Memmert IN450plus Natural Convection Incubator 449L, 115V

Sanyo CO2 MCO-175 Incubator This item was removed from a university laboratory where it was surplus  (more)to requirements. It is in fairly good used condition, showing signs of rust around the unit. It includes four shelves and a humidifying pan, with the door catch and seal both in good condition. The unit powers up and is in good working order (thermometer & co2 analyser not included). Specifications. - Model: MCO-175 - Serial No: 20606783

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Possibility to set ramps with module and RS232 port (4 programs of 8 steps)     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-AR FALC laboratory incubator

Memmert IF30plus Forced Circulation Incubator 32L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 32 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 32 L (1.1 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF30plus Forced Circulation Incubator 32L, 115V is a reliable solution for precise temperature control in laboratory environments. With a setting temperature range from +20°C to +80°C and an impressive accuracy of 0.1°C, this incubator ensures consistent and uniform heating for sensitive applications. Its 32L (1.1 cu.ft.) capacity, combined with a reinforced stainless steel interior, provides ample space for diverse sample types while maintaining easy-to-clean surfaces. The advanced ControlCOCKPIT twin display system offers an intuitive interface with dual high-definition TFT-color interfaces, enabling seamless control over critical parameters such as temperature, fan speed, and air flap position. The forced air circulation system, adjustable in 10% steps, ensures optimal airflow and uniform heating. Safety is at the core of the Memmert IF30plus design, featuring AutoSAFETY systems with integrated over- and undertemperature monitors to protect samples and equipment. The incubator is equipped with dual Pt100 sensors for mutual temperature monitoring and performance assurance, while the adjustable overtemperature monitor and mechanical temperature limiter (TB) comply with DIN 12880 standards. Additional features include a sterilization program for the chamber, function SetpointWAIT to ensure the process only begins once the target temperature is reached, and built-in audible and visual alarms to enhance operational safety. The durable stainless steel construction ensures long-term reliability, making this incubator ideal for a wide range of lab applications. INCLUDED: The Memmert IF30plus Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark SureTemp Dual Convection 130L Incubator The new SureTemp Incubator series provides the hig (more)hest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 130L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This listing is for a Shell Lab S16R-HS-2 Shaking Incubator.The unit is in full working condition an (more)d is ready for immediate release.Supplied with CO2 Bottles and Trolley.The Shell Lab S16R-HS-2 Shaking Incubator is expertly crafted for the continuous growth of biological organisms, making it ideal for various research applications. Here’s a rundown of its standout features:Key Features:Generous Capacity: With a 92-liter capacity, the S16R-HS-2 is well-suited for accommodating larger experimental setups, perfect for microbiology and cell culture studies.Standard Voltage Compatibility: Operating on 110/120 volts allows easy integration into most lab environments without the need for special electrical installations.Adjustable Orbit: The incubator offers an adjustable orbit, providing the flexibility to switch between a vigorous 0.5-inch stroke for enhanced mixing and a gentle 1-inch stroke for delicate cultures. This versatility supports various cell types and their specific oxygenation needs.Counter Balance Weighting System: This unique feature ensures smoother operation by adjusting to off-center loads, varying capacities, and stroke lengths, reducing vibration and enhancing stability—especially important for delicate cultures.Precise Temperature Control: Essential for biological growth, the incubator maintains stable temperatures, which can be critical for experiments requiring strict environmental conditions.Compact Footprint: Its small footprint makes it an excellent choice for labs with limited space, allowing for efficient use of available work areas.Static Incubation Capability: Includes shelf space to accommodate static incubation while shaking, providing additional flexibility for experimental setups.Comprehensive Alarm System: Equipped with alarms for temperature, RPM, and timing, users are promptly notified of any deviations, ensuring that conditions remain optimal for growth.Overtemperature Protection: This feature includes a safety thermostat, providing an extra layer of protection to prevent overheating and ensuring reliability during long-term experiments.

Selecta DIGIT-COOL circulation ultrathermostat. Digital. Adjustable temperature from ambient to 100  (more)ºC. Stability ±0.01 °C. Pt100 sensor. Circulation pump 150 mbar. Adjustable flow rate up to 12 l/min. Safety thermostat and fluid level buoy. Selectable maximum and minimum alarm and working temperatures. (HWD): 450*210*510mm; 22 kg. Consumption: 1.4600 W. User manual. The DIGIT-COOL Selecta Circulation Ultrathermostat is high quality equipment designed to precisely control temperature in laboratory applications and industrial processes. With its easy-to-read digital display and intuitive controls, this thermostat ensures precise and stable temperature control, making it ideal for a wide range of applications. This ultrathermostat features efficient internal circulation that ensures uniform heat distribution, resulting in a homogeneous temperature throughout the system. Additionally, its compact and robust design makes it easy to install and operate, making it an excellent choice for laboratories and industrial plants. With a wide range of temperature settings and exceptional accuracy, the DIGIT-COOL Selecta Circulation Ultra Thermostat is a reliable and versatile tool for any work environment requiring precise temperature control. Its advanced technology and exceptional performance make it an ideal choice for applications requiring precise temperature control. The DIGIT-COOL immersion thermostat allows you to regulate the temperature of the liquid from 0ºC to 100ºC with a stability of 0.1ºC. The thermostats are equipped with: - Pt100 resistance thermometer temperature sensor. - Circulation pump with adjustable flow for agitation. - Cooling coil to regulate room temperature by connecting to mains water. - Safety thermostat and fluid level buoy. - Selectable upper and lower alarm temperature. - Selectable maximum and minimum working temperature. - Selectable reading correction. - RS232 connection. - Reading in degrees Fahrenheit or Celsius. Accessory not included with the possibility of supply: stainless steel bucket, lid with canopy or with reducing discs, frame and racks.

Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0° (more)C (at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP1400ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP1400ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP1400ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400ecoplus Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Hermle 8 x 10ml swing out rotor for Z287-A The Hermle 8 x 10ml swing out rotor is a high-capacity ro (more)tor designed for use with the Hermle Z287-A series centrifuge. With a maximum speed of 5,000 RPM and a maximum RCF of 3,717 x g, this rotor can accommodate up to eight 10ml tubes. The swing-out design of the rotor allows for easy loading and unloading of samples, making it a convenient choice for a wide range of applications in molecular biology, cell biology, and biochemistry. With its compatibility with the Hermle Z287-A series centrifuge, this rotor is an excellent choice for any laboratory looking for a reliable and versatile centrifuge rotor that can handle a high sample volume. The rotor's robust design ensures safe and efficient centrifugation of samples, making it a valuable addition to any laboratory setting. INCLUDED: The Hermle 8 x 10ml swing out rotor for Z287-A includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty