Laboratory incubator Smart CLW 180 POL-EKO

BINDER BD-115 incubator / oven with natural convection 100°C Model: BD115 Capacity: 115 liters Tempe (more)rature range: Room temperature plus 5 °C to 100 °C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C

The STX44-HRSA is designed for integration where the instrument is located on the floor. The STX44-H (more)RSA incubators have their handling and climate controls on the lower part of the instrument. The robotic access Gate is located in the upper part of the housing. The SA configuration does not require table space and an SA configured StoreX can easily be put in position without the need of placing the unit on a table. Application: Humid MultiRange Temperature Range: 4 – 50/70°C (depending on humidity) Temperature Stability: ± 0.3°C Relative Humidity: 90 – 95% Communication: RS232 V24, 9600 Baud, ASCII Dimensions (WxDxH): 485 x 514 x 1230 mm Transfer height: 1000 mm Plate capacity: Microtiter 44, Deep well 18, Nanoliter 84

Binder KB 115 Lab Cooling Incubator This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in reasonably good cosmetic condition but has marks from age and use. Includes 4 shelves.

Binder CB-S 170 CO2 Incubator Double Stack Lab This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.)cu.ft.) Features - 256 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V offers a substantial 256-liter capacity, making it ideal for laboratories that require precise temperature control for larger sample volumes. With a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, this incubator ensures consistent, reliable results across a variety of applications. The energy-efficient Peltier heating and cooling system, along with the ControlCOCKPIT digital PID-microprocessor controller and high-definition TFT-color display, allows for intuitive control and easy monitoring. The SetpointWAIT function ensures the process begins only when the target temperature is reached, enhancing accuracy and performance. This incubator is also environmentally friendly, featuring a refrigerant-free design that maximizes energy efficiency. The durable stainless steel interior and textured stainless steel exterior are corrosion-resistant, ensuring long-term durability in demanding lab environments. With the capacity to hold up to nine shelves and a maximum chamber load of 661 lbs, the IPP260eco is versatile enough to handle a wide range of samples. Safety is paramount, with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and autodiagnostic system for fault analysis, providing peace of mind during operation. This incubator delivers superior performance with a focus on sustainability and reliability. INCLUDED: The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN450 Natural Convection Incubator 449L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 449 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Spacious 449 L (15.9 cu.ft.) capacity, suitable for a wide range of applications - ControlCOCKPIT with SingleDISPLAY, adaptive PID-microprocessor controller and high-definition TFT-color display - Inner glass doors with fully insulated stainless steel exterior doors and 2-point compression locking system - Adjustable settings for temperature (Celsius or Fahrenheit), air flap position, and timer, with calibration for three user-selected temperature values - Natural convection system with pre-heated fresh air admixture through electronically adjustable air flap - Comprehensive AtmoCONTROL software for data logging, available via Ethernet or USB - Maximum chamber load of 661 lbs, with eight shelf positions and a 66 lbs load capacity per shelf The Memmert IN450 Natural Convection Incubator 449L, 115V offers a generous 449 L (15.9 cu.ft.) chamber, ideal for a variety of applications requiring consistent temperature control. With a temperature range from +20°C to +80°C, it can maintain precise settings as low as 5°C above ambient. The ControlCOCKPIT with SingleDISPLAY provides adaptive control via a high-definition TFT display, allowing easy adjustments in temperature (Celsius or Fahrenheit), air flap position, and timer settings. Featuring an inner glass door within a fully insulated stainless steel exterior with a 2-point compression locking system, the incubator combines visibility with security. The natural convection system and pre-heated fresh air admixture ensure uniform chamber conditions, while AtmoCONTROL software enables efficient data logging and management. With a sturdy design supporting up to eight shelves, a max load of 661 lbs, and advanced safety features, this incubator meets the rigorous demands of laboratory environments. INCLUDED: The Memmert IN450 Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: -5°C to -35°C Net Content: 432 L (gros content: 600 liter) Dimensions (WxDxH): 83 (more)7 x 756 x 2273 mm Weight: 152 kg Explosion proof Possible options can be ordered at extra cost (see image)

Heto Maxi Dry Plus System With Vacuum Centrifuge + Drywinner Freeze Dryer This was removed from a un (more)iversity lab where it was surplus to requirements. The system powers up and is in good working order. It is in reasonably good cosmetic condition with marks from use. Max RPM-1800 Includes 2x rotors/tube holders. One holds 4-5ml tubes and the other 12-15ml tubes. Centrifuge model number- VR maxi-1Centrifuge serial number- 804040235 Freeze dryer model number- CT/DW 110Freeze dryer serial number- 804050097 Maxi dry model number- MAXI-DRY PLUSMaxi dry serial number- 804060037

VACUUBRAND MD 1 Diaphragm Pump Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping Speed 0.82 CFM a (more)t 60Hz Number of Heads/Stages 4/3 Features - Contamination-free pumping and evacuation - High flow rate even near ultimate vacuum - Excellent ultimate vacuum - Whisper quiet and ultra-low vibration - Proven long diaphragm life, maintenance-free drive system The MD 1 diaphragm pump is an excellent choice for oil-free evacuation and pumping of non-corrosive gases down to 1.5 mbar ultimate vacuum. The three-stage design with precisely guided flat diaphragms provides outstanding pumping speed even close to the ultimate vacuum, especially when compared with similarly rated two-stage diaphragm pumps. The MD 1 is an ultra-low vibration pump with very long diaphragm lilfetime and stable ultimate vacuum documented with years of testing. With a flow path consisting of aluminum and selected plastics (diaphragms and valves made of PTFE/FKM and FKM, respectively) the pumps are suitable for a wide range of applications with non-corrosive gases. The MD 1 is an excellent choice for continuous, oil-free evacuation and pumping of non-aggressive gases. It is suitable for high vacuum requirements at modest gas flow as often needed in physics and analytics. The pump is exceptionally quiet and reliable with long diaphragm and valve lifetimes. With its low ultimate vacuum and compact dimensions the MD 1 is widely used as replacement of rotary vane pumps. Typical applications are exhaust gas analysis, for degassing of small amounts of viscous media and in particular as backing pump for compact turbomolecular drag pumps. Back diffusion of oil or even oil back flow, e.g., into a high vacuum chamber is excluded due to its oil-free operation. For equipment manufacturers customized versions are available.INCLUDED: The VACUUBRAND MD 1 Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark TC 9639 Thermal Cycler w/ Multi-Format Block Benchmark’s TC9639 Thermal Cycler provides co (more)nsistent, reliable results for laboratories with medium to high throughput. From its large, touch-screen user interface to its unique, multi-format block, this cycler is loaded with features. The program wizard and 10 preinstalled programs make it easier than ever to get up and running. A large, full color touch screen serves as the operations center where all functions are accessed. From the “Home” screen, simply touch an icon to view the last run program, enter the program library, or use the program wizard to quickly enter a protocol. In addition, icons for favorite programs can be added for faster access. The program wizard guides users through quickly setting up a protocol in a single screen. Once entered, programs are shown graphically, and can be edited by simply touching the step that requires modification. Time and temperature increments can be built into programs as well as slower ramp rates. Storage capabilities are unlimited; programs can be stored in public folders, private (password protected) folders or on a flash drive. The full virtual keyboard allows for alphanumeric naming of programs and folders. The fully adjustable heated lid prevents condensation and evaporation of samples. Lid temperature can be programmed, and when the block temperature is below 35C, the lid automatically shuts off. Heating and cooling of the block are precisely and accurately controlled within exceptionally tight tolerances by a proprietary algorithm that simulates sample temperature. With the multi-format block, there is no need for the expense of multiple interchangeable blocks. The TC 9639 has the flexibility to accept 96 x 0.2ml tubes, a 96 well plate or 39 x 0.5ml tubes all in the same sample block. An in-situ adapter is available for use with slides. Additionally, the unit may be purchased with a 384 well sample block. INCLUDED: The Benchmark TC 9639 Thermal Cycler w/ Multi-Format Block includes: - Multi-Format Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty