Lab Incubator ICT 240 FALC

VELP FOC 250I Refrigerated Thermostat Incubator / Drying Oven Total volume: 225 litres FOC225I Usefu (more)l internal volume: 196 litres Temperature range: 3.0 to 50.0 ° C Internal temperature indicated by a display Temperature resolution: 0.1 ° C Electronic thermoregulation system: AUTO-TUNING 2 internal electrical outlets Number of shelves included: 4 Power: 350W Weight: 40 kg Dimension (WxHxD): 540x1300x560mm (21.6x23.2x23in) With internal glass port Continuous ventilation and the Auto-Tuning thermoregulation system ensure temperature uniformity throughout the chamber. The temperature can be set from 3 to 50 °C, the reading on the display refers to the actual internal temperature. The FOC 225I is equipped with two internal sockets controlled by an external switch

This Grant-Bio PHMP Microplate Thermoshaker was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and was tested with a digital thermometer (not included). The power supply is included. It is in good cosmetic condition, with some very minor marks from use.

Heraeus BB 16 Function Line CO2 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks.

This item has just arrived in our stock. Please enquire for further details.

Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V Setting Temperature Range Ambie (more)nt 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 53 L (1.9 cu.ft.) Features - 53 L volume capacity for flexible storage and temperature control - Setting temperature range from 0°C to +70°C with 0.1°C accuracy - Energy-saving Peltier heating/cooling system integrated in the rear - ControlCOCKPIT with adaptive multifunctional PID-microprocessor controller and high-definition TFT-color display - Process time starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration values for precise control - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel exterior The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V offers precise temperature control with an energy-efficient Peltier heating and cooling system. Designed for laboratory environments, this incubator features a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, ensuring consistent results across a variety of applications. The ControlCOCKPIT adaptive multifunctional PID-microprocessor controller with a high-definition TFT-color display provides intuitive control, while the SetpointWAIT function ensures that processes only begin once the desired temperature is reached. Built with a 53-liter stainless steel interior, this incubator is both robust and easy to clean, making it ideal for long-term use. It supports up to four shelves with a maximum chamber load of 176 lbs, providing ample space for different sample sizes. Safety is a priority with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and an autodiagnostic system for fault analysis. With its durable textured stainless steel exterior, the IPP55 is built to withstand the rigors of daily laboratory use while maintaining high performance and reliability. INCLUDED: The Memmert IPP55 Peltier-Cooled Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Boekel Scientific 133001 Incubator, Digital, 0.8cf capacity, solid door w/lock, 115V Incubator with  (more)a locking door for warming contrast media. Ideal for hospital and lab settings where security is required. Includes two shelves and accommodates up to four. The Boekel Scientific 133001 Incubator, Digital, 0.8cf capacity, solid door w/lock, 115V is discounted, brand-new, .Click Here to View Product Video INCLUDED: The Boekel Scientific 133001 Incubator, Digital, 0.8cf capacity, solid door w/lock, 115V includes: - Two Adjustable Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Millipore Milliflex PLUS Pump MXP PUMP 03 Model : MXP PLUS 03 With 3 Microwire Adapter 3 Filtration (more)s Pumps (Milliflex Plus) 3 x 24W

AZURA preparative HPLC pump P 2.1L covers wide flow rate range and pressure capabilities. It has bee (more)n designed for purification of mg and gram samples. The Mobile Control allows intuitive control in stand-alone operation. The integrated automatic recognition of the pump head with RFID technology allows fast adaptions of the pump for various applications. Preparative pump offers wide range of flow rates (0.1-1000 ml/min) Choice of different LC software platforms Improved electronic drive compensation Integrated compressibility compensation Integrated leak management Constant pressure operation mode Solvent delivery Pump type: Preparative HPLC pump Delivery system: double piston pump with Al²O³ pistons Pump head: 250 ml/min Pump head materials: titanium Pressure sensor materials: PEEK (Polyether ether ketone) Maximum delivery pressure: 22.5 MPa (225 bar, 3260 psi) up to 100 ml/min, 20 MPa (200 bar, 2900 psi) at 250 ml/min Flow rate range: 0.1-250 ml/min, 0.5-200 ml/min (recommended) Flow rate increment: 0.01 ml/min Flow rate accuracy: ± 2 %, measured at 5 – 50 % of flow range using ethanol/water 10:90 Flow rate precision: < 0.2 % RSD Gradient support: isocratic, upgradeable to a binary HPG system with additionalpump P 2.1L or to a binary orternary LPG system HPG: gradient accuracy: ± 2 % (5 – 95 %, measured at 5 – 50 % of flow range, water/caffeine tracer) HPG: gradient precision: 1 % RSD, based on retention time at constant room temperature LPG: gradient accuracy:  ± 3 % (5 – 95 %, measured at 5 – 50 % of the flow range, water/caffeine tracer) LPG: gradient precision: 2 % RSD, based on retention time at constant room System protection: soft start, Pmin and Pmax are programmable Wetted materials: titanium,stainless steel, graphite fiber reinforced PTFE, FKM, PEEK, sapphire, aluminum oxide (Al²O³) Ambient conditions: temperature range: 10–40 °C; 50–104 °F, air humidity: below 90 % humidity (non condensing) Leak sensor: Yes Communication Control: LAN; RS-232; analog and event controlled Analog inputs: 0-10 V Analog control input: flow rate Level/event outputs: 8 event outputs (TTL, OC, relays) Programming: 19 programs + 9 links (to programs) + 1 wake up program Special features: system pump head is detected automatically using radio frequency identification (RFID) General Power supply: voltage range: 100 – 240 V, 50 – 60 Hz Dimensions: 361 x 208.2 x 523 mm (W x H x D) Weight: 19 kg

Thermo Scientific TX-1000 Swinging Bucket Rotor This item was removed from a university lab where it (more) was surplus to requirements. It is in excellent cosmetic condition. No buckets are included with this rotor. Specifications:- Max RPM: 4200 - Model: TX-1000 - Item Number: 75003017 No further testing has been conducted.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

The WLC.X7 series represents a new advanced level for precision balances. The X7 series balances fea (more)ture the latest generation capacitive display providing the maximum comfort of use, available right at your fingertips. Ease of operation, clear menu and practical arrangement of the display guarantee the best ergonomics for your everyday tasks. A wide array of available interfaces facilitate selection of the most optimal means for communication. Weighing Data Management The X7 series balances offer unlimited possibilities for cooperation with external devices, providing printing, copying, archiving and data transfer. Built-in IR sensors allow numerous operations (e.g. tarring, transmitting the result to a printer or selecting successive steps of a particular process, etc.) to be performed handsfree, by simply moving a hand across the sensor. The housing is made of plastic, and the pan is made of stainless steel. USB interface facilitates quick transfer and copying of any results of your work (measurements, reports, databases) to other balances. Network management of the weighing data increases effectivity, productivity and safety of the important data to the maximum. WLC.X7 scales are equipped with many communication interfaces: 2 x RS 232, USB type A, USB type B and Wireless Connection. Databases in X7 series balances In new WLC.X7 series balances the information system is based on 7 databases which allow several users to work with database storing several products. The registered weighing results can be subject to further analysis. The data is registered in 7 databases: Users (up to 100 users), Products (up to 5 000 products), Weighments (up to 50 000 weighments), Packaging (up to 100 packaging types), Formulas (up to 100 formulas), Clients (up to 1000 clients), ALIBI memory (up to 512 000 weighments). The X7 series features option of making reports on formulas (up to 500 reports). Personalization taken to the next level The X7 is the only balance available on the market that provides a user with the option to design display using wide selection of widgets. Customised display of X7 series offers direct access to the results of your work and other important information directly from the home screen. ALIBI Memory The X7 series balances feature ALIBI memory that is a warranty for safety and automatic recording of your measurements. Options such as data preview, copying and archiving are available to users as well. The ALIBI memory allows to record up to 500 000 weighment records. Under-Pan Weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.