Liconic Instruments STX44-HRSA Incubators for Robotic Integration

Oaken Commercial Incubator & Hatcher This item was removed from a university lab where it was su (more)rplus to requirements. The incubator powers on, with the internal light and fan in working order. The unit is in reasonable cosmetic condition and in working order (thermometer not included). Includes:- 12 x Egg Trays (Dimensions: 50 x 36 cm, each holding up to 88 eggs)

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 2 x Shelves: 47 x 45 cm

Memmert IN75plus Natural Convection Incubator 74L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - Setting temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Internal volume of 74 L (2.6 cu.ft.) with a maximum chamber load of 264 lbs (120 kg) - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Natural convection system and admixture of pre-heated fresh air by electronically adjustable air flap - Includes AtmoCONTROL software for data logging via Ethernet interface, USB stick available as an accessory - Temperature control features adjustable overtemperature monitor and mechanical temperature limiter according to DIN 12880 - Comes with two stainless steel grids, fully insulated stainless steel door, and an inner glass door - Stainless steel interior, reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IN75plus Natural Convection Incubator 74L, 115V offers advanced temperature control and versatility for various laboratory applications. With a setting temperature range from +20 to +80°C and a working temperature range starting 5°C above ambient, it ensures precise incubation conditions. The TwinDISPLAY ControlCOCKPIT allows for easy adjustment of essential parameters like temperature, air flap position, and timer, while two Pt100 sensors ensure accurate temperature monitoring and mutual functionality in case of sensor failure. The natural convection system guarantees uniform temperature distribution, ideal for sensitive samples, and the adjustable pre-heated fresh air admixture helps maintain optimal air quality within the chamber. This incubator also features a durable stainless steel interior with a capacity of 74 liters, reinforced by deep drawn ribbing and integrated large-area heating for even thermal regulation. The fully insulated stainless steel door with an inner glass door provides safety and visibility. With AtmoCONTROL software, users can conveniently manage data logging and programming through USB or Ethernet. The IN75plus is built for high-performance with a maximum chamber load of 264 lbs and can accommodate up to six shelves, making it a robust, reliable choice for professional laboratory environments. INCLUDED: TheMemmert IN75plus Natural Convection Incubator 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA INC 125 FC Digital Cooled Incubator Temp. Range -5°C to 100°C Temp. Uniformity ±0.3 K Chamber Vo (more)lume 125 l Features - Precise Temperature Control: Wide range from -5 °C to 100 °C. - Uses natural refrigerant R290. - 125 liters, with space for up to six grid shelves. - Decontamination mode, easy-to-clean surfaces, and defrosting function. - Excellent stability and uniformity, adjustable fan, and superior insulation. - Large LCD display, timer functions, and intuitive controls. - Stackable units, optional door locks, and various shelves. The IKA INC 125 FC Digital Cooled Incubator is an ideal solution for microbiological applications, offering precise temperature control from -5 to 100 °C. It features powerful compressor cooling technology and uses the environmentally friendly refrigerant R290. With a capacity of 125 liters, it can accommodate up to six grid shelves, providing ample space for various applications. The incubator ensures hygienic working conditions with a decontamination mode at 100 °C, easy-to-clean interior surfaces, and a defrosting function. Optimal temperature control is achieved through excellent stability and uniformity, an electronically adjustable fan, and superior insulation. Simple and intuitive operation is facilitated by a large LCD display, timer functions, and a temperature-controlled timer. The incubator also offers versatile accessories and services, including stackable units, optional door locks, and available installation and operation qualifications.INCLUDED: The IKA INC 125 FC Digital Cooled Incubator includes: - INC 125 FC digital Incubator cooled - IO T 2.10 Wire grid tray, chrome plated (2 pcs.) - Tilt protection / assembly material (2 pcs.) - USB A-B cable - Calibration certificate at 37 °C & 10 °C - Hose adapter (for hoses Ø 9-11 mm) - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

Boekel Scientific 151140 Digital Forced Air Incubator, 1.4 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 1.4 cu. ft. (40L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Internal auxiliary outlet provides power for one accessory to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty

This listing is for a Brand New Harvest Right Large Home PRO Freeze Dryer sold through ULMfreezedrye (more)rs.comWe are stock holders in UKPrice before VAT - £4,500A home Pro freeze dryer from Harvest Right allows you to preserve the food your family loves to eat. Freeze drying locks in both flavour and nutrition and can last for years, making freeze-dried food even better than fresh! A home freeze dryer is perfect for any lifestyle.What’s IncludedLarge Freeze DryerPremier Industrial Vacuum Pump (approx. £1600 value)Vacuum Pump OilOil FilterStainless Steel Trays (set of 6)Guide to Freeze DryingMylar Bags (50 ct)Oxygen Absorbers (50 ct)Impulse Sealer FeaturesTray space: 1,107 square inchesFreeze dry 8 to 12.2KG. fresh food per batchFreeze dry up to 2267KG. fresh food per year (This would require a person to use the freeze dryer 4 times a week for 50 weeks a year) DimensionsFreeze dryer exterior dimensions: 541mm W x 698.5mm D x 795mm HPerfect for counter top, cart, or table. Weight of freeze dryer: 64.8KG 10 CFM industrial vacuum pump included/no extra cost (approx. £1600 value) PowerStandard UK 230v  Shipping InfoThe large freeze dryer ships in one package with a total weight of 172KG.Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA)One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts MaintenanceReplace vacuum pump oil every 20 to 30 batches (takes about two minutes)Clean freeze dryer as needed. Warranty1 Year international warranty provided by Harvest Right.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Diameter: 75 mm Suction nozzle diameter: 380 mm Extraction arm length: 1550 mm Including connector

Capacity: 3100 g Readability: 0.01 g Repeatability: 0.01 g Linearity: ± 0.02 g Pan size: ø 180 mm Di (more)mensions (WxDxH): 245 x 321 x 89 mm Weight: 3.6 kg

Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V Operating Temperature Range +10-220°C Operatin (more)g Pressure Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Meet the SDP Series Vacuum Oven, an indispensable addition to your laboratory toolkit. Available in both SDP300 and SDP310 models, this versatile oven offers precise control and dependable performance. With an operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, it's suitable for a wide range of applications. The EZ-ZONE Watlow controls ensure ease of use, while the KF25 access port allows for convenient access. Experience exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.1°C at 80°C, ± 0.20°C at 150°C, and ± 0.3°C at 220°C. Heat up times are impressively fast, and cool down times are efficient. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior boasts 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W304 x D508 x H304 mm provide ample room for your samples. With a total internal capacity of 47.2L and three sturdy shelves, each capable of holding up to 15.8 kg, this oven is well-suited for various applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 10A or AC220 - 240 5.5A) and is a reliable workhorse for your lab, weighing in at ~83kg. It comes complete with three shelves, a power cord, and four leveling feet, making it a versatile and essential tool for your laboratory needs.INCLUDED: The Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V includes: - 3 Shelves (2 tall, 1 short bottom) - 4 Leveling Feet - Power Cord - One Year Manufacturer's Warranty

Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes Speed Range (more) 200 to 18,000 RPM (4,500 RPM with included rotor) Maximum Capacity 4 x 200ml Warranty 5 Year Manufacturer's Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Optimized airflow system keeps the samples cool (Z327) - Stainless steel chamber The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes is a high-performance centrifuge capable of speeds ranging from 200 to 18,000 RPM (4,500 RPM with the included rotor), with a maximum RCF of 23,542 x g (3,350 x g with the included rotor). With a maximum capacity of 4 x 200ml, this centrifuge is ideal for a variety of applications in the life sciences, including tissue culture and molecular biology. Its timer allows for up to 99 hours and 59 minutes of operation, with the option for continuous use. The Hermle Z327 also has the ability to store up to 99 programs, making it highly customizable for specific experimental protocols. Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327 Centrifuge Blood Tube Bundle w/ Swing Out Rotor for 1.8-7ml and 8-10ml Tubes includes: - Z327 Centrifuge - Z327-200 4 x 200ml Swing Out Rotor and 4 x Z327-200-BUK Buckets - 2 x Z327-200-A57 8 x 1.8-7ml Blood Tube Inserts for Z327-200-BUK - 2 x Z327-200-A10 7 x 10/15ml Round Inserts for Z327-200-BUK - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty