RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 Lab

This Thermo Scientific MaxQ 6000 Incubator Shaker Model - 4360 was removed from a university la (more)b where it was surplus to requirements. The unit has a power board fault. It is in reasonably good cosmetic condition with some marks from use. The door also does not close properly. Internal dimensions - D52 x W55 x H67cm1 Shelf - 52 x 54cmShaker Plate - 45 x 45cm It is sold for spares or repairs due to the electrical fault.

PHCBI Cooled Incubator MIR-154 Lab This item was removed from a university where it was surplus to r (more)equirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition internally and externally.

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

Memmert IN55 Natural Convection Incubator 53L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 53 L Features - 53 L (1.8 cu.ft.) stainless steel chamber designed for efficient sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - ControlCOCKPIT with SingleDISPLAY and adaptive digital PID-microprocessor controller for accurate control - Natural convection system ensures consistent and even heat distribution throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air admixture - Autodiagnostic system with adjustable overtemperature monitor for enhanced safety - Max chamber load capacity of 176 lbs with easy-to-clean, durable stainless steel interior The Memmert IN55 Natural Convection Incubator 53L, 115V is designed to deliver precision and reliability for low-temperature applications in laboratory environments. Featuring a 53 L (1.8 cu.ft.) stainless steel chamber, this incubator provides efficient sample storage and maintains a temperature range from at least 5°C above ambient to +80°C. Equipped with a high-precision Pt100 sensor in a 4-wire circuit, the unit ensures stable temperature control, managed through the ControlCOCKPIT SingleDISPLAY with an adaptive PID-microprocessor for quick adjustments. The natural convection system promotes even heat distribution, while an electronically adjustable air flap allows optimal fresh air intake. The durable, easy-to-clean interior supports a maximum load of 176 lbs, and the built-in autodiagnostic system with an adjustable overtemperature monitor enhances operational safety, making it an ideal choice for research and development, pharmaceuticals, and food technology applications. INCLUDED: The Memmert IN55 Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 301650 Large Platelet IncubatorThe Boekel Scientific 301650Large Platelet Incubato (more)r features a patent pending inventory management system,a compressor-less / gas-less design, an onboard thermal graph printer, batterybackup, a downloadable equipment data log, and an easy to use 7 inch industrialcolor touch screen. The agitation system has been designed for continuousquiet operation and to meet mixing requirements. Patent pending Inventory Management System to decrease wastage Gas-less/Compressor-less heating and cooling design Onboard thermal printer for keeping records of temperature data Downloadable event log Massive 7" industrial touch screen with intuitive icons Battery backup in the event of a power failure Two year Warranty Removable shelves with smooth platform designed to reduce label sticking Extended Warranty Available Applications For short term storage of blood platelets for human treatment Click Here to View Product Video INCLUDED: The Boekel Scientific 301650 Large Platelet Incubator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to +70°C Capacity: 57 liters Dimensions (WxDxH): 750 x 610 x 550 mm  (more)Internal dimensions (WxDxH): 405 x 370 x 380 mm

GE Healthcare Packing Tube Assembly HiScale 50 20BH This was removed from a working lab where it was (more) surplus to requirements. The unit is brand new and unused but the box has been opened. 1x GE Healthcare Packing Tube Assembly HiScale 50 20BHC/N: 28980248

Manufacturer: Thermo Fisher Scientific Model: KingFisher Flex Purification System YoM: 2015 Descrip (more)tion: The KingFisher Flex purification system provides plate-based handling (mix, capture, transfer, release) of magnetic particles for bead-based nucleic acid and protein affinity purification procedures. This easy-to-use instrument provides excellent reproducibility and minimizes the hands-on time required for DNA, RNA, and protein isolation from a wide range of sample types. The Thermo Fisher Scientific KingFisher Flex magnetic particle processor offers great flexibility for high-throughput purification of DNA/RNA, proteins and cells from virtually any source. Features: - Flexible, open system lets you customize your own purification process. - Patented magnetic particle processing technology lets you set your protocols and walk away. - Fully automated system yields high-speed purification of nucleic acids, proteins and cells. - Open and flexible system lets the customer use anymagnetic particle-based kit tomeet the application demands. - Easy-to-use Thermo Scientific™ BindIt™ Software provides instrument control, protocol creation andmodification. - Ready-made protocols for different type of applications are available. - Easy installation (ready to run in 10 minutes or less). - User-friendly graphical interface. - Four different magnetic head formats for wide volume range (20–5,000 µL). - With 24 configurations, customers can raise the processing volume up to 5mL, resulting in increased yield of the purified product. - Expands sample volume by 10-fold with the 24-well format. - High-throughput system processes up to 96 samples in 30 minutes. - Pre-loaded programs to perform protocols with MagMAX nucleic acid isolation kits. Application Areas: - Genetic testing - Microbial identification - Plant genetics - Evolutionary studies / Phylogenetics - Protein identification - Immunology - Genomics and proteomics - Target identification - Veterinary assays - Biomarker discovery - Quality control - Forensics The item is very complete and includes: - Thermo Fisher Scientific 711 KingFisher Flex Purification System - Pos. 6: 240 74430; KF Flex 96 DW head - Pos. 21: 030 0024;Tool 2 mm allen key, handled - Pos. 255: 240 75420; KF Flex 96 KF heating block - BindIt Software 3.3 - Connecting Cables - Instruction Manual (please see pictures for some other accessories) Condition: The whole system is in excellent like new cosmetic condition, 100% functional tested and ready to be operated.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 5409706004 The Eppendorf FA-45-30-11 Fixed Angle Ro (more)tor, Cat. #: 5409706004, is a centrifuge rotor designed for use with the Eppendorf 5427R centrifuges. This rotor has a maximum speed of 14,000 RPM and a maximum relative centrifugal force (RCF) of 20,817 x g. It can accommodate a maximum capacity of up to 30 × 1.5/2.0 mL tubes. INCLUDED: The Eppendorf FA-45-30-11 Fixed Angle Rotor includes: - FA-45-30-11 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-30-11 Fixed Angle Rotor, Cat. #: 5409706004 SpecificationsMaximum Speed14,000 RPMMaximum RCF20,817 x gMaximum Capacity30 × 1.5/2.0 mL tubesRadius9.5 cmCentrifuge CompatibilityEppendorf 5427R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }