Memmert Double Door Incubator

This listing is for a Sanyo MIR-162 IncubatorTechnical specifications:Voltage: 230 Volt / 115 VoltPo (more)wer: 200W / 200WCurrent: 0.9 A / 1.8 AWeight: 44 kg.Temperature 5 ° C to 35 ° CMaximum relative humidity 80% for temperatures up to 31 ° C decreasing linearly to 50% relative humidity at 40 ° Cspecifications:Effective capacity: 93 litersTemperature controller: K sensor, PID controlTimer: Electronic timer with delayContains NO fan.OutsiDimensions (W) x (D) x (H): 58 x 60 x 82cmInterior dimensions (W) x (D) x (H): 44 x 47 x 44cm

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree; the transparent internal door. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V Temperature Range 5 (more)°C to 60°C Temperature Distribution Accuracy ± 0.5°C Chamber Volume 286L Features - Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration - 44% power savings compared to previous models - Controller upgraded for easier viewing and operability - Temperature distribution accuracy improved for better incubation - Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO2 emission monitor Programmable, eco-friendly 286L refrigerated incubator. Upgraded inverter control improved refrigeration efficiency, reduced frost significantly and minimized wasted power during refrigeration. Controller upgraded for easier viewing and operability. Improved temperature distribution accuracy for better incubation. Standard equipped with program operation, auto-stop, auto-start, quick auto stop, timer, calibration off-set, memory, and electricity & CO₂ emission monitor. Operating temperature range 0~ + 60°C. INCLUDED: The Yamato INE-800-115V Programmable Eco-Friendly Refrigerated Incubator 286L, 115V includes: - 5 x Shelves w/ Brackets - 2 Keys - Silicon Stopper for Cable Hole - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Temperature range: -5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluctuation  (more)(at 40°C): ± 0.1 K Temperature uniformity (at 5°C): ± 0.6 K Temperature uniformity (at 25°C): ± 0.2 K Temperature uniformity (at 40°C): ± 0.3 K Warming up time (to 40°C): 5 min Cooling down time (fromt 40°C to 5°C): 58 min Recovery time after door was opened for 30 sec (at 5°C): 4 min Recovery time after door was opened for 30 sec (at 40°C): 1 min Maximum load: 40 kg Maximum load per shelf: 15 kg Capacity: 53 L Dimensions (WxHxD): 635 x 835 x 580 mm Interior dimensions (WxHxD): 400 x 400 x 330 mm Weight: 72 kg

VortaMix Mini Vortexer green V1000 Argos Technologies New equipment in its original packaging Mini g (more)reen vortex reference V1000G Speed: 3,000 rpm Weight: 0.55 kg Dimensions: 96 x 85 mm Ambient temperature range: 5...40 °C

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 500 g), plastic box Number o (more)f pieces in the set: 12

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Temperature range: -5°C to -25°C Control unit: Gram Control Unit with voltage free contact, alarms a (more)nd offset function Alarms: Acoustic and visual, High/Low temperature alarms and door alarm Access port: 1 pcs. Ø 24.5 mm Defrost system: Automatic smart defrost with re-evaporation of the defrost water Dimensions (WxDxH): 600 x 731 x 2000 mm Net volume: 303 litres Net weight: 112 kg

The DYNEX DSX Automated ELISA System is a proven, fully- automated open system with a unique dispens (more)e synchronization that helps eliminate plate drift and achieve consistent results across four independent plate incubators. This helps to manage testing workload with reduced labor and walkaway capability to maximize lab personnel effciency. System: Reader: