Memmert IF750 Forced Circulation Incubator 749L, 115V

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements. (more) The unit powers up and works, but the door mechanism is broken, and the door will not remain closed. It is sold for spares/repairs.

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator All items are in good cosmetic condition wit (more)h minimal wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

This CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System was removed from a univers (more)ity lab where it was surplus to requirements. The lab retained the "phoenix" unit and the image server PC as well as the software. It was reported as otherwise fully working. Included in the system are; 1 x Middle PC Unit:-Model - Minstrel HT PC/Monitor 1 x Model - Minstrel HT CCUHours -573282 1 x Dell Power Connect 2708Dell PC - The unit powers on and has Minstrel & Robot Programs 2 x Model - Gallery 700 IncubatorsBoth the units power up. Everything powers up but the system has not been tested, the incubators need to be connected to the PC unit to be operated. Everything looks to be in good, used cosmetic condition. The manuals are included.

BioSpherix Xvivo System X2 isolated workstation for cell culture work under controlled conditions. M (more)ultiple incubation chambers, with independent O2/CO2/RH programming. The incubation sub-chambers have doors that open into the area for handling with gloves in an aseptic environment controlled by temperature, O2 and CO2. O2 control from 0.1% to 99.9% is possible in each incubator. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. Heatable interior atmosphere and work surface. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. Control of the O2 level also in the SAS or exchange lock for the input/output of material and samples. Software control on a PC for easy documentation and data logging, even allows remote control. Modular and completely enclosed workstation, without requiring the expulsion or extraction of air. Modular system, can be expanded in the future. The BioSpherix X2 closed incubation system is an attractive cleanroom alternative. With the Xvivo System Model X2, good manufacturing practices are easier to achieve, risk is reduced in many ways, and the speed of implementation is much faster and easier. The Xvivo System X2 model, available through its sister company, Biospherix Medical, is designed to process and produce cells in compliance with regulatory GMPs. The BioSpherix Xvivo System Model X2 is the world's only proven modular cytocentric aseptic containment isolator.

Memmert IN750 Natural Convection Incubator 749L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 749 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Large 749 L (26.5 cu.ft.) capacity for versatile applications - High-precision control with 0.1 °C resolution and 1 Pt100 sensor DIN class A - SingleDISPLAY ControlCOCKPIT with adaptive PID-microprocessor controller and high-definition TFT display - SetpointWAIT function ensures process timing starts once set temperature is reached - Inner glass doors with fully insulated stainless steel doors and 2-point compression lock - Easy-to-clean stainless steel interior with reinforced ribbing and integrated heating on all sides The Memmert IN750 Natural Convection Incubator 749L, 115V provides an expansive 749 L (26.5 cu.ft.) chamber, perfect for applications needing precise temperature regulation. Operating from +20°C to +80°C and capable of maintaining settings as low as 5°C above ambient, it features the user-friendly ControlCOCKPIT with SingleDISPLAY and high-definition TFT display for adjusting temperature (Celsius or Fahrenheit), air flap position, and timer. Its fully insulated stainless steel door includes an inner glass pane with a 2-point compression lock for visibility and safety. Natural convection and a pre-heated fresh air admixture ensure consistent chamber conditions, while AtmoCONTROL software enables efficient data management. Built for durability, it accommodates up to 14 shelves with a max load of 661 lbs, making it ideal for demanding lab settings. INCLUDED: The Memmert IN750 Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labsystems Microplate Washer Autowash I Labsystems Cellwash 96 well microplate washer system complet (more)e with vacuum pump and bottles Semi-automatic system Labsystems Cellwash is designed for washing the contents of 96-well plates in a high-throughput manner, reducing the washing time of one plate to a few seconds.

Bio-Rad Model 1327 Econo ( Chart ) Recorder 731-8252 Range Switch : 9 settings The Range Selector se (more)ts the range of full scale deflection from 1 mV to 500 V. Paper Speed : 12 settings Sets paper speed from 1 cm/hr to 60 cm/min

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.