Cooled Incubators FOC 200E Connect Velp

Thermo Scientific Heracell 240i CO2 Incubator This was removed from a university lab where it was su (more)rplus to requirements. The unit has no screen and required a new CO2 sensor prior to the screen being removed. It is sold for spares/repairs.

This Gallenkamp Shaking Incubator, Cat no. IOX400.XX2. Cr was removed from a university lab where it (more) was surplus to requirements. The device starts up with the shaking component functioning properly, however, the heating component is not operational. Therefore, it is listed as Spares or Repairs. It is in reasonably good cosmetic condition with minor marks.

New Brunswick Innova Model 4330 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The unit heats but does not cool. The shaking works, but requires maintenance. It is sold for spares/repairs.

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

Benchmark Incu-Shaker 10LR Shaking Cooling IncubatorFeatures - Exceptional temperature uniformity an (more)d accuracy - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10LR is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platformis also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10LR Shaking Cooling Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) Capacity 220 g R (more)eadability 0.0001 g Repeatability 0.0001 g Features - NTEP certified for compliance with legal-for-trade applications, ensuring reliable and accurate measurements in regulated environments - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I), provides high-precision measurements with a 220 g capacity and 0.0001 g readability. This NTEP-certified balance ensures accurate, reliable results for regulated environments. It includes a fanless ionizer, standard in AEN models, which neutralizes static charges without contact, ensuring stable, disturbance-free weighing. An external IR sensor enables touch-free operation, preserving cleanliness and enhancing accuracy by allowing users to interact with the balance without direct contact. The Electronically Controlled Load (ECL) management system supports repeatability testing and automatic precision checks without external weights, further reinforcing measurement reliability. The GX-224AEN features a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput settings where speed and accuracy are critical. Streamlining daily operations and ensuring USP41 compliance, this advanced tool alerts users when sample sizes fall below minimum weight, reducing waste and boosting efficiency. Impact shock detection and overload protection provide added durability, while six simple keys and a quick toggle function facilitate smooth switching between USB and RS-232C communication options for flexible data management. Enhanced usability features include an illuminated, front-mounted level for easy leveling, even with gloves on, along with automatic self-calibration and one-touch internal/external calibration to ensure valid results. An extensive range of measurement units, along with percent calculation and piece counting capabilities, add versatility for diverse scientific applications. With a robust design, NTEP certification, and advanced features like the IR sensor, the A&D Weighing Apollo GX-224AEN Analytical Balance is an outstanding choice for professionals seeking precise, regulated analytical capabilities. Backed by a five-year warranty, it promises both reliability and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AEN Analytical Balance, 220 g, 0.1 mg (NTEP Class I) includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

MA X2.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X2.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X2.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X2 Series moisture analyzers: Automatic opening and closing of the drying chamber 5” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X2.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X2 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

External dimensions (WxDxH): 1196 x 616 x 1968 mm Internal dimensions (WxDxH): 1050 x 524 x 1742 mm  (more)Weight: 483 kg Min. quantity of exhaust air 10 times: 10 m³/h Pressure difference at 10 times: 5 Pa Differential pressure at 10-fold EK5/AK4: 5 Pa Floor load: 528 kg/m² Maximum load: 600 kg Max. load tray: 60.00 kg Collecting capacity bottom sump tray: 29 litres

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW