Cooling Incubator SMART ILP 240 POL-EKO

Percival AR75L Growth Chamber 2-Tier This item was removed from a university laboratory where it was (more) surplus to requirements. It is in good cosmetic and in good working order. (Thermometer & Socket tester not included) The previous client stated it was in good working order prior to removal and has been regularly serviced. During testing, it was observed that the top light bank has 8 tube lights fitted of a possible 10, 6 of the 8 illuminated.The bottom light bank has a full set of 8 tube lights fitted and 4 bulbs of a possible 8, all but 1 tube light illuminated. Specifications: - Model: AR75L - Serial No.: 3798.03.02H - Power Supply: 32 amp, blue three-pin plug

Memmert HPP2200eco Climate Chamber 2140L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 2140 L (75.6 cu. ft.) Features - Spacious 2140 L (75.6 cu. ft.) capacity for ample storage and incubation - Temperature range from +15 to +60 °C with humidity, or 0 to +70 °C without humidity - Precise 0.1 °C temperature control accuracy with dual Pt100 sensors - Humidity adjustable from 10% to 80% RH with external distilled water supply - TwinDISPLAY with PID microprocessor control and high-definition TFT screens - Programmable via AtmoCONTROL software with USB and Ethernet connectivity - AutoSAFETY protection with visual and acoustic alarms for temperature regulation - Stainless steel door with inner glass panes and 2-point compression locking system The Memmert HPP2200eco Climate Chamber 2140L, 115V offers exceptional capacity and control for rigorous storage, incubation, and environmental testing needs. With a spacious 2140-liter interior, this chamber provides a temperature range from +15 to +60 °C with humidity and 0 to +70 °C without humidity, giving precise control over varied storage environments. Dual Pt100 temperature sensors ensure accuracy within 0.1 °C, while humidity control ranges from 10% to 80% RH, supported by an external distilled water supply system and advanced humidification and dehumidification features. Engineered for easy management, the HPP2200eco features Memmert’s TwinDISPLAY with a PID microprocessor and vibrant TFT displays, delivering real-time data at a glance. Program settings via the AtmoCONTROL software over USB or Ethernet for versatile operation, and enjoy peace of mind with Memmert’s AutoSAFETY system, which provides visual and acoustic alarms for over- and undertemperature protection. Built with a durable stainless steel door with inner glass panes and a secure 2-point compression locking system, this chamber meets the high standards required for lab precision and safety. INCLUDED: TheMemmert HPP2200eco Climate Chamber 2140L, 115V includes: - 6 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

CABINET CSB60UB - CHEMISAFE Modular solutions for storing chemicals. - Entirely made of 15/10 mm th (more)ick electrogalvanized steel sheet, cold bent - External finish made of 90 micron acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Monocoque construction with feet for leveling the cabinets - Simple single layer swing doors - Lock and key - Door opening at an angle of 110° - External zip in corrosion resistant plastic - Compartments equipped with fixed retention shelves made of plasticized/painted/stainless steel with adjustable height - Connection collar Ø 125 mm - Standardized pictograms according to ISO 3864 standards Supplied: - 2 ripiani realizzati in acciaio plastificato (carico max 40 Kg distribuiti uniformemente) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Equipped with a rotating barrel with external gas connection. Temperature range: 15°C – 45°C Humidit (more)y range: 0 – 98% rH Diameter barrel: 375 mm Dimensions (HxWxD): 2135 x 1380 x 1080 mm Internal dimensions (HxWxD): 790 x 800 x 725 mm

MEMMERT ICH750eco climatic chamber - 750 litres ICH model: Incubator / drying oven with humidity con (more)trol Tested at 35°C / 65% humidity Year of manufacture: 2019 Non-refrigerated chamber (non-functional refrigeration unit) Temperature range: Ambient temperature + 10°C to 60°C Temperature delta, regulation: ± 2°C Adjustable useful humidity (% rh): 10 to 80 Volume: 749 litres Case: stainless steel exterior and interior Double glazed interior doors Intuitive, touch control interface and programmable settings 40 mm diameter access port at the rear as standard Models on casters Operation: with distilled water Supplied with 2 stainless steel grids and water tank External dimensions L x D x H (mm): 1224 x 834 x 1950 Internal dimensions L x D x H (mm): 1040 x 600 x 1200 Weight: 249 kg Power: 1350W Capacity Maximum load per tray (kg): 30 Maximum load per device (kg): 200 Equipment tested at: 35°C - 70% humidity 50°C - 50% humidity Test possible with your values ​​on request

This Sorvall H6000/HBB-6/HLR-6 5000rpm Swinging Bucket Rotor was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition with only minor marks from use. It has 6 x 1000ML Buckets. P/N 44040 The rotor is rated for 5000rpm Max. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Thermo Scientific Forma - 8600 Series 820CV Ultra-Low Temperature Freezer This item was removed from (more) a university where it was surplus to requirement. The unit powers up and is in good working order. It is in good cosmetic condition internally and externally.

Heidolph Rotavac Valve Tec Ultimate Vacuum 12 mbar Suction Capacity 0.75 m³/h Nominal Rotation Spee (more)d 1,800 RPM Features - Recommended for solvents with low or medium boiling points - Vacuum can be controlled through valves or manual vacuum controllers - A vacuum valve is necessary if you wish to combine this vacuum pump with Hei-VAP Expert Control/Ultimate Control rotary evaporators All components that come in contact with media are made from chemically resistant fluoropolymer. The durable PTFE design guarantees a superior diaphragm lifespan. Head cover and clamping disc have a stable core made from metal that offers unsurpassed long-term performance. The direct pump drive (without belt) has no wear parts, is exceptionally quiet and creates a very low vibration environment. The physically optimized gas ballast valve prevents from condensate collecting in the pump. Condenser is not in scope of delivery. INCLUDED: The Heidolph Rotavac Valve Tec includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Manufacturer: Beckman Coulter Model: J-26S XP BioSafe Three-Phase Description: The J-26S X sets the  (more)standard for performance, including high speed, low heat dissipation, imbalance tolerance and low noise level, and its wide range of separation capabilities is extended even further, now including three-phase filtration that further separates airlock material into solids, liquids and gases. The addition of a High Efficiency Particle Arrestance (HEPA) filter set makes the unit bio-safe. The J-26S XP centrifuge features a more impact-resistant lid, full containment barrier and automatic rotor detection. The ergonomic design - with lower unit height and hands-free door operation - remains unchanged. The J-265 XP can process six liters of fermentor output in less than 10 minutes, deliver a subcellular fraction at 82,000 x g, and run 24 microplates simultaneously. The unit automatically detects which rotor is installed and prevents the rotor from exceeding its maximum speed. It enables faster, quieter and more energy-efficient operation with better temperature control. The exclusive, high-torque SR (Switched Reluctance) drive reduces cycle times. Core features: - Processing six liters of digester output in less than 10 minutes. - Deliver a subcellular fraction at 82,000 x g - Run 24 microplates at once - Separate live cell populations with elutriation - Sterile filters prevent the escape of infectious material Specifications: Maximum speed: 26,000 rpm Acceleration: Maximum, slow or timed (1-10 minutes, 0-500 rpm). Deceleration: Maximum, Slow, Timed (1-10 minutes from 500-0 rpm) or Off Maximum capacity volume range: 1 - 6 L Refrigeration system: CFC-free, non-ozone depleting refrigerant Temperature range(s): 10°C - 40°C in 1 degree increments Weight: 290kg Dimensions (W x H x D): 71cm x 86cm x 86cm Power requirements: 220/380 VAC, 50 Hz, 3 phases Humidity restrictions:< 95% (non-condensing) Scope of delivery: - J-26S XP BioSafe Three-Phase without rotor - Instruction manual as PDF via e-mail If you need a suitable rotor, we are happy to help! The unit is in absolute top condition and has been 100% function tested.

An entry level system for imaging fluorescence and visible applications, the G:BOX F3 gel doc is the (more) ideal solution for your laboratory. Using your choice of dyes or stains, the G:BOX F3 automatically selects the right lighting and filters to detect close bands on both small and large gels. The stylish and modular designed G:BOX F3 gel doc system includes a high resolution 5m pixel camera which is capable of giving outstanding images with incredible spatial resolution as well as a motor driven zoom lens and a motor driven filter wheel as standard. Specifications: Image resolution: 5m pixels Effective resolution: 15.1m pixels A/D: 12/16 bit Greyscales: 65536 Lens (motor driven): Zoom f1.2. Illumination Epi LED white lights: Yes Max image area: 325 x 241 mm Min image area: 56 x 42 mm Dimensions (WxHxD): 570 x 840 x 450 mm Weight: 37 kg Optional: software € 1.269,=