Cobas EIA Incubator

Sanyo C02 Incubator Model: MCO-19AIC (UV) Lab This item was removed from a university where it was s (more)urplus to requirement. The unit powers up, is in good cosmetic condition, and has been temperature tested (thermometer & CO2 probe not included).When the CO2 was tested, the unit did not stabilize at 5% and instead rose to 8.2% - 8.4% during testing. Therefore, it is listed as Spares/Repair. Internal Dimensions: L 45cm x W 44cm x H 66cm.

Jouan EB115 EL TS SN Incubator This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and has been tested with a temperature probe (not included). It is in good working order and cosmetic condition with minor surface damage present.

Benchmark SureTherm CO2 Incubator, 180L with High heat Decontamination Cell cultures depend on optim (more)ized growth conditions in order to thrive. With precise temperature and CO₂ control, Benchmark’s SureTherm™ Incubators provide the perfect environment for your cultures. All SureTherm™ Incubators feature a proprietary heat distribution system that combines six sided heating with a low speed internal fan. Air is circulated uniformly throughout the chamber without air exchange from the external environment. This results in a controlled, protected environment with minimal temperature fluctuations (within 0.1°C). These are the first and only incubators equipped with our (patent pending) IncuView™ LCI (Live Cell Imaging) technology for viewing cells in “real time”. An internal microscope and large, external display allow cells to be viewed without removal from the incubator, eliminating the inherent temperature fluctuations and risk of contamination. Cells are easily viewed on the large, integrated display or viewed locally or remotely with a wifi enabled phone, tablet or computer.** Cell viewing requires optional IncuView Integrated Microscope Shelf (Item H3565-45-LCI or H3565-180-LCI.)INCLUDED: The SureTherm CO2 Incubator, 180L with High heat Decontamination includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert IF55 Forced Circulation Incubator 53L, 115V Working Temperature Range Min. 10°C above ambie (more)nt up to +80°C Convection Type Forced Air Chamber Volume 53 L (1.1 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 53 L (1.1 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF55 Forced Circulation Incubator 53L, 115V offers precise temperature control and efficient forced air circulation, making it ideal for a variety of laboratory applications. With a setting temperature range of +20°C to +80°C and a working range starting at 10°C above ambient, this incubator ensures consistent performance for temperature-sensitive processes. The spacious 53L (1.1 cu.ft.) interior is made from reinforced stainless steel, designed for easy cleaning and long-lasting durability. Its ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller, complete with a high-definition TFT-color display, allows for accurate adjustments of parameters such as temperature, fan speed, air flap position, and program time. In addition to its advanced functionality, the IF55 includes several safety features, such as an adjustable overtemperature monitor and mechanical temperature limiter (TB) that meet protection class 1 standards according to DIN 12880. The forced air circulation system, powered by a quiet air turbine adjustable in 10% steps, includes the option for pre-heated fresh air admixture to further enhance control over the incubation environment. With a maximum chamber load of 176 lbs and each shelf supporting up to 44 lbs, the IF55 is built for reliability and precision, offering advanced AtmoCONTROL software for programming and data management via Ethernet or USB. INCLUDED: TheMemmert IF55 Forced Circulation Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

Faithful HWS Series constant temperature and humidity incubators. Volume: 70 L (HWS-70B), 150 L (HW (more)S-150B) and 250 L (HWS-250B). Forced ventilation. Temperature range: with humidity 10 to 65 ∫ C; humidity 0 to 65ºC. Resolution 0.1 ºC. Stability: high temperature ± 0.5 ºC; low-temperature ± 1ºC. Uniformity ± 1ºC. Humidifier ultrasonic manual. Range humidity 45% - 95%. Stability humidity ± 5% RH. Stainless steel. Antiescarcha. Control automatic humidity/temperature. Timer 0-99,9 h/cycle. Control over temperature. Automatic recovery after cutting. Interior light. Not CFC. Optional: sterilization by UV light, printer, RS485, alarm, SMS, wireless, USB, data storage, touch screen. The price shown is for the model 70 L (HWS-70B). For other models, use the drop-down.

BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul Volume Range 15 t (more)o 300 ul Accuracy 0.6% / 1.8 ul at 300 ul Pipette Type Air Displacement Features - Ergonomic design with adjustable finger rest for comfortable, fatigue-free pipetting - Multiple operating modes: standard pipetting, reverse pipetting, mixing, gel loading, and dispensing - Intuitive four-button control system with a clear digital display for easy operation - 360° rotating pipetting unit for customizable hand positioning and improved comfort - Easy Calibration technology enables quick, tool-free adjustment for maintaining accuracy - Autoclavable pipette shaft for convenient sterilization and contamination prevention - Effortless tip mounting and ejection with minimal force required due to O-ring design - Long-lasting NiMH battery supports over 4,000 pipetting cycles per charge - Continuous use during charging with a 1-meter charging cable - Battery Refresh function extends battery life and optimizes performance The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul combines ergonomic design with cutting-edge functionality to streamline liquid handling tasks in multi-well plate formats. With an adjustable volume range of 15 to 300ul and 12 channels, it offers flexibility and precision for a variety of applications. Partial volume options of 300ul, 150ul, and 30ul provide added versatility for routine and specialized workflows. This pipette is designed for ease of use, featuring a lightweight construction and a 360-degree rotatable pipetting unit for individualized comfort. Its intuitive interface simplifies navigation, while the integrated Easy Calibration technology allows quick, tool-free adjustments to ensure consistent performance. Built for durability and precision, the BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul is an essential tool for efficient and accurate pipetting in any laboratory setting.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette-12 Electronic Multichannel Pipette, 15 to 300ul includes: - 1 x TipBox - 1 x TipRack Refill Pack - Device Stand - Rechargeable Battery - Power Adapter - Reagent Reservoir - Assembly Aid - Grease - 1 Set of Sealing Rings - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Character communication protocol is designed for communication between RADWAG balance and external d (more)evice via RS232, Ethernet or Wi-Fi* interfaces. The protocol consists of commands sent from the external device to the balance and responses sent from the balance to the device. Responses are sent from the balance each time a command is received as a response to the command. The commands that make up the communication protocol allow you to obtain information about the status of the balance and ways to influence its operation, for example, they allow you to receive weighing results from the balance, control the display, etc.

2 racks of 24 stainless steel test tubes D: 20/21mm In stainless steel 2 laboratory racks of 24 tube (more)s (6 out of 4) For tube diameter: 20 or 21 mm