RNA templates. Workflows are simplified with optimized formulations of ready-to-use 2X qPCR master mix and 20X reverse transcriptase.Optimized buffer includes powerful RNase inhibitors and an extremely thermostable MMLV-derived reverse transcriptase enables robust first strand cDNA synthesis. Accuris Hot Start Taq uses an antibody mediated hot start mechanism allowing for sample preparation at room temperature. Only after an initial incubation at 95C will the Taq become active, so non-specific amplification is greatly reduced. An inert blue dye is included in the Taq master mix to help simplify pipetting and reduce errors.INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2121-N-50BLK qMAX One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty