Memmert ICO50 CO2 Incubator 56L, 115V

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Abbott Commander Incubator 8 shelves Type 6210/02

Temperature range: Ambient +5°C to 75°C Temperature uniformity (at 37°C): ±0.6°C Temperature stabili (more)ty (at 37°C): ±0.2°C Chamber material: Stainless Steel Convection technology: Gravity convection Capacity: 194 L Interior dimensions (DxWxH): 589 x 464 x 708 ,m) Dimensions (LxWxH): 738 x 640 x 920 mm Weight: 65 kg Including: 5x Shelf with holders for petri dishes, ø50 mm, stainless steel 2x Shelf perforated, stainless steel 1x Support stand with casters 1x Stacking adapter HTM 180

Benchmark MyTemp 65HC Digital Cooling Incubator The myTemp 65HC Incubator is designed to provide acc (more)urate and uniform temperature control from 0 to 60C. The broad temperature range of the instrument expands the use of this incubator to both heating and cooling applications. A large, digital display allows for visualization of the chamber temperature and the remaining incubation time, while an internal light is included for improved visualization of the chamber. In addition, a built in, internal outlet can be used to provide power to small instruments, such as shakers, rockers, etc. With forced air technology and stainless steel inner construction, uniform heat transfer is ensured throughout the internal chamber. When set for sub-ambient temperatures, the powerful compressor is activated, quickly cooling the chamber to the desired temperature.. With an exterior height of 39 inches (100cm), the incubator is designed to be floor-standing, yet is also compact enough for bench-use. (Not recommended for use on benchtops taller than 32in/81cm). The instrument is supplied with two, adjustable height shelves, while additional shelves can also be purchased separately (item: H2365-SH). INCLUDED: The Benchmark MyTemp 65HC Digital Cooling Incubator includes: - Two Adjustable Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D8B was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is included. It is in good cosmetic condition with some marks from use.

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 2 x Shelves: 47 x 45 cm

Hoefer SUB20C Maxi-Cooled Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 20 x 20 cm Maxim (more)um Power Settings 1000 V, 500 mA, 500 W Maximum Buffer Volume 2.2 L Features - Large format‐20 x 20 cm gel tray is ideal for high resolution techniques - Multichannel pipette compatible combs—with a maximum 40 sample throughput reduce gel loading time - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory - Cooling tray with 20 x 20 cm gel capacity—maintains optimal conditions for high-resolution nucleic acid analysis The Hoefer SUB20C Maxi-Cooled Submarine Gel Electrophoresis Unit combines the high-resolution capacity of the SUB20 with enhanced cooling functionality, making it ideal for extended nucleic acid analysis. This unit is equipped with a spacious 20 x 20 cm gel tray and four comb positions, supporting up to 168 samples, perfect for labs that need both precision and efficiency. Designed to prevent heat buildup during long runs, the SUB20C includes a cooling tray to maintain optimal conditions, reducing the risk of sample degradation. In addition to the standard features—color-coded, height-adjustable combs, multichannel pipette-compatible combs, and buffer recirculation ports for stable pH—the SUB20C offers a UV-transparent running tray for direct imaging, colored loading strips for easy well identification, and side handles for safe transport around the lab. INCLUDED: The Hoefer SUB20C Maxi-Cooled Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly with Cooling Ports - Safety Lid - High Voltage Leads - Running Tray with Casting Gates - 1 mm thick, 16 well combs, 2 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Micropipettes GILSON P20N (2-20 microl). Sand supply CALIBRATED, sterilized and free of RNAsas.

Edwards nXDS20iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS20iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS20iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS20iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement28.0 m3h-1 / 16.5 ft3min-1Peak pumping speed22.0 m3h-1 / 13.0 ft3min-1Ultimate vacuum (total pressure)0.030 mbar / 0.022 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed10Maximum continuous inlet pressure50 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.6 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Branson SFX250 Sonifier w/ 1/2" HornFeatures - 20 kHz ultrasonics for quiet tabletop operation. - Sa (more)mple sizes from 0.2 to 500 mL. - High-efficiency, handheld and stand-mountable converters require no internal cooling. - Scrollable, multifunction screen with pushbuttons. - Continuous or pulsed ultrasonics. - Amplitude control range from 10 to 100%. - Microtip mode limits amplitude to 70% to extend tool life. - Control modes include time, temperature, and energy. - Advanced energy control mode delivers precise energy input in continuous or pulse modes. The fully digital control screen allows the user to quickly and effortlessly select control settings, power level, and sonification duration. The Branson SFX sonifer gives users ultimate control with an amplitute range of 10 to 100% along with continous or pulsed ultrasonics. These smaller, highintensity tips are ideal for processingsmaller samples in Eppendorf vialsor similar vessels. Sizes range from3/32" to 1/4". The SFX250 and SFX550 are part of the new SFX Series of Sonifiers from Branson, designed to bring the industry’s most advanced sample-processing capabilities to your laboratory. The SFX Series brings a new level of ease, precision, and repeatability with advanced energy and temperature control modes, process monitoring capabilities, and programming features. In Energy Mode, the SFX Series power supply manages the processing cycle to deliver a precise, user-determined input of ultrasonic energy (measured in joules), either continuously or pulsed. The SFX Series automatically compensates for any variability, extending or shortening the cycle as needed to deliver the precise energy output. With true temperature control (requires separate temperature probe), the SFX Series power supply maintains the temperature of the sample to within a user-specified range, automatically adjusting the ultrasonic pulse length to regulate the temperature rise and prevent overheating. For assured repeatability and precision on a greater scale, the SFX Series enables users to create and store up to 20 sample-processing programs. Program parameters include continuous or pulsed ultrasonics; time, energy, or temperature control modes; pulse on-time/energy, off-time, and total on-time/energy; or amplitude as a percentage. In operation, Sonifier SFX Series monitors ongoing processes on a scrollable, digital screen, providing continuous updates of key variables including power level, energy usage, sample temperature, and experiment progress. Features:Click Here to View Product Video INCLUDED: The Branson SFX250 Sonifier w/ 1/2" Horn includes: - Converter - 1/2" Horn - Cable - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty