Mini Lab incubator ICT 28 FALC

This listing is for a stack of 2 Eppendorf Innova S44i Shaking Incubator.The unit is in full working (more) condition and is ready for immediate release.The Eppendorf Innova S44i Shaking Incubator is a highly adaptable and spacious shaker designed for laboratory environments. It incorporates advanced technology and precise controls, making it ideal for various applications.Key Benefits:Versatility: Suitable for a wide range of laboratory applications, including cell culture and microbiology.Space Efficiency: Stackable design saves valuable laboratory space while increasing capacity.Precise Control: Advanced temperature and shaking control ensure consistent experimental conditions.Key Features:Temperature Control: Heats up to 80°C with ±0.1°C accuracy at 37°C and ±0.25°C uniformity.Advanced Shaking Mechanism: 2.5 cm orbit with 20 – 400 rpm speed, adjustable in 1 rpm increments, ensuring smooth agitation.LED Lighting: Photosynthetic LEDs with adjustable intensity for optimal growth of phototrophic organisms.User-Friendly Interface: Multi-touch capacitive display for easy monitoring and user management.Stacking Capability: Can stack up to three units, all operating at max speed for enhanced throughput.Specifications:Dimensions: 118.2 x 95.8 x 63.1 cm (46.5 x 37.7 x 24 in)Height: 115.8 cmWeight: 198 kg (437 lb) without accessoriesPlatform Size: 76 × 62 cm, supporting a maximum load of 35.4 kgTemperature Range: Up to 80°CTimer: Set from 0.01 to 95.59 hours with continuous operation capabilityPower Supply: 120 V, 50/60 HzCommunication Ports: USB and Ethernet for data transfer and connectivity

Memmert IN450plus Natural Convection Incubator 449L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20 to +80°C with a working range at least 5°C above ambient - Internal volume of 449 L (15.9 cu.ft.) for large capacity applications - Precise temperature control with 0.1°C setting resolution using 2 Pt100 sensors DIN Class A in a 4-wire circuit - ControlCOCKPIT with TwinDISPLAY offers advanced PID-microprocessor control and two high-definition TFT-color displays - Natural convection with adjustable pre-heated fresh air admixture through electronically controlled air flap - Digital timer with backwards counting, adjustable from 1 minute to 99 days - Two stainless steel, electropolished grids, with a max chamber load of 661 lbs (300 kg) - AtmoCONTROL software for data logging and program management via USB or Ethernet interface The Memmert IN450plus Natural Convection Incubator 449L, 115V is engineered for precise temperature control and optimal efficiency, making it an ideal choice for various laboratory applications. With an internal volume of 449 liters (15.9 cubic feet), this large-capacity incubator provides ample space for accommodating multiple samples and materials. The ControlCOCKPIT TwinDISPLAY system features an adaptive digital PID-microprocessor controller with dual high-definition TFT-color displays, enabling users to precisely set and monitor temperatures. The incubator's temperature range of +20 to +80°C, combined with a 0.1°C resolution, ensures highly accurate thermal conditions. Dual Pt100 sensors in a 4-wire circuit provide additional temperature monitoring, automatically taking over if an error is detected. Designed for flexibility and safety, the IN450plus offers advanced features like the HeatBALANCE function, which allows adjustments to the heating distribution between the upper and lower circuits from -50% to +50%, ensuring consistent temperature uniformity. Natural convection, combined with electronically controlled air flap adjustments, facilitates an even admixture of pre-heated fresh air. The unit is equipped with comprehensive safety measures such as AutoSAFETY and adjustable overtemperature monitors. Additionally, the AtmoCONTROL software offers intuitive programming and data logging capabilities via USB or Ethernet, making it simple to store and manage programs even in the event of a power failure. Built with a robust stainless steel interior and reinforced with deep-drawn ribbing, this incubator is both durable and easy to clean, making it a reliable choice for rigorous laboratory environments. INCLUDED: TheMemmert IN450plus Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP2200eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP2200eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP2200eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP2200eco Peltier-Cooled Forced Circulation Incubator 2140L, 115V includes: - 6 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity for flexible storage and temperature control - Setting temperature range from 0°C to +70°C with 0.1°C accuracy - Energy-saving Peltier heating/cooling system integrated in the rear - ControlCOCKPIT with adaptive multifunctional PID-microprocessor controller and high-definition TFT-color display - Process time starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration values for precise control - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel exterior The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V offers precise temperature control with an energy-efficient Peltier heating and cooling system. Designed for laboratory environments, this incubator features a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, ensuring consistent results across a variety of applications. The ControlCOCKPIT adaptive multifunctional PID-microprocessor controller with a high-definition TFT-color display provides intuitive control, while the SetpointWAIT function ensures that processes only begin once the desired temperature is reached. Built with a 53-liter stainless steel interior, this incubator is both robust and easy to clean, making it ideal for long-term use. It supports up to four shelves with a maximum chamber load of 176 lbs, providing ample space for different sample sizes. Safety is a priority with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and an autodiagnostic system for fault analysis. With its durable textured stainless steel exterior, the IPP55 is built to withstand the rigors of daily laboratory use while maintaining high performance and reliability. INCLUDED: The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Julabo CORIO C-BT5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 5L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-BT5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle SIEVA-3 Filtration Centrifuge w/ 500ml Perforated Centrifugal Basket Speed Range 200 to 10,0 (more)00 RPM Max. RCF 7,825 x g Max. Capacity 500ml Features - Ideal for cake filtration and decantation - Advanced microprocessor controls with adjustable accel/decel rates - Program storage up to 99 settings - Transparent viewing port for close sample monitoring - Touch panel operation and LED status indicator - Energy-saving standby mode - Optional external temperature equalization ports for heating or cooling - Stainless steel housing for corrosion resistance and easy cleaning - 500ml perforated and non-perforated baskets available - Four filter mesh sizes ranging from 7µm to 50µm - Side drain for easy removal of clarified liquids The Hermle SIEVA-3 Filtration Centrifuge with a 500ml perforated centrifugal basket is specifically designed for efficient and precise cake filtration. This bundle includes the 500ml perforated basket, offering immediate usability and versatility. Capable of reaching speeds up to 10,000 rpm and generating a maximum RCF of 7,825 x g, the SIEVA-3 ensures optimal sample separation. Its stainless steel housing and components provide exceptional durability and corrosion resistance, while the transparent lid with a viewing port allows real-time monitoring of your process. A side drain makes it simple to remove clarified liquids, enhancing operational convenience. Advanced microprocessor controls elevate the functionality of the SIEVA-3, enabling speed adjustments in rpm or RCF, customizable acceleration and deceleration rates, and a programmable end-of-run alarm tone. With its user-friendly interface, saved programs can be easily retrieved, making repetitive tasks seamless. Additional features include an automatic lid lock, imbalance switch-off for enhanced safety, and a quick key for short runs. The SIEVA-3 is a reliable, high-performance solution for laboratories requiring precise and efficient filtration. INCLUDED: The Hermle SIEVA-3 Filtration Centrifuge w/ 500ml Perforated Centrifugal Basket includes: - Z600-500-P 500ml Perforated Centrifugal Basket - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This revolutionary training arm provides complete venous access for IV therapy and phlebotomy, plus  (more)sites for intramuscular and intradermal injections. An extensive 8-line vascular system allows students to practice venipuncture at all primary and secondary locations, including starting IVs and introducing Over the Needle IV Catheters. The venous system simplifies setup with only one external fluid bag supplying artificial blood to all veins simultaneously. The dorsal surface of the hand includes injectable metacarpal, digital, and thumb veins. The antecubital fossa includes the median cephalic, median basilic, and median cubital veins. Venipuncture can also be performed along the basilic, cephalic, accessory cephalic, and median antebrachial veins. Intramuscular injections may be performed in the deltoid muscle and intradermal injection sites are located in the upper arm. Intramuscular injections into the deltoid muscle are enhanced by the soft, lifelike skin and by the natural bony landmarks in the region. Intradermal injections using distilled water will create characteristic skin welts at designated sites on the upper arm. The realism of the Life/form® Advanced Venipuncture and Injection Arm is truly amazing. The soft, flexible fingers are molded separately with extreme attention paid to every detail – right down to the fingerprints! Flexion of the wrist helps students develop manipulation skills. The replaceable skin rolls as the veins are palpated, and a discernible pop is felt when entering the veins. The Life/form® molding process reproduces the fine details of the skin to make the arm look and feel alive. Valves in the veins can be seen and palpated on the skin surface. Simulated veins and skin are completely replaceable to keep this training arm looking and working like new. Under normal use, hundreds of injections may be performed before the veins or skin need to be replaced. Complete replacement kits are available and easy to use. To extend the life of the veins, an aerosol sealant is available to seal punctures and prevent leakage.Includes 2 uarts of simulated blood, 3 cc syringe, 12 cc syringe, needle, two fluid bags, instruction manual, and soft carry case.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.