Memmert BE300

Mini Portable Dry Bath Incubator Mix&Match Block Pad3-100c COYOTE New equipment in its original pack (more)aging Delivered without aluminum blocks Reference: Pad3-100c series chilling/heating dry baths accommodate half of the blocks of a H2O3 dry bath.The mini dry bath is very compact and economical,and it plays a role of all-in-one small box combining the functions of ice box,refrigerator,incubator,water bath,circulator,heater and etc.It works like a laptop,and is a perfect device"mate"for reagents. Temperature Range: 0-100ºC Display precision: 0.1ºC Temperature precision: ±0.2ºC Temperatureevenness: ±0.2ºC Average Heating Rate from 25ºC to 95ºC: 10 ºC/min Average Chilling Rate from 25ºC to 4ºC: 4ºC/min Operation ambient temperature: 8-30ºC Power Supply: 12V DC,5A Dimensions: 130×130×85mm Working area dimensions: 54×72 mm Net weight: 0.7kg

Temperature range: 2°C to 15°C Dimensions (HxWxD): 2115 x 700 x 830 mm Internal dimensions (HxWxD):  (more)1570 x 530 x 650 mm

FISHER SCIENTIFIC FISHERBRAND DIEMOS ABV 175/80°C Drying Oven / Incubator with Forced Convection Dry (more)ing cabinet with motor-fan Capacity: 175 litres Vertical type External dimensions: (L) x (D) x (H): 69 x 71 x 103 cm Zinc-plated steel back Temperature range: 10°C above ambient temperature - up to +80°C 2 perforated stainless steel shelves Double doors (internet door and external door) 230 V 50/60 Hz 1000 W Weight: 70 Kg Tested at 37°C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

Agilent Technologies 6890N GC System with 7683B Series Injector & 5973 Mass Selective Detector T (more)his system was removed from a university laboratory where it was surplus to requirements. All components are in working order and in good cosmetic condition. The system was professionally serviced and reported to be in full working order. - The full service report is available on request. Components: - Agilent Technologies 6890N Network GC System - Model: 6890N - Serial No.: CN10521049 - Agilent Technologies 5973 Mass Selective Detector - Model: 5973 - Serial No.: US52040176 - Agilent Technologies 7683B Series Injector - Model: 7683B - Serial No.: CN51132482

Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge The Sprint 8 includes an eight position,  (more)fixed-angle rotor for the centrifugation of 10ml blood tubes (16 x 100mm), and 15ml conical tubes (17 x 120mm). Smaller blood tubes (12 x 75mm and 12 x 100mm) are also compatible with the use of optional adapters (C3100-ADP).With intuitive controls and a large LED display, virtually no programming or setup is required prior to starting a cycle. Simply use the up/down buttons to select the run time and press “START”. The safety lid-lock is engaged and the rotor quickly and smoothly accelerates to 3,400 rpm. Once the run time is completed (or the “STOP” button is pressed) the rotor comes to a complete stop and the lid lock is disengaged for the removal of samples.Ideal for Coag, PPP and urinalysis studies.INCLUDED: The Benchmark C5000-8-PT Sprint 8 Portable Clinical Centrifuge includes: - Portable centrifuge - Leveling kit - Car power adapter - One Year Manufacturer's Warranty

Microtip probes are available in tapered and stepped configurations and are designed to process samp (more)les contained in small diameter vessels at extremely high intensity (refer to chart for recommended volumes). Tapered microtips screw into standard 1/2" step horns with tapped ends. The double stepped microtip consists of a coupler and a stepped tip and screws directly into the converter. It has lower amplitude than the tapered tip, but is capable of reaching into small diameter vessels of greater depth and can process solutions down to 0.1 mL. Typical Applications: - Micro-tapered is recommended for processing spores, fungi, yeast, muscle, and connective tissue. - Double Stepped Microtip –is recommended for red and white blood cells, tissue culture cells, HELA cells, and cells which have a low to medium resistance to breakage. Attaches to converter only. For use with Branson SFX250, SFX550, 250 & 450 Sonifiers .Only attach Microtip to Disruptor horn; attach 2-piece. Double-step Microtip to converter only. Tip Diameter 1/8” (3mm) Intensity Ultra High Ampl. Range 116 - 494 Volume 0.25 – 10ml

Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz Working Temperature Range 20°C to 300°C Heatin (more)g Capacity 3000W Fluid Type Water, Silicone Features - TFT Color Touchscreen - Multilingual - Input for setpoints, warning/safety values and menu functions - ICC (Intelligent Cascade Control), self-optimizing temperature control - ATC3 3-Point-Calibration - Pt100 External sensor connection for measurement and control - Continuously variable pressure/suction pump - Early warning system for low liquid level (DBGM 203 06 059.8) - Adjustable high temperature cut-out, visible via display - RS232/RS485, USB and Ethernet interface for online communication - Integrated programmer - Built-in cooling coil and drain tap The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz with 6L bath tank and lid with 3kW heating power to +300°C. Large, color touchscreen UI with built-in help functions. For internal and external temperature applications. Includes Intelligent Cascade Control, self-optimizing for optimum results with settings for band limit, limit setting, co-speed factor and control dynamics. A variable speed pressure / suction pump provides strong circulation for internal or external applications. A built-in cooling coil enables counter cooling with tap water. Barbed fittings for 8 and 12 mm ID tubing are included (pump connections M16x1 male). Includes Pt100 connection for external monitoring and control, electronically adjustable pressure/suction pump, RS232/RS285, USB and Ethernet ports with optional slot for analog communication (requires module 9900100). Modbus TCP/IP incorporated. Stakei port for external accessory control (solenoid valve, etc.). Class III (FL) according to DIN 12876-1. INCLUDED: The Julabo MAGIO MX-BC6 Heating Circulator, 230V/50-60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

PM Balances by RADWAG – Laboratory Precision Under Industrial Conditions Mono BLOCK® techn (more)ology The ability to weigh loads up to 120 kg on a large weighing pan with high accuracy and good repeatability, minimum eccentricity error over the entire range, quick and stable measurement (achievable within 1 second), parameter stability over time and during transport, weighing pan dimensions adapted to the accuracy of the balance are the distinguishing features of RADWAG PM balances. All of this is possible thanks to the use of a cutting-edge measuring system based on RADWAG’s enhanced MonoBLOCK® technology. The change in the design of the monoblock has made it possible to work with a readability of 0.01 g at a maximum capacity of 20 kg and 0.2 g at a maximum capacity of 120 kg, with a repeatability of 0.01 g, and resistance to changes in ambient conditions. PM balances also include: robust design based on a larger and taller Monoblock, built-in 4-point overload protection system, IP 43 ingress protection, internal adjustment, 5" colour display, easy start-up, intuitive operation, and ergonomics. Application PM balances not only provide an accurate reading and quick measurement, but they are also versatile, allowing them to be used in a variety of industrial sectors. Dosing, formulation-making, and parts counting are just some of the possible applications of these multi-purpose devices. PM balances will find use wherever high-accuracy, high-load-capacity weighing equipment is required. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.