Heraeus B6060

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Quality, reliable and affordable incubators. Additional technical features: - Powerful and fast refr (more)igeration system - Working temperature from 0°C to 100°C - External structure in oven-painted steel sheet - with antacid epoxy powder - Forced ventilation - Internal chamber completely in stainless steel - Second door in tempered glass - Display resolution 0.1 - RS-485 output - Data management software, cable and USB adapter as standard - Sterilization cycle (160°C for 2.5 hours) Uniformity of temperatures: - at 4°C: 0.7°C - at 37°C: 0.5°C - at 60°C: 1.0°C Temperature stability at: - at 37°C: 0.2°C Time to reach temperature: - at 37°C: 5 minutes - at 44°C: 6 minutes - at 60°C: 6 minutes Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Internal door in tempered glass

New Brunswick Scientific Innova 4230 Refrigerated Incubator Shaker Spares/Repair This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers but requires a replacement compressor and recharge as well as a new drive belt. It is sold for spares/repairs.

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

Thermo Scientific HERAcell 150i CO2 Incubator Double Stack This incubator was removed from a univers (more)ity lab where it was surplus to requirements. The unit powers up and has been tested with a thermometer(not included). It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Memmert IF750 Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 749 L (26.5 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF750 Forced Circulation Incubator 749L, 115V offers an expansive 749 L (26.5 cu.ft.) volume, making it an excellent choice for large-scale laboratory operations. Its setting temperature range spans from +20°C to +80°C, with a working range starting at Min. 10°C above ambient. The incubator features a robust ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display, allowing for precise control over key parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time. Its easy-to-clean stainless steel interior is reinforced with deep drawn ribbing and integrated heating on four sides, ensuring durability and optimal heat distribution. Designed for safety and efficiency, the IF750 includes an adjustable overtemperature monitor and mechanical temperature limiter TB, in compliance with DIN 12880 standards. The forced air circulation system, driven by a quiet air turbine, is adjustable in 10% increments, ensuring even airflow and precise temperature control. With space for up to 14 shelves and a maximum chamber load of 661 lbs, this incubator is suitable for high-capacity workloads. Additional features like AtmoCONTROL software, a fully insulated stainless steel door with inner glass, and autodiagnostic systems make the IF750 a powerful tool for any lab environment. INCLUDED: The Memmert IF750 Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

CLIMATE CHAMBERS KKP SMART PRO POL-EKO KKP - STABILITY AND NO VIBRATION WITH PELTIER TECHNOLOGY The  (more)Peltier technology of the KKP series offers stable, silent and vibration-free climate conditions, maintaining exceptional temperature and humidity variations and fluctuations. They are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 70°C (max 20°C below room temperature; without humidity) and thanks to a steam humidifier, they regulate humidity from 10% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KKP Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Temperature range without humidity 0…+70°C (max 20°C below room temperature) - Temperature range with humidity +5…+70°C (max 20°C below ambient temperature) - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and - Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm KKP SMART PRO SERIES POL-EKO offers 2 models of climatic chamber with Peltier cell: KKP 240 of 245 liters and KKP 750 of 749 litres. Reliable. For peace of mind. The Peltier cell-based cooling system features excellent temperature variation and fluctuation. It improves the temperature recovery time (for example after opening the door) and the humidity inside the chamber is extremely stable. In the images below, the temperature/humidity diagram with the test points displayed according to the ICH Q1 A (R2) guidelines and the recording of temperature and humidity over time. STEAM HUMIDIFIER KKP climatic chambers with steam humidifier do not emit ultrasound and therefore allow the reproduction of insects (e.g. Drosophila melanogaster). Furthermore, thanks to their wide temperature and humidity range they can be used for testing electronic components, plastics or building materials. ENERGY SAVING Thanks to latest generation technology, the KKP series humidifier heats very quickly, using only the water necessary. LOW WATER CONSUMPTION Water consumption is only 90 ml per day for KKP 240 and 290 ml per day for KKP 750 (at 40°C, 75% RH). Water consumption is so low that the tank will only need to be refilled every two months. Furthermore, thanks to a heater in the waste water tank, no maintenance is required and the climatic chamber can be installed anywhere. PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the structure and accessories of the KKP models. 1 - touch control panel 2 - USB port 3 - open door sensor 4 - ø30mm access port for external sensor 5 - room fan 6 - door handle with key lock 7 - shelf 8 - internal glass door 9 - main power socket 10 - fan for electronic compartment 11 - LAN 12 - cooling system based on Peltier modules 13 - humidifier module 14 - drying module 15 - demineralised water tank Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Stainless steel wire shelf - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door

17 Boxes of Mixed FisherBrand SureOne Pipet Tips Non filter + Aerosol Barrier Individually sealed a (more)nd brand new. 10 packs of 96 tips per box amounting to 960 tips per box Sizes are as follows: 100µl- 5 boxes (4800 tips)300µl- 3 boxes (2880 tips)10µl- 3 boxes (2880 tips)200µl- 1 box (960 tips)20µl- 2 boxes (1920 tips)1000µl -3 boxes (2880 tips) Also individually theres an additional: 10µl- 3 packs (288 tips)20µl- 3 packs (288 tips)200µl- 3 packs (288 tips)100µl- 6 packs (576 tips)300µl- 5 packs (480 tips) Mixed expiry dates between 2026-2028

Hoefer HE-PLUS Horizontal Nucleic Acid Electrophoresis System Gel Dimensions (W x L) 12.5 x 13.0 cm  (more) Maximum Sample Capacity 112 samples (4 combs, 28 samples each) Max. Power Settings 150 volts, 400 mA, and 45 watts Features - Compact and Easy to Use - Built-in Variable Power Supply with LED Display - Adjustable Power Supply from10 to 400 mA or 10 to 150 Volts - Built-in Timer with Audible Alert - Supports multichannel pipette-compatible combs for efficient loading and increased sample capacity - Durable construction with UV-transmitting material - Vented lid reduces condensation buildup - Automatically recalls the last-used voltage and time for faster setup on repeat runs The Hoefer HE-PLUS Horizontal Nucleic Acid Electrophoresis System is a compact, user-friendly solution for high-throughput nucleic acid separation. Featuring a built-in variable power supply with an LED display, this system provides clear visibility of voltage, amperage, and time, allowing precise control over every run. With an adjustable power range of 10 to 400 mA or 10 to 150 volts, the HE-PLUS is versatile enough for a wide range of applications. The integrated timer with a 99-hour, 59-minute limit and audible alert ensures efficient workflow management. Designed for high efficiency, the HE-PLUS supports a 96-well format compatible with multichannel pipettes, making sample loading fast and accurate. Its durable polycarbonate tank and UV-transmitting construction allow clear monitoring throughout the run, while a vented lid reduces condensation. Safety is prioritized with a microsensor that prevents operation without the safety lid in place. Additional features like the memory function for last-used settings make it easy to set up repeat runs, ensuring consistent results with minimal prep time. INCLUDED: The Hoefer HE-PLUS Horizontal Nucleic Acid Electrophoresis System includes: - Gel tank - Safety lid - Power supply - Large gel tray - Medium gel trays, 2 pieces - Large/medium comb 14/28 wells, 4 pieces - Casting stand - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

HRP EX Platform Wherever high readability and precision are important. Wherever good repeatability i (more)n harsh industrial conditions matters. HRP EX Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others HRP EX Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment HRP EX Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential HRP EX Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).