Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V

New Brunswick Innova Model 4330 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The unit heats but does not cool. The shaking works, but requires maintenance. It is sold for spares/repairs.

New Brunswick Innova 4400 Floor Standing Shaking Incubator Double Stack These were removed from a u (more)niversity lab where they were surplus to requirements. They have been fully tested to incubate and shake by a service engineer. They are in full working order. Inside dimensions - D57 W93 H44cmPlatform - 46 x 77cm They come with brackets for stacking, but there are only 3 feet and one of them is broken.

Panasonic MCO-170AICD-PE CO2 Incubator These were removed from a university lab where they were surp (more)lus to requirements. Both units power up and have been tested with a digital thermometer (not included). It is in full working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

Yamato IC-803CW General Purpose Incubator with Window 318L, 115V Temperature Range Ambient +5°C to  (more)80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 318L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 318L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-803CW General Purpose Incubator with Window 318L, 115V includes: - 4 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN75 Natural Convection Incubator 74L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 74 L Features - 74 L (3 cu.ft.) capacity for versatile sample accommodation and efficient use of space - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Display resolution of 0.1°C for both set point and actual values - Adjustable parameters including temperature (Celsius or Fahrenheit), air flap position, and program time - SetpointWAIT function ensures process time starts only once set temperature is reached - Calibration with three selectable temperature values for precise adjustments - Language options: German, English, Spanish, and French - Stainless steel interior with a max chamber load of 264 lbs, resistant to corrosion and easy to clean - Autodiagnostic system and overtemperature monitor for enhanced safety The Memmert IN75 Natural Convection Incubator 74L, 115V is designed to provide precise temperature control and reliable performance for low-temperature applications. With a spacious 74 L (3 cu.ft.) capacity, this incubator offers versatile sample accommodation and even heat distribution through its natural convection system. Equipped with a Pt100 sensor in a 4-wire circuit, the IN75 maintains temperature accuracy to 0.1°C, managed through a SingleDISPLAY digital PID-microprocessor controller. Additional features include AtmoCONTROL software, allowing efficient data management and programming via Ethernet, and an autodiagnostic system with an overtemperature monitor for enhanced safety. Its easy-to-clean stainless steel interior and robust design make it ideal for rigorous lab environments. INCLUDED: The Memmert IN75 Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heating Mantle EM0500/CE - 500 ml ELECTROTHERMAL / BARNSTEAD 500ml Capacity 230VAC 50/60Hz, 200W E (more)lectrical Requirement Chemically resistant polypropylene outer casing Maximum element temperature 450°C

Complete UV-VIS operation from 195 nm to 800 nm. 7 mm Pathlength, 10 µl Volume Double beam optics (R (more)eference and Sample Paths). Eight absorbance ranges via scrolling up and down controls. Sensitivity levels available for over 95% of all applications. Digital read-out of absorbance and wavelength. Analog outputs for absorbance and wavelength available at rear of instrument. Absorbance and wavelength remote control available via rear connector contact closures. Scrolling selection of wavelength.

Bruker MicrOTOF Q Mass Spectrometer This item was removed from a university laboratory where it was  (more)surplus to requirements. The mass spectrometer powers on and is in great condition with minimal wear. No further testing has been conducted. Specifications:- Model: micrOTOF-Q - Serial No.: 228888.00074 Included Software:- I/O and Security Software and Documentation - Version: 1.16 - HP / Hewlett-Packard REV.B - CD Kit: 443200-404

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

IKA TWISTER, 4 pcs. Magnetic stirrer, 4 pcs. RPM Range 100 - 3000 rpm Weight 0.6 kg Power 10W Feat (more)ures - Universal & Compact: Versatile mixing device with a magnetic drive. - Multi-Position Capability: Expandable up to 30 stirring positions. - High Performance: Mix up to 5 liters at max speed of 3000 rpm. - Versatile Attachments: Transforms into a stirrer or a shaker. - Innovative Operating Concept: Intuitive 360° LED glass display. - Robust & Safe: High protection class IP 66 for harsh conditions. - Award-Winning Design: Recognized with the Reddot Award 2022. TWISTER is a universal and compact mixing device with magnetic drive. TWISTER SET 4 is multi-position magnetic stirrer with four drive units. In the default version, TWISTER is a powerful single-position magnetic stirrer for mixing up to 5 liters at a maximum speed of 3000 rpm and a viscosity of up to 500 mPas. By connecting additional TWISTER stirring units (available as accessories, ID no. 0020112621), TWISTER can be expanded to a multi-position magnetic stirrer with up to 30 stirring positions.* The stirring positions can be controlled either separately or simultaneously (leader-follower principle). Versatile accessories With the multi-position stirring attachment TW.IX, the drive is transformed into a magnetic stirrer with 9 stirring positions for efficient mixing of sample vessels with small volumes (8 - 60 ml). The TW.VX shaker attachment transforms the universal magnetic drive into a vortex or orbital shaker. Innovative operating concept TWISTER enables a new way of interaction between user and laboratory instrument. Via the intuitive and chemically resistant 360° LED glass display, all information is intuitively conveyed without any alpha-numeric display. During operation, either the speed or the power required for stirring can be displayed. For example, viscosity changes can be observed and displayed as a percentage. Mixing can be started by pressing a button as well as (thanks to integrated beaker recognition) by placing or touching the beaker. The reverse function changes the direction of rotation at definable time intervals. This leads to a significant improvement of the mixing result, especially with samples that are difficult to mix. Robust and safe The high protection class IP 66 allows operation under harsh conditions. TWISTER can thus be cleaned under the tap, for example, or operated in an incubator at temperatures up to 40°C. The compact and innovative design has already been awarded the reddot Award 2022. It is particularly suitable for use in laboratories with limited space. * Depending on the number of devices, a different power supply may have to be used. The included power supply is designed to power up to four devices. INCLUDED: The IKA TWISTER, 4 pcs. Magnetic stirrer, 4 pcs. includes: - TWISTER S099 (4 pcs.) - TW.PWR.1 Power supply - IKAFLON® 25 Magnetic stirring bar (4 pcs.) - Two Year Manufacturer's Warranty