Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a univer (more)sity lab where it was surplus to requirements. The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it. The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed. It is in excellent cosmetic condition with some minor marks from use. 4 Shelves - 49.5 x 49.5cm Internal dimensions - D52 W50 H55cm

Thermo Cytomat 2 C-LIN Automated Incubator Lab This item was removed from a university where it was  (more)surplus to requirement. The unit has been professionally serviced and is in full working order. The full-service report is available on request. This item also includes the following: 14 x Cytomat P35 Microplate Racks. 1 x Microscan MS-3-Laser BAR Code Scanner - Type FIS-0003-0007G.

Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V Temperature Range Ambi (more)ent +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 159L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 159L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-603CR General Purpose Incubator with Communication Port 159L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert ICP 400 cooled Incubator. Temperature range from 0ºC up to +60ºC. Model Size 53 L. Stainless (more) steel. Closed air jacket heating on all sides. Motorised ventilation in the working chamber adjustable in 10% steps (20%-100%) through controller. Highly efficient automatic defrosting system. Microprocessor 3 point controller. Multi-functional programming (menu on 5-digit-LED digital display) of a nearly unlimited number of ramps. Serial interface RS232 incl. The Memmert ICP 400 cooled incubator is a high-quality piece of equipment designed to offer precise temperature control in laboratory applications. With its integrated cooling system, this oven allows you to maintain a constant and uniform temperature inside, making it ideal for storing and cooling sensitive samples. In addition, it has a large capacity of 400 liters and an intuitive interface that makes it easy to use and program. With the Memmert ICP 400 cooled incubator, you can guarantee the integrity and stability of your samples at all times.

Benchmark MyTemp Mini Digital Cooling Incubator With digital temperature control, the MyTemp incubat (more)ors provide convenient “set and walk away” operation, eliminating the need for external thermometers and repetitive “fine tuning” of an analog control knob. Simply choose the desired temperature and the incubator immediately begins to heat up or cool down while accurately monitoring the chamber temperature and conveniently displaying the temperature in real time on the large LED control panel. Despite a modest footprint of 14.5" x 13″, the MyTemp incubators feature large internal chambers, capable of storing flasks and bottles up to 2 liters. In addition, the incubators include two adjustable shelves and an internal outlet for powering small shakers, rockers and other instrumentation. A mini nutating rocker (supplied with both flat and dimpled mats) is available for agitation of samples during incubation. INCLUDED: The Benchmark MyTemp Mini Digital Cooling Incubator includes: - Two Adjustable Shelves - Internal Outlet - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis This was removed from a un (more)iversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

Job Lot of 6 Hewlett Packard 1100 Series HPLC Units Spares or Repairs These were removed from a labo (more)ratory where they were surplus to requirements. All items are untested and are in reasonably good used condition. Due to the items being untested and missing various parts, this job lot is listed as Spares or Repairs. Included is; Hewlett Packard 1100 Series HPLC Units: 1 x G1316A Column CompartmentSerial No. DE64302229Missing front faceplate 3 x G1314A Variable Wave DetectorSerial Nos. JP11614743, JP64202341, JP11615583All missing detector parts and one missing rear communication board 1 x G1311A Quaternary PumpSerial No. DE70301670Missing valve parts 1 x G1312A Binary PumpSerial No. DE43616189Missing a channel pump 3 x 1100 Series Solvent Trays 1 x 1200 Series Solvent Tray Agilent Technologies 1200 Series top and bottom casings for G1322A De-gasser

Arctiko ULUF 125 -86°C Ultra Low Undercounter Freezer Temperature Setting -40°C / -86°C Volume 3.3 c (more)u. ft. (94L) Cooling System Single System / Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - Direct cooling features evaporator coils in each shelf to cool each compartment directly for maximum uniformity and minimal recovery time - A heated door frame prevents ice from building up around the gasket securing a stable and uniform temperature inside the freezer - The user friendly G214 controller is standard and includes different alarms such as visual, acoustic, open door, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - 100% HCFC & CFC free The Arctiko ULUF 125 -86°C Ultra Low Undercounter Freezer will add a new dimension to your laboratory. The freezer can be used as either a benchtop or undercounter model. The compact space-saving design and low noise level makes it a perfect storage solution for your laboratory. The ULUF -86°C series is produced with the true and original single compressor technology which allows for such a small sized unit. The single compressor technology is specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. Even with the smaller size of the ULUF 125, users can expect very reliable performance from this ultra low freezer. INCLUDED: The Arctiko ULUF 125 -86°C Ultra Low Undercounter Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Labconco RapidVapVacuum EvaporationAdvanced vacuum function Microprocessor controls vacuum at pr (more)eset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900000 RapidVapVacuum Evaporation, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Reax 20/8 Overhead Shaker Introducing the Heidolph Reax 20 Overhead Shaker, a reliable, rob (more)ust solution designed to handle your most demanding sedimenting sample requirements. Boasting a carrying capacity of up to 8 bottles, the Reax 20 is ideal for a wide range of applications including environmental technology, paint processing, and materials industry quality assurance.The Reax 20 stands out with its considerable maximum permissible weight of 30 kg, allowing for the proper mixing of samples with a high solid content. Its impressive load-bearing capability, combined with versatile accommodation for different vessels, makes it an indispensable tool for laboratories and industrial settings alike.Safety has been given top priority with the Reax 20. Due to the powerful forces it can set in motion, this overhead shaker is equipped with an emergency stop switch, ensuring user safety at all times. It's suitable for mixing cylinders or wide-neck bottles, offering versatile usage for a variety of sample types. This device makes attaching bottles easy and fast, providing a seamless, user-friendly experience.Offering a variable speed set by a user-friendly analog control knob, the Reax 20 allows continuous adjustment from 1 to 16 rpm, enabling precise control over your sample processing.Its versatility extends to the range of vessels it can accommodate. With the use of attachments, it can hold other vessels with heights ranging from 160-270mm and a maximum diameter of 136mm.Invest in the Heidolph Reax 20 Overhead Shaker, a resilient, reliable, and adaptable solution for your sample processing and storage needs. Handle your sediment-prone samples with the ease and precision this robust device offers, and achieve outstanding results every time.Click Here to View Product Video INCLUDED: The Heidolph Reax 20/8 Overhead Shaker includes: - Power Cord - Three Year Manufacturer's Warranty