IKA KS 3000i Incubator Shaker

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212218External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm Bottom:-Model - MCO-20AICSN - 01212221External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V Temperature Range Ambi (more)ent +5°C to 80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 318L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 318L natural convection incubator with communication port. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-803CR General Purpose Incubator with Communication Port 318L, 115V includes: - 4 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Innova CO-170 CO₂ incubator is designed to provide stable and homogeneous atmosphere required fo (more)r cell culture by controlling temperature, carbon dioxide and optionally oxygen for cultivating samples and cells from biological laboratories. The fan-less design offers more usable space and eliminates the fan, reducing contamination. A six-sided direct heating system provides a uniform incubated environment to gently bathe cells, and the deep-drawn, stainless-steel chamber eliminates seams or welds and allows easy cleaning. Temperature range: Ambient +4°C to 50°C Temperature control increments: 0.1°C Temperature stability (at 37°C): ± 0.1°C Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Humidity control (at 37°C): 95% Reservoir capacity: 2.5 Liters Volume: 170 L Dimensions: (WxHxD): 686 x 846 x 701 mm Interior dimensions: (WxHxD): 538 x 691 x 445 mm Weight: 83 kg

Boekel Scientific 151050 Digital Forced Air Incubator, 0.5 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 0.5 cu. ft. (14L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 50°C Relative humidity: <90% at 37°C Humidity source: Water pan M (more)aterial: Stainless Steel Chamber material: Polished stainless steel Capacity: 184 L Interior dimensions (DxWxH): 508 x 541 x 681 mm Dimensions (LxWxH): 635 x 668 x 1003 mm Weight: 118 kg CO₂ module is defective and incubator is retrofitted to a normal incubator.

Lot of Thermo Scientific Rotor Bucket Adapters &amp; Lids All items look to be new and unused, but a (more) lot of the packaging has been opened so we cannot confirm this. We removed the packaging for the photos. Included are the following: Thermo Scientific TX-750 Round Bucket Adapters x 2Part#: 75003638 Thermo Scientific Adapters for T-25 Nunc Easy Flask x 2Part#: 75008384 Thermo Scientific Adapters for T-75 Nunc Easy Flask x 2Part#: 75008383 Thermo Scientific Centrifuge Rotor Bucket Adapters 21x15mL x 4Part#: 75003719 Thermo Scientific TX-750 Swinging Bucket Rotor Lid x 2Part#: 75003609 Thermo Scientific Carriers for microplates and T-75 Flasks&nbsp;for TX-750 rotor x 4Part#: 75003617

VACUUBRAND VACUU-LAN Mini-Network Features - Three VACUU·LAN® ports in a snap - Space saving assembl (more)y for the attachment to the wall or your lab frame - Connect the vacuum pump with vacuum tubing and you are ready to go! - Easy to upgrade to other manual or electronic VACUU·LAN® ports at any time - Higher flow-rate pumps can support two VACUU·LAN® Mini-Networks at once VACUU·LAN® Mini-Network with three modules VCL01 fully assembled The VACUU·LAN® Mini-Network is a plug and play, three-fold vacuum network that can be attached to a wall or lab frame. Use vacuum tubing to connect the Mini-Network to a new VACUUBRAND diaphragm vacuum pump, or any existing diaphragm vacuum pump to support three applications simultaneously. Specialized VACUU·LAN®ports minimize interference between applications. Each VACUU·LAN® Mini-Network includes manual flow control valves for continuous suction power adjustment. Shut-off valves and electronical control are optionally available.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

Precision in PRO version The CY10 series precision balance is designed for fast, accurate and repeat (more)able weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 series precision balance: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance&rsquo;s memory &ndash; either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Precision balance and labelling scale in one device If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series precision balance can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

A stand, based on a tripod for supporting scale&#39;s indicator installed on a cable PUE C315. Mild  (more)steel version available.