RS Biotech Galaxy R+ CO2 Incubator 170-300 Plus Lab

Maximum temperature: 80°C Equipped with a 12 slot rotisserie

This RS Biotech Galaxy S+ CO2 Laboratory Incubator was removed from a university lab where ti was su (more)rplus to requirements. The unit powers up and has been professionally serviced. It is in full working order. A full report is available on request. It will require calibration upon installation. It is in good cosmetic condition with minor marks from use. 3 Shelves - 52 x 42.5cm

Genlab Model LCI/12V/PDIG Lab Incubator This was removed from a university lab where it was surplus  (more)to requirements. The unit powers up and is in good working order. (Digital thermometer not included) 3 Shelves - 60 x 60cm

Binder CB-S 170 CO2 Incubator Double Stack Lab This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1400ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1400ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1400ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 151500 Digital Forced Air Incubator, 5.0 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 5.0 cu. ft. (141L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Two internal auxiliary outlets provides power for multiple accessories to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty

AES SMASHER Sample Grinder / Blender / Mixer CHEMUNEX /BIOMERIEUX AESAP1064 Smasher is a high-perfor (more)mance peristaltic grinder that ensures sample homogeneity prior to microbial detection or identification tests. This innovative automated system is part of the AES Blue Line range, which offers fully automated systems for food microbiological analysis laboratories. Digital control, keyboard and LCD screen Elapsed time display by bar graph Adjustable speed (strokes/minute): slow (500), normal (560) and fast (620) Grinding capacity: bags from 80 to 400 ml Removable stainless steel blades Motor and device protection: electronic circuit breaker, access to the chamber impossible during operations, door with integrated start/stop system Power supply: 230 V ± 10% / 50-60 Hz / 0.5 A Adjustable timer: 10 s to 3 min or continuous Dimensions: W 400 mm, H 330 mm, D 380 mm Weight: 21 kg Lower part seal damaged Containment tray, in poor condition

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Buchi Distillation Chiller B-741 Lab This item was removed from a university where it was surplus to (more) requirement. It powers on but is in poor cosmetic condition, we are unable to test it further at our facility. The unit is sold for spares/repairs as we believe it will need quite a bit of remedial action to get it working properly. It is missing one of is feet.

Thermo Fluoroskan Ascent 374 Microplate Reader Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

Leica CTR 6000 TCS SP5 Laser Scanning Confocal Microscope This system was removed from a laboratory  (more)where it was surplus to requirements. The system powers on, with all units functional, including the stage and light sources. According to the previous owner, the system features a Leica SP5 confocal with 3 PMT and 2 hybrid detectors, along with an FCCS system that includes 2 SPAD detectors. The filters for the detectors are beginning to delaminate and will need replacing. The SP5 computer is relatively new and has been updated to Windows 10. A full environmental chamber for temperature and CO2 control is also included. The system consists of: - TCS SP5 Control Desk, Microscope, and Scan Unit (Serial No. 510000038, Year: 2007) - Leica CTR 6000 Controller (Serial No. 280210) - Leica CMS Detection Unit (Part No. BS054407) - Leica APD Detection (Serial No. 65031) - Leica Scan Head/Trigger Box (Serial No. 0051) - Leica Switch Console V3 (Serial No. 0028960) - Leica Cooling Fan and Flexible Duct (Part No. 1531229001) - Leica Mercury Lamp Box (Type 11307072071/BZ) - LEJ Mercury Bulb Controller (Type ebq 100mc-L, Serial No. 06 2380802161, 217 hours bulb run time) - Leica Stage Controller (Part No. 11505180) - The Box polycarbonate microscope enclosure - The Cube CB02A Enclosure Heater with probe (Serial No. 10585) - The Brick Air Humidity and CO2 Regulator (Serial No. 10654) - Gecomp PC running Windows XP Pro (Serial No. 071362) - HP Z4 PC running Windows 10 (Serial No. CZC026C55L, Product No. 1JP11AV) - 2 x NEC 1990SXi Monitors (Serial Nos. 6Z009731YB, 6Y008209YB) - Cherry Keyboard (Model MY 3000 USB, Serial No. G0006934) - HP KB-1469 Keyboard (Serial No. 803180-L31) - 2 x HP Mice (Part Nos. 672651-001, 458407-002) The microscope is fitted with five objectives: - Leica 784 HCX PL APO 100x/1.4-0.7 oil cs - Leica 510 HCX PL APO 63x/1.4-0.6 oil cs - Leica 214 HCX PL APO 20x/0.70 1MM corr bl - Leica 506251 HCX PL APO 40x/1.25-0.75 oil - Leica 506279 HCX PL APO 63x/1.2 W corr cs Additional components: - Twin binocular eyepieces HC PLAN s 10x/125 M - 7 x colour filter and mirror blocks, 2 x filter block covers - 12 x stage parts - 1 x humidity water cylinder for The Brick Included Software & Manuals: - Leica Software Discs: Confocal Software v. 2.585 (2x), LAS AF v. 2.73-9723, SP5 WS Premium Recovery, SP5 SP8 Standard G4 Recovery W10, SP5 Workstation Recovery - 2 x copies of Windows XP Professional OS - Manuals: Newport PR 50 compact high-speed rotation stage, Coherent Sapphire 488-20 & 410-10 OEM Laser, The Brick operating manual, The Cube 2 temperature controller manual

F2 Mass Standard - carrier weights. Nominal value - 10 kg.