Thermo Forma Steri-Cult 3311 CO₂ Incubator

Sanyo Laboratory CO2 Incubator Stack  Models - MCO-17AIC / MCO-17AI These were removed from a  (more)university lab where they were surplus to requirements. The units power up and are in good working order. They were tested with a digital thermometer (not included). They are in good cosmetic condition with minor marks from use. 1x Sanyo CO2 Incubator:Model - MCO-17AISN - 90705826 Inside dimensions - D51 W49 H66.5cm3 Shelves 46 x 46cm1 Tray 46.5 x 36.5 x 4cm 1x Sanyo CO2 Incubator:Model - MCO-17AICSN - 10100758 Inside dimensions - D51 W49 H66.5cm2 Shelves 46 x 46cm1 Tray 41 x 31 x 5cm

This Thermo Scientific 3311 Forma Steri-Cult Co2 Incubator was removed from a university lab where i (more)t was surplus to requirements. The unit powers up and has been tested extensively at 37˚C and 5% CO2 as well is 50% humidity. (Testing probes not included). We calibrated it to our working temperature and testing equipment, but will likely need calibrating again upon installation. It is in full working order. It is in good cosmetic condition with minor marks from use.

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V Setting Temperature Range -12°C (more) to +60°C Setting Accuracy Temperature 0.1 °C Chamber Volume 449 L (15.8 cu. ft.) Features - Setting temperature range from -12°C to +60°C - 449 L capacity for various laboratory applications - Equipped with inner glass door for visibility without compromising insulation - Precision temperature control with 2 Pt100 sensors, accuracy to 0.1°C - ControlCOCKPIT with TwinDISPLAY for easy programming and monitoring - Air jacket heating system ensures gentle and uniform all-around heating - Integrated AutoSAFETY with over- and undertemperature protection - Energy-efficient CFC-free cooling system with automatic defrosting The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V is designed to deliver precise and reliable temperature control, with a setting range from -12°C to +60°C, making it ideal for sensitive applications that require exact environmental conditions. This 449 L capacity incubator features an inner glass door, allowing for clear visibility while maintaining insulation. TwinDISPLAY technology on the ControlCOCKPIT provides adaptive digital PID-microprocessor control with high-definition TFT-color displays, enabling seamless adjustments of temperature, fan speed, and program settings. With advanced safety features such as AutoSAFETY over- and undertemperature protection, visual and acoustic alarms, and dual Pt100 temperature sensors for accuracy to 0.1°C, the ICP450 offers optimal reliability. Its energy-efficient CFC-free cooling system includes an air jacket heating concept, ensuring gentle and uniform heating throughout the chamber. The incubator is equipped with AtmoCONTROL software for easy programming and data management, making it an exceptional choice for labs requiring consistent and versatile temperature management. INCLUDED: The Memmert ICP450 Refrigerated Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grids - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immidate realese. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centers or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

ClipTip 12.5 THERMO SCIENTIFIC pipette tips Reference: Clip Tip 94410040 Without filter Packaging: 5 (more) x 96 tips / insert (refill tower) Volume (metric): 12.5 μl Expiry date: 12/2021 Quantity available: 13

Type of movement: orbital Shaking stroke: 4.5 mm Permissible shaking weight (incl. attachment): 0.5  (more)kg Permissible ON time: 100 % Speed range: 200 – 3000 rpm Speed display: scale Timer: yes Timer display: 7 segment LED Time setting range: 1 s – 999 min Operating mode: timer and continuous operation Touch function: yes Dimensions (WxHxD): 148 x 63 x 205 mm Weight: 2.9 kg

B.O.B Stevenson LTD 4047 MN 80355 Centrifugal Fume Extraction Fan Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

Beckman Coulter JLA 8.1000 Fixed Angle Rotor This item was removed from a university lab where it wa (more)s surplus to requirements. The unit is in good condition with minimal wear. No further testing has been conducted. Includes:- 6 x Buckets Specifications:- Max RPM: 8,000 - Model: JLA 8.1000 - Serial No.: 01U 858

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).