Shel Lab SC05A-2 CO2 Series CO2 Incubator

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation. It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level. Internal dimensions 48x58x48cm LWH

Memmert IN750 Natural Convection Incubator 749L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 749 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Large 749 L (26.5 cu.ft.) capacity for versatile applications - High-precision control with 0.1 °C resolution and 1 Pt100 sensor DIN class A - SingleDISPLAY ControlCOCKPIT with adaptive PID-microprocessor controller and high-definition TFT display - SetpointWAIT function ensures process timing starts once set temperature is reached - Inner glass doors with fully insulated stainless steel doors and 2-point compression lock - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on all sides The Memmert IN750 Natural Convection Incubator 749L, 115V provides an expansive 749 L (26.5 cu.ft.) chamber, perfect for applications needing precise temperature regulation. Operating from +20°C to +80°C and capable of maintaining settings as low as 5°C above ambient, it features the user-friendly ControlCOCKPIT with SingleDISPLAY and high-definition TFT display for adjusting temperature (Celsius or Fahrenheit), air flap position, and timer. Its fully insulated stainless steel door includes an inner glass pane with a 2-point compression lock for visibility and safety. Natural convection and a pre-heated fresh air admixture ensure consistent chamber conditions, while AtmoCONTROL software enables efficient data management. Built for durability, it accommodates up to 14 shelves with a max load of 661 lbs, making it ideal for demanding lab settings. INCLUDED: The Memmert IN750 Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP2200eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP2200eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP2200eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Thermo Heraeus B6060 culture and incubation oven. Capacity 57L. Temperature range from room temperat (more)ure + 5ºC to 70 °C.   Stability at 37°C ±°C 0.8. Air regulation adjustment. Digital display. Interior dimensions 403*380*370 mm; exterior 744*552*535mm. 52 kg. Includes 2 shelves. User manual. The Heraeus B-6060 incubator is a high-quality piece of equipment designed to provide a precise and controlled incubation environment. With its uniform heating ability and wide adjustable temperature range, this oven is ideal for incubation applications in laboratories and research centers. It features a digital control system that allows you to easily program and monitor the temperature, as well as a heat-resistant glass door that allows for a clear view of the interior. Additionally, the Heraeus B-6060 incubator is equipped with a safety system that includes temperature alarms and an automatic shutdown in case of overheating. With its compact and durable design, this incubator is a reliable and efficient option for any laboratory that requires precise temperature control during the incubation process.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Optika Inverted Microscope XDS-2 This item was removed from a university laboratory where it was sur (more)plus to requirements. The microscope is in very good used cosmetic condition, showing signs of general use. The lamp powers up and works as intended, and the lenses and objectives appear clear and functional. Specifications: - Model: XDS-2 Included Objectives: - 1 x Optika Plan 4x/0.10 ∞/1.2 - 1 x Optika Plan PH10x/0.25 ∞/1.2 - 1 x Optika Plan PH20x/0.40 ∞/1.2 - 1 x Optika Plan 40x/0.60 ∞/1.2 Eyepieces: - Pair of EW10X/22 Other Features: - Microplate-type sample holder fitted on the stage - Phototube extension for camera attachment

This item has just arrived in our stock. Please enquire for further details.

IKA STARVISC 200-2.5 control Speed Range 0/6 - 2000 rpm Viscosity Max 100000 mPas Setting accuracy s (more)peed ±1 rpm Features - Real-time viscosity display during product development - High-precision viscosity measurement without needing separate samples - User-friendly menu for immediate viscosity calculation - Removable control unit with modern TFT display for safe-distance control - Powerful stirring capability for highly viscous substances - Includes STARVISC 200-2.5 control, various cables, temperature sensor, and tools - Stirring quantity up to 100 l - Brushless DC motor with 130 W input and 84 W output - Supports intermittent operation and displays temperature Measure viscosity and display it, even during product development: the new IKA STARVISC 200-2.5 control torque-measuring stirrer makes it possible. The result can be read in real-time on the display. STARVISC therefore has a broad range of applications. This is particularly helpful during product development: STARVISC already clearly indicates while running research programmes as to whether the stirred substance can be used as desired.INCLUDED: The IKA STARVISC 200-2.5 control includes: - STARVISC 200-2.5 control - WICO STARVISC 200-2.5 C - WH11 - Protective cover for WiCo contact - WiCo power supply - H 67.60 Temperature sensor, stainless steel - USB Cable - USB A to Micro-B, 2 m - USB cable micro A – micro B 2.0 - Offset screwdriver - Screw driver - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ÄKTAxpress is a liquid chromatography system intended for automated, multi steppurification processe (more)s. The system has been developed and optimized for purificationof Histidine-tagged and Glutathione S-Transferase (GST)-tagged recombinant proteins from clarified or crude cell lysates. ÄKTAxpress supports a number of purification protocols containing up to four chromatography steps, for example, affinity chromatography followed by desalting, ion exchange, and gel filtration. Protocols for purification of both low expressed proteins and well expressed proteins are included. Also protocols supporting purification of double tagged proteins and protocols that can be combined with on-column and off-line (batch) tag cleavage are provided. ÄKTAxpress provides the following features: •Automatic purification of up to four samples in a single run. •Purification protocols containing up to four chromatography steps. •Automated on-column affinity tag removal in the first step of purification protocols starting with an affinity/ion exchange chromatography step. •Purification protocols supporting purification of both well expressed and low expressed proteins, double tagged proteins and proteins that have been cleaved off-line. •Up to 50 mg of protein can be purified per sample. •Up to twelve ÄKTAxpress systems can be run in parallel, controlled from one computer (not included). Different purification protocols can be run simultaneously. •The systems can be placed next to each other or they can stand separately if preferred. Flow rate: 0.1 – 65 mL/min Flow rate accuracy: ±2% or ±0.02 ml/min whichever is greater Flow rate reprocibility: RSD < 0.5% Pressure range: 0 – 30 bar Step gradients (quasi-isocratic mixing) formation conditions: Water based buffers with different concentrations of salts Gradient mmix proportions: 5 – 95% Concentration accuracy: ±2%B Linear gradients conditions: Water based buffers with different concentrations of salts Linearity: ±2%B within 20 – 80%B UV monitor wavelengths: 280 and 254 nm set by lamp position and filter Optical path length: 2 nm Opitcal cell volume: 2 µL Detector cell volume: 30 µL Absorbance range: 0.01 – 5 AU Auto zero range: -0.2 – 2.0 AU Linearity, deviation: < 3% up to 2 AU Static noise, short and long term: < 40 μAU Static drift: ±0.1 mAU/h Conductivity range: 0.01 – 300.00 mS/cm Accuracy: Max. ±2% of full scale calibrated range or ±0.1 mS/cm whichever is greater Reproducibility, short and long term: Max. ±1% or ±5 μS/cm whichever is greater Noise: Max. ±0.5% of full scale calibrated range, typically ±0.1% Response time: Max. 4 s (0–95% of step) Internal volume: 24 μl Dimensions (WxdxH): 250 x 490 x 660 mm Weight: 30 kg