Laboratory incubator Smart CLN 115 POL-EKO

Including Three-Tier Cell Roller Base Capacity : 821.2L Cabinet Material: Cold-rolled steel, powder- (more)coated cabinet Shelves: 6 supplied  (19 max.) Temperature ramp and soak, up to 24 steps Temperature Range: 0° to 60°C Temperature Resolution: 0.1°C Temperature Uniformity: ±0.3 at 25° to 37°C Temperature Sensor: RTD Temperature Accuracy: ±0.1 at 25° to 37°C Compressor: 1/4hp, air-cooled Relative humidity control via steam generator from above ambient to 95% at 37°C Heat Output: 1750W (6000 BTU/hr.) at 220V Adjustable defrost timer; factory set for two 15-min. defrost cycles/24 hr. Refrigerant: CFC-free, R134A Certifications/Compliance: ICH, FDA, TAPPI, ASTM™ Dimensions (d x w x h): 782mm x 1011mm x 2034mm Dimensions Internal (d x w x h): 686mm x 787mm x 1524mm 220V / 50Hz Three-Tier Cell Roller Base (15 positions) Dimensions (d x w x h): 620mm x 757mm x 706mm 220-240V / 50-60Hz

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

Memmert IF55plus Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above a (more)mbient up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 53 L (1.9 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF55plus Forced Circulation Incubator 53L, 115V provides precise temperature control with a working temperature range from Min. 10°C above ambient up to +80°C and 0.1°C accuracy, ensuring reliable performance for various lab applications. Its 53 L (1.1 cu.ft.) stainless steel interior is easy to clean and reinforced for durability, while the TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT-color displays offers clear and intuitive control. The incubator features forced air circulation, adjustable in 10% steps, and pre-heated fresh air admixture to maintain uniform temperature throughout the chamber. Safety is prioritized with the inclusion of AutoSAFETY, which integrates over- and undertemperature monitoring, along with a mechanical temperature limiter (TB) for added protection. The Function SetpointWAIT ensures processes only begin once the set temperature is reached, enhancing experimental accuracy. Other key features include a fixed sterilization program for the chamber, autodiagnostic system for fault detection, and a fully insulated stainless steel door with 2-point locking, making it a dependable choice for sensitive laboratory processes. INCLUDED: The Memmert IF55plus Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN450 Natural Convection Incubator 449L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 449 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Spacious 449 L (15.9 cu.ft.) capacity, suitable for a wide range of applications - ControlCOCKPIT with SingleDISPLAY, adaptive PID-microprocessor controller and high-definition TFT-color display - Inner glass doors with fully insulated stainless steel exterior doors and 2-point compression locking system - Adjustable settings for temperature (Celsius or Fahrenheit), air flap position, and timer, with calibration for three user-selected temperature values - Natural convection system with pre-heated fresh air admixture through electronically adjustable air flap - Comprehensive AtmoCONTROL software for data logging, available via Ethernet or USB - Maximum chamber load of 661 lbs, with eight shelf positions and a 66 lbs load capacity per shelf The Memmert IN450 Natural Convection Incubator 449L, 115V offers a generous 449 L (15.9 cu.ft.) chamber, ideal for a variety of applications requiring consistent temperature control. With a temperature range from +20°C to +80°C, it can maintain precise settings as low as 5°C above ambient. The ControlCOCKPIT with SingleDISPLAY provides adaptive control via a high-definition TFT display, allowing easy adjustments in temperature (Celsius or Fahrenheit), air flap position, and timer settings. Featuring an inner glass door within a fully insulated stainless steel exterior with a 2-point compression locking system, the incubator combines visibility with security. The natural convection system and pre-heated fresh air admixture ensure uniform chamber conditions, while AtmoCONTROL software enables efficient data logging and management. With a sturdy design supporting up to eight shelves, a max load of 661 lbs, and advanced safety features, this incubator meets the rigorous demands of laboratory environments. INCLUDED: The Memmert IN450 Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA KS 3000i Incubator Shaker Type of Movement Orbital Temperature Setting Range Room Temp. +5° - 80 (more) °C Speed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order separately This innovative incubator shaker enables unattended operation in a precisely controlled environment, featuring orbital movement with a 20 mm shaking stroke and a maximum permissible shaking weight of 7.5 kg. It offers a speed range of 10 to 500 rpm, displayed on an LED screen, and controlled in 1 RPM steps. The unit includes a 7-segment LED timer, adjustable from 1 second to 59940 minutes, and operates in both timer and continuous modes. With a heating range from room temperature +5°C to 80°C and a 50-liter inner chamber, this shaker ensures precise temperature control and stability, ideal for various laboratory applications.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: PFI Systems Model: Fumigation Boiler / Bath Key Facts: - Max Volume 250ml- 230V 50/60H (more)z Items delivered: - Fumigation Boiler The fumigation boiler is in good cosmetic condition and 100% functional tested.

Max speed: 6000 rpm Max RCF: 2000 x g Max capacity: 6 x 1.5/2ml Dimensions: (WxHxD): 153 x 128 x 109 (more) mm Weight: 730g

Agilent 6890 Series Plus GC (G1530A) Gas Chromatograph This item was removed from a university labor (more)atory where it was surplus to requirements. The item is in reasonably good cosmetic condition, with visible chemical reactions to the plastic on the top covers.It powered on and successfully conducted self-tests for ROM, RAM, signal path, and detectors. However, two error messages were displayed during operation:- Pneu Error 0158 - PCB Cmd Error 2003 "The pneumatics board, under the EPC modules, requires replacement." Due to the presence of both error codes, this item is listed as Spares/Repair. Specifications:- Model: 6890 Series Plus GC (G1530A) - Serial No.: US00036800 Please note - The screen displays a clear and steady image, though photos may appear distorted due to refresh rate.

C32 series is an advanced but at the same time an easy-to-use weighing instrument that can be operat (more)ed in various industry areas. To ensure precision, speed and excellent measurement repeatability, high quality electronic components are used. Software Integrated battery and wireless data transmission enable portable operation. Complex software allows carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. C32 series devices feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution assure easy and clear transmission of data on current process. Colour bar graph signals whether the weighing result is within declared thresholds thus significantly influencing performance. C32 weighing instruments cooperate with RLAB software for collecting, presenting and carrying out statistical analysis of measurements sent by the weighing equipment. The software enables advanced functions for generating and customizing graphs and reports. Programmable keypad Complex 22-key keypad features programmable function keys which enable its customization. Integrated infrared sensors facilitate activation of basic functions without use of a keypad, this will be appreciated by the owners of high precision instruments. Cooperation C32 weighing instruments cooperate with barcode scanners and printers, this feature is especially important for those operators who use the instruments for parts counting or any tasks requiring clear-cut identification of measured products. Communication Wide range of communication interfaces ensures easy integration of C32 instruments with external master IT systems and trouble-free data exchange. Integrated inputs/outputs available in the basic version of the weighing instrument enable cooperation with external devices, i.e. control buttons, light signalling towers, buzzers and any other controlling/signalling devices. They also provide the ability to control uncomplicated dosing processes. Database Various permissions levels assure safety of stored data and prevent unauthorized operators from modifying the settings. Complex databases of products, packaging and customers are very important for operators working with wide range of products and having an extensive sales network. Broad range of maximum capacities and readabilities guarantees selecting the right model for a particular application.