Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

This Gallenkamp Shaking Incubator, Cat no. IOX400.XX2. Cr was removed from a university lab where it (more) was surplus to requirements. The device starts up with the shaking component functioning properly, however, the heating component is not operational. Therefore, it is listed as Spares or Repairs. It is in reasonably good cosmetic condition with minor marks.

Glas-Col Unit Pulse Platform Incubator This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and has been tested with a digital thermometer (not included). Ran at full RPM(1200) with no issue. It is in good cosmetic condition internally and externally.

Binder CB-S 170 CO2 Incubator Double Stack Lab This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

This listing is for the Waters Acquity UPLC H-Class bio systemThis system is in good working conditi (more)on and is being sold with all parts included in the photos, all cables and software included for this system to run.Whats included PDA DetectorBioSample ManagerBioQuaternary Solvent ManagerColumn HeaterSolvent RackThe Waters Acquity H-Class Bio UPLC System is a low- dispersion, high-pressure quaternary LC system that contains an inert flow path that, when combined with four-solvent mixing and auto blend Plus technology, facilitates easy buffer preparation without pH adjustment. Conquer Scientific offers a wide variety of module customization

Double measurements everywhere. Designed so that the single press of a button triggers a calibration (more), measurement or review of the stored data. Intelligent Sensor Management (ISM®) ISM® leaves nothing to chance! Calibration data and history are stored in the sensor and automatically transferred upon connection to the instrument. ISM® meter and sensors - a great match The electrode kit contains the instrument and two ISM® sensors. You can benefit from its free features immediately! Specifications - SevenGo Duo pH / Cond meter SG23-EL-Kit Parameter: pH; Conductivity; ORP Channel: Double channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM; InLab 738-ISM PH measuring range: 0 - 14 PH resolution: 0.01 Accuracy pH (±): 0.01 Measurement range (2): 0.1µS / cm - 500mS / cm Conductivity resolution: 0.01 ... 1 Conductivity accuracy (±): 0.5% Measurement range mV 0 Resolution mV: 1 Accuracy mV (±) 1 Temperature range (2): -5 ° C...105°C Temperature resolution: 0.1°C Temperature accuracy (±) pH: ± 0.5 / Cond: ± 0.2 Portable: Yes Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 99 measurements Degree of protection: Watertight and dustproof (IP67) Languages  English Memory size  99 measurements Meter Type  Portable Dual-Channel mV measuring range  -1999..1999 mV

The HI 8427 is a portable pH/mV simulator designed specifically for calibrating pH and mV (ORP) mete (more)rs. Two calibration ranges are provided from 0 to 14 pH with temperature compensation and from -1900 to 1900 mV. A high impedance button and leakage LED are also provided to verify if the connection cable and pH meter insulation are in perfect condition. The instrument has a BNC output connector. Range pH: 0 to 14 in steps of 0, 2, 4, 7, 10, 12, 14 Range mV: -1900 to 1900 in steps of -1900, -350, 350, 1900 Accuracy pH: ±0.1 Accuracy mV: ±2 Temperature compensation: 0°C to 50°C High impedance test: 1010 Ω Power supply: 9V battery Battery life: 100 hours of continuous Dimensions (DxWxH): 180 x 80 x 30 mm Weight: 300 g

LevTech (Sartorius) DB-200E Magnetic Stirring System for Drum Impeller speed : 0–180 RPM. Ambient te (more)mperature : 4–30°C. Max humidity : 75%, Non-Condensing. This system includes; – Drive machine LevTech DB-200E ( with 6-magnet charger ) – 2x 500L plastic containers. – 2x stainless steel dolly for plastic containers.