Boekel Scientific 151250 Digital Forced Air Incubator, 2.5 cu. ft. w/ Removable Light Shield, 115V

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This RS Biotech RS Biotech Galaxy R CO2 Incubator Model - 170-300 was removed from a university lab  (more)where it was surplus to requirements. The item is in good cosmetic condition but due to the control panel being removed, we are unable to perform any test. Therefore, it is being sold as Spares or Repairs.

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212236External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm1 Tray - 40 x 29 x 5cm Bottom:-Model - MCO-20AICSN - 60305034External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

FX Incubator dry block. Temperature range from ambient to 75 °C. Preheat time: 30 minutes. For tubes (more) and plates up to 96 wells. Exterior dimensions: 220x130x135 mm. Weight 3.5 kg. The FX Incubator dry block  is a high quality laboratory device designed to provide precise control. With its compact and easy-to-use design, this dry block is ideal for a variety of applications. It has a digital display that shows the temperature in real time and allows for precise adjustments. In addition, its uniform heating system guarantees a homogeneous temperature distribution in all samples. The FX Incubator dry block is a reliable and efficient tool for any laboratory.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature range: 2°C to 20°C Content: 104 L Dimensions (WxDxH): 595 x 640 x 1001 mm Weight: 43 kg  (more)Explosion proof

This was removed from a university lab where it was surplus to requirements. The unit does not power (more) up. It is sold for spares/repairs

Memmert IN30 Natural Convection Incubator 32L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 32 L Features - 32 L (1 cu.ft.) stainless steel chamber for compact sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit ensures precise monitoring - ControlCOCKPIT with SingleDISPLAY, featuring an adaptive digital PID-microprocessor controller with high-definition TFT display - Natural convection system for consistent temperature distribution - Electronically adjustable air flap for pre-heated fresh air admixture - Max chamber load of 132 lbs for high-capacity sample handling - Autodiagnostic system with adjustable overtemperature monitor for added safety The Memmert IN30 Natural Convection Incubator 32L, 115V is a reliable, compact solution for precise temperature control in laboratory applications. With a 32 L (1 cu.ft.) stainless steel chamber, this incubator is designed to handle diverse sample needs within a temperature range from at least 5°C above ambient to +80°C. Equipped with a highly accurate Pt100 sensor DIN class A in a 4-wire circuit and the ControlCOCKPIT SingleDISPLAY digital PID-microprocessor, adjustments are easily managed on its high-definition TFT display. The natural convection system ensures uniform temperature distribution throughout the chamber, while an electronically adjustable air flap allows pre-heated fresh air flow. The incubator supports a maximum chamber load of 132 lbs and incorporates an autodiagnostic system with adjustable overtemperature monitoring for dependable performance and safety. INCLUDED: The Memmert IN30 Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Hermle 6 x 50ml rotor The Hermle 6 x 50ml rotor is a high-performance centrifuge rotor designed for  (more)use with the Hermle Z32-HK, Z307, and Z327 series centrifuges. It has a maximum capacity of 6 x 50ml, allowing it to process a large volume of samples at once. The rotor's 40° angle helps to ensure optimal separation of samples during centrifugation. With a maximum speed of 6,000 RPM and a maximum RCF of 4,427 x g, the Hermle 6 x 50ml rotor is capable of high-speed separations, making it ideal for applications such as molecular biology, biochemistry, and clinical research. INCLUDED: The Hermle 6 x 50ml rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Adam Equipment SPB 723I Solis Precision Balance, 720g, 0.001g Capacity 720g Readability 0.001g Repe (more)atability 0.002g Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Precision Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. The Solis Precision Balance line features 11 different models that offer internal or external calibration, capacities from 360g to 8200g, and readabilities from 0.001g to 0.01g. The Solis Precision Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment SPB 723I Solis Precision Balance, 720g, 0.001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty