Memmert IPP1060ecoplus Peltier-Cooled Forced Circulation Incubator 1060L, 115V

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2003 Tested at 37°C and -2°C

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-A FALC laboratory incubator

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The Innova CO-170 CO₂ incubator is designed to provide stable and homogeneous atmosphere required fo (more)r cell culture by controlling temperature, carbon dioxide and optionally oxygen for cultivating samples and cells from biological laboratories. The fan-less design offers more usable space and eliminates the fan, reducing contamination. A six-sided direct heating system provides a uniform incubated environment to gently bathe cells, and the deep-drawn, stainless-steel chamber eliminates seams or welds and allows easy cleaning. Temperature range: Ambient +4°C to 50°C Temperature control increments: 0.1°C Temperature stability (at 37°C): ± 0.1°C Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Humidity control (at 37°C): 95% Reservoir capacity: 2.5 Liters Volume: 170 L Dimensions: (WxHxD): 686 x 846 x 701 mm Interior dimensions: (WxHxD): 538 x 691 x 445 mm Weight: 83 kg

Genlab Prime PRI/150 Laboratory Incubator This was removed from a working lab where it was surplus  (more)to requirements The unit powers up and is in full working order. It is in good cosmetic condition with minor marks. 2 Shelves - 49 x 48cm

This RS Biotech Galaxy CO2 Incubator  Model - 170 was removed from a university lab where it wa (more)s surplus to requirements. The unit was tested and recertified by a qualified service engineer. The full report is available on request. It is important to note that the outdoor door has dropped slightly and the hinge is worn. The outer door seal also has a split. It was confirmed to be in full working order and it is in otherwise good cosmetic condition with some minor marks from use.

Accepts a variety of rotors and adaptors. Advantage-Lab Universal Centrifuge is durable and versatil (more)e and features a large control panel for easy viewing. No rotor equipped Description Rotor type recognition: manual input for adjustment before start up. Imbalance sensor with safety shutdown mechanism. Electronic lid locking system prevents opening of lid while in use. Error mention with imbalance or other failure. Manufactured in accordance to IEC 1010 regulations. Corrosion-resistant steel chambers. Highly durable construction provides stability during imbalance. Specifications Capacity 4 x 100 mL Display Digital Type Universal Centrifuge Frequency 50/60 Hz Max. Speed 6,000 rpm Material Stainless Steel Dimensions (L x W x H) Exterior 350 × 470 × 330 mm

Block capacity: 3 x 30 x 0,5 mL tubes Proposed sample volume: 20 – 200 µL Maximum Heating: 4.0°C/s A (more)verage Heating: 3.6°C/s Maximum Cooling: 3.6°C/s Average Cooling: 3.2°C/s Temperature uniformity: ±0,20°C at 55°C after 15 s Standby temperature: Down to 4°C Adjustable temperature range: 3 – 99°C Temperature control accuracy: ±0,1 °C Lid temperature: 30 – 110°C Time increment: 1 – 240s/cycle Temperature increment/decrement: ±0,1°C to 20°C per cycle

Dimensions (HxWxD): 1020 x 300 x 605 mm

*Photo not added of thermometer testing* New Brunswick Scientific Innova U725G Ultra Low-Temperature (more) Freezer Lab U725 -86 This was removed from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested. It is in good working order. It is in good cosmetic condition. Internal dimensions: L61 W87 H136cmIncludes 2 Shelves: 55 x 84cm

Memmert ICH260 Stability Climate Chamber 256L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 256L (9 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH260 Stability Climate Chamber 256L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH260 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH260 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH260 Stability Climate Chamber 256L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The newest line of Radwag Mass Comparators enables adjusting mass standards and weights according to (more) the OIML recommendations (R-111) from 1 mg to 5 kg for E1 class and lower. Mass comparators are used both for ensuring traceability of mass measurements, and verification of weights in accordance with the principles of legal metrology. RADWAG Mass Comparators have gained recognition among Accredited Calibration Laboratories in many countries. Mass comparator WAY 5Y.KO series similarly to other models, comprises two components. One of them holds the electronic module, and the other precise mechanical measuring system. The WAY 5Y.KO series comes standard with an aesthetic, large weighing chamber with glass anti-draft shield. All elements of the weighing chamber are manufactured from glass or metal to minimize the influence of electrostatic charges on weighing result. Mass comparator WAY 5Y.KO series features an intuitive menu supporting a user while operating the instrument.