Scientific Industries SI-1400 Incubator-Genie Shaking Incubator

This listing is for a Grifols DG Therm IncubatorThe DG Therm is a digital incubator designed for eff (more)icient gel card processing. It can hold up to 24 DG Gel cards and 24 test tubes across two independent incubation zones. The on-screen display shows the remaining incubation time and temperature, and it features a programmable alarm and removable trash bin.

Temperature Range: Ambient +5°C to 50°C CO2 Concentration Range: 0 to 20% CO2 Sensor Technology: TC  (more)Sensor Relative Humidity: <90% at 37°C Humidity Source: Water Pan Lighting: LED Capacity: 40 L Chamber Material: Polished Stainless Steel Interior Dimensions (DxWxH): 355 x 305 x 355 mm Dimensions (LxWxH): 597 x 470 x 465 mm

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation. It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level. Internal dimensions 48x58x48cm LWH

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation. It is in good cosmetic condition with marks from use. Internal Dimensions: L 86cm x W 56cm x H 47cm.Shaking area Dimensions: L 76cm x W 46cm.

Incubator orbital FS Series. Ideal for incubation with agitation of microbiological cultures. Model (more)s: FS-50B (not refrigerated; temperature of RT+5ºC to 65ºC.); FS-70B (refrigerated; temperature 4ºC to 65ºC.). LCD screen. Control of temperature, time and speed of swing digital. Stability ± 0.1 º. Uniformity ± 1°. Variable speed of 30 to 300 rpm. Resolution 0.1 ºC, ± 1rpm. Timer from 1 min to 9999min. Engine without maintenance. Alarms. Capacity FS-50B: 10 kg; 100ml*16/250*10/500*6 (includes 8 clamps for flask of 250 mL). Capacity FS-70B: 15 kg; 100ml*28/250*15/500*8/1000*6 (includes 12 clamps for flask of 250 mL). It shows the price for the model FS-50B. For other models, use the drop-down.

Memmert ICO105 CO2 Incubator 107L, 115V Temperature Range Ambient +5°C to 50°C Temperature Uniformi (more)ty ± 0.3°C at 37°C Chamber Volume 107L (3.8 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO105 CO2 Incubator 107L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO105 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO105 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO105 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO105 CO2 Incubator 107L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - 1 x Stainless Steel Water Tray - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This listing is for a Vibra HTR-220E Balance

The compact FL circulators are suitable for a wide range of cooling tasks and can be placed under th (more)e laboratory bench in a space-saving way. Operating temperature range: -20°C to 40°C Temperature range: -20 to 40 °C Temperature stability: ±0.5°C Temperature setting resolution: 0.1°C Temperature display resolution: 0.1°C Permissible ambient temperature: 5°C to 40°C Maximum return temperature: 80°C Cooling capacity (medium: Ethanol): 20°C: 1.2 kW 10°C: 1 kW 0°C: 0.9 kW -10°C: 0.6 kW -20°C: 0.3 kW Filling volume: 570 g Coolant: R449A Pump capacity flow rate: 23 l/min Pump capacity discharge pressure: 1 bar Dimensions (WxDxH): 500 x 760 x 640 mm Filling volume: 12 to 17 l Weight: 78 kg

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7&quot; colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

Labconco Ampule Pod, with (15) 3/8" ID tubing ports, 15 plugs, 2 clamps and (1) 7547200 Adapter Allo (more)ws for simultaneous freeze drying of up to 15 ampules Polypropylene base has (15) 3/8 in. ID tubing ports each with silicone tubing for attachment of ampules Includes 15 plugs, 2 each clamps and 1 straight stainless steel adapter Adapter attaches to a single valve port on freeze dryer Ampules not included INCLUDED: The Labconco Ampule Pod, with (15) 3/8" ID tubing ports, 15 plugs, 2 clamps and (1) 7547200 Adapter includes: - Plugs x 15 - Clamps x 2 - 7547200 Stainless Steel Adapter - Manufacturer's Documentation - 1 Year Manufacturer's Warranty