Cooled Incubator SMART ILW 53 POL-EKO

Manufacturer: Binder Model: KBF 720 E5.2 Technical data: Temp MAX: 70 °C Temp MIN: 0 °C Volume: 700  (more)litres Sterile: No Width: 890 mm Width/inside: 576 mm Height: 1925 mm Height inside: 1250.0 mm Length: 1250 mm Depth: 1250 mm Depth inside: 973 mm Number of shelves/ grids: 2 Operation via touchscreen Weight: 309 kg Length inside: 973 mm Voltage: 230 V Interface type: USB|Ethernet Heaters and heating cabinets Features: with overheating protection|with infinitely variable temperature control|with internal glass door|with certification|with timer|with interface|with cooling|with data logger Power: 3100 W Type of convection: Natural Temperature accuracy: +/- 0.2 °C Incubator type: without CO2 supply Humidity range: 10 % r.h. to 80 % r.h. Material inside: Stainless steel Door suspension side: right|left Installation variants: stand-alone Type of temperature control cabinet: Constant climate control cabinet The appliance/system offered here has been tested and is fully functional and ready for use.

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair. The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚cThe temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚cFinally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c. Inside dimensions - D47 W50 H123cm1 Shelf - 41 x 49cm It is in reasonably good cosmetic condition with marks from use.

Memmert ICH750 Stability Climate Chamber 749L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 749L (26.5 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH750 Stability Climate Chamber 749L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH750 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH750 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH750 Stability Climate Chamber 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert HPP410eco Climate Chamber 384L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 384 L (13.6 cu. ft.) Features - 384 L (13.6 cu. ft.) capacity for flexible storage and incubation - Temperature range from +5 to +70°C with humidity, or 0 to +70°C without humidity - Precise temperature control with 0.1°C accuracy using dual Pt100 sensors - Humidity adjustable from 10% to 90% RH with external water supply - TwinDISPLAY with PID microprocessor control and high-definition displays - AtmoCONTROL software for USB and Ethernet programmability - AutoSAFETY with visual and acoustic alarms for temperature protection - Stainless steel door with inner glass and 2-point locking system The Memmert HPP410eco Climate Chamber 384L, 115V is designed to meet advanced climate control needs with its spacious 384-liter (13.6 cu. ft.) capacity. Engineered for precise temperature and humidity regulation, it offers a setting temperature range from +5°C to +70°C with humidity and 0°C to +70°C without. Dual Pt100 sensors in a 4-wire circuit provide reliable monitoring with a setting accuracy of 0.1°C, ensuring consistent conditions for sensitive applications. The humidity control ranges from 10% to 90% RH, supported by a self-priming external water supply and an efficient hot steam generator, while a Peltier-based cold trap system ensures effective dehumidification. User-friendly control features, including the TwinDISPLAY with an adaptive PID-microprocessor and two high-definition TFT displays, make it easy to adjust parameters like temperature, relative humidity, and program settings. The AtmoCONTROL software allows programmable control via USB or Ethernet, streamlining data management for long-term studies. Safety features like the AutoSAFETY system, visual and acoustic alarms, and robust stainless steel construction—including an inner glass door and a 2-point locking mechanism—ensure reliable operation and optimal protection of your samples. INCLUDED: TheMemmert HPP410eco Climate Chamber 384L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert HPP1060eco Climate Chamber 1060L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 1060 L (37.4 cu. ft.) Features - Generous volume capacity of 1060 L (37.4 cu. ft.) for versatile climate and stability testing - Temperature range settings from +5 to +70°C with humidity, and 0 to +70°C without humidity - Precise temperature control with 0.1°C setting accuracy and dual Pt100 sensors for reliable performance - Humidity range adjustable from 10% to 90% RH with efficient hot steam generator and Peltier dehumidification - Intuitive TwinDISPLAY ControlCOCKPIT featuring two high-definition TFT-color displays - Multi-language settings with support for German, English, Spanish, French, Polish, Czech, and Hungarian - Durable stainless steel door with 2-point locking and interior glass door for added insulation - Convenient data programming and management with AtmoCONTROL software via USB or Ethernet The Memmert HPP1060eco Climate Chamber 1060L, 115V is expertly designed to provide consistent and precise environmental conditions for sensitive testing applications. With a spacious 1060 L (37.4 cu. ft.) interior, it offers ample space for extensive climate and stability testing needs. Its temperature range spans from +5 to +70°C with humidity and 0 to +70°C without humidity, providing versatility for a wide array of research and material testing scenarios. The highly accurate 0.1°C temperature setting resolution, powered by dual Pt100 sensors, ensures reliable readings and consistent conditions essential for exacting scientific requirements. The HPP1060eco integrates cutting-edge control technology with its TwinDISPLAY ControlCOCKPIT, featuring dual high-definition TFT-color displays for real-time monitoring and adjustments. Designed with an energy-efficient Peltier heating and cooling system, it utilizes advanced humidification by hot steam generator and Peltier-driven dehumidification, delivering dependable humidity control within a range of 10 to 90% RH. Programmed and managed through AtmoCONTROL software, accessible via USB or Ethernet, this climate chamber also includes AutoSAFETY temperature protection, visual and acoustic alarms, and built-in self-diagnostics. Ideal for ICH-compliant stability testing and environmental simulations, this durable, stainless-steel chamber ensures reliability, precision, and performance in any lab setting. INCLUDED: TheMemmert HPP1060eco Climate Chamber 1060L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert HPP260eco Climate Chamber 256L, 115V Setting Temperature Range (without light, with humidity (more)) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 256L (9 cu. ft.) Features - 256 L (9 cu. ft.) capacity for versatile storage and climate control - Temperature range of +5 to +70 °C with humidity and 0 to +70 °C without humidity - Temperature setting accuracy of 0.1 °C for precise control - Equipped with two Pt100 sensors for reliable temperature monitoring and error management - Humidity range from 10 to 90% RH, controlled with a distilled water tank and self-priming pump - Features a hot steam generator for humidification and a Peltier cold trap for dehumidification - TwinDISPLAY with adaptive PID-microprocessor controller for easy monitoring and adjustments - AtmoCONTROL software allows programming, data management, and transfer via USB or Ethernet The Memmert HPP260eco Climate Chamber 256L, 115V provides reliable and precise climate control for advanced laboratory needs. With a spacious 256-liter capacity, it supports a versatile temperature range of +5 to +70 °C with humidity and 0 to +70 °C without, making it ideal for a range of incubation and storage requirements. The chamber achieves exceptional accuracy with a setting precision of 0.1 °C, and dual Pt100 sensors ensure reliable temperature monitoring and error handling. Humidity control ranges from 10 to 90% RH, utilizing a self-priming distilled water pump and efficient Peltier technology for dehumidification. This combination of features supports stable, uniform environmental conditions within the chamber. The unit's intuitive TwinDISPLAY control system, featuring a PID-microprocessor and two TFT-color displays, offers easy monitoring and adjustments for temperature, humidity, and time. AtmoCONTROL software enhances data management, allowing users to program, manage, and transfer data through USB or Ethernet connections. Designed for durability, the climate chamber's stainless steel interior and exterior ensure a hygienic and corrosion-resistant environment, with a fully insulated stainless steel door for temperature retention and an inner glass door for convenient viewing. The Memmert HPP260eco also includes an AutoSAFETY function with an over- and undertemperature monitor, providing visual and acoustic alarms, ensuring a high level of operational safety. INCLUDED: The Memmert HPP260eco Climate Chamber 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Manufacturer: Thermo Scientific / Revco Model: UGL-2320V Laboratory Freezer -20°C P/N: UGL2320V Desc (more)ription: Simplify operation and increase accuracy with the microprocessor control of Thermo Scientific Revco High-Performance Lab Freezers. Our Revco -30°C and -20°C high-performance freezers are designed for medical and scientific applications such as storage of reagents, pharmaceuticals, biologicals or other commonly used laboratory materials. Models offer cabinet sizes to fit a variety of space needs and storage volume requirements. Key Features: - Temperature factory-preset at -20° or -30°C. - Capacities from 4.9 to 51.1 cu. ft. (139 to 1447L). - Icon-based controls and displays. - Large, easy-to-read digital display shows temperature within 1°C. - Graphic thermometer is steady green when temperature is normal, flashes top bar for overtemperature, flashes bulb for undertemperature. Microprocessor Control: - Audible/visual warnings for overtemperature, undertemperature, or power failure. - Key-operated OFF/ON/ALARM ON master switch for setpoint security. - Push-button alarm test. - Remote alarm contacts. - Alarm silence, ringback, and auto reset. - Controller battery backup system. Construction: - Scratch-resistant cold-rolled steel interior and exterior finishes. - High-density, 2? thick (5.1cm) CFC-free urethane foam insulation protects against ambient temperature fluctuations. - CFC-free, HFC-blend refrigerant. - Single-door models are hinged on right. - Full-length door handle and key lock. - Doors self-close and lock open at 90°. - Adjustable epoxy-coated wire shelves. - 1? (2.5cm) dia. access port with plug on undercounter model. -20°C Freezers Features: Suitable for applications in which slight intermittent coil warming during an automatic defrost cycle is not desired (such as enzyme storage). Gravity convection air system for maximum stability without a blower or fan. Manual defrost. Specifications: Capacity: 659 L Dimensions (LxWxH) Exterior: 94.5 x 71.1 x 201.2cm Dimensions (DxWxH) Interior: 73.7 x 61 x 147.3 cm Temperature Range: -20°C Type: High-Performance Freezer Mains: 230V 50Hz Doors: Single, Solid   Refrigerant CFC-free 4 Shipping Weight: 193kg Temperature Control: Microprocessor Cabinet Type: Upright Defrost: Manual Items delivered: - Thermo Scientific / Revco UGL-2320V Laboratory Freezer -20°C - Shelves - Instruction Manual - Power Cord The laboratory freezer is good cosmetic as well as technical condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Ohaus mini vortex stirrers OHAUS mini vortex mixers are available in four models, for reliable, gent (more)le, and high-speed mixing. Fixed speed, analog, digital and pulse models. Fixed Speed: Economical choice for vigorous, high-speed, one-touch mixing for repeatable applications. Analog control: adjust the speed as you want, you don't need precise repeatable results; speed control knob with graduation marks between 1 and 10. Digital control: adjust the speed easily and precisely, for repeatable results; control via LED display for speed and time, with buttons for adjusting the default values. Pulse vortex: pulse action that reduces heat generation, ensuring effective cell mixing and fractionation; control via LED display for speed and time, with buttons for adjusting the predefined values ​​and button for impulse control. - In tactile mode, mixing is activated by pressing the cupped head, while the continuous mode allows the use of accessories. The sturdy and stable structure ensures that the unit remains in place during use. - Rugged digital and analog vortex mixers allow for effective speed control, from low-rpm starting for gentle shaking to vigorous, high-speed vortex mixing of samples. Applications Resuspension fluids, mixing reagents, buffers and emulsions, ELISA tests, drug extractions, mixing samples Display Digital Models: Independent LED displays with speed and time information that allow the operator to view both settings simultaneously. Analog Models: Marked knobs for variable speed control. Operation Detachable three-wire cable and plug (included) Structure For all models: Accessory platform of about 7 cm with cup head for beakers, flasks, test tubes, etc ... For pulse model: holder for 12 stainless steel microtubes. Construction features Digital Models: Integrated chip control maintains set speed for constant mixing. Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Beckman Centrifuge Rotor SW-28 28,000rpm This was removed from a university lab where it was surplu (more)s to requirements. It is in good cosmetic condition with minor marks. Beckman SW-28 28,000 rpm Serial No. 05U 10874Six Beckman swing buckets SW 28 38.5ml

Labconco CentriVap Proteomic SystemVacuum concentrator: Uses centrifugal force, vacuum and contr (more)olled temperature from -4C upto +100C Sensor that reads internal chamber temperature Vacuum port with quick disconnect fitting for 0.25 in. ID tubing Has quick-stop system, control panel and glass lid DNA rotor accommodates up to 60 each 1.5 ml and 72 each 0.5 ml microcentrifuge tubes Cold trap: CFC/HCFC-free refrigeration system with 1/3 hp compressor Reaches -50C (-58F) for solvent recovery and to protect the vacuum pump by trapping moisture, vapors and corrosive fumes as they evaporate from the samples Temperature graph that illuminates green when the collector coil reaches operating temperature of -40C 4-liter stainless steel collector Acrylic lid with two Quick-Disconnect fittings INCLUDED: The Labconco 7989600 CentriVap Proteomic System, 115V, 60Hz includes: - Refrigerated Benchtop Vacuum Concentrator w/ Glass Lid - Cold Trap -50°C - DNA Rotor - Vacuum Tubing - Clamps x 6 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty