BINDER BD-115 incubator / drying oven with forced convection 100°C

Corning ACI oven / incubator

Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V Temperatur (more)e Range Ambient +5°C to 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 92L glassware drying natural convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF260 Forced Circulation Oven 256L, 115V Working Temperature Range Min. 10°C above ambient  (more)up to +300°C Oven Type Forced Air Circulation Chamber Volume 256 L (9.04 cu.ft.) Features - Volume of 256 L (9.04 cu.ft.) - Working temperature range from Min 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C, and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF260 Forced Circulation Oven 256L, 115V stands as a pinnacle of precision and durability in laboratory ovens. Engineered to maintain a broad setting temperature range from +20 to +300°C and a working temperature range that starts from just 10°C above ambient up to the maximum, this oven meets diverse heating requirements with flawless efficiency. Its high-definition TFT-color display coupled with the ControlCOCKPIT, an adaptive multifunctional digital PID-microprocessor controller, offers unparalleled user control and monitoring, ensuring optimal performance in any lab setting. Safety and usability are at the core of the Memmert UF260 design. It features a robust stainless steel interior that is easy to clean and designed to withstand rigorous use, complete with deep-drawn ribbing and integrated heating on all four sides for uniform temperature distribution. The oven includes a sophisticated air circulation system controlled by a quiet air turbine that can be adjusted in 10% steps, along with a pre-heated fresh air admixture feature. Additionally, comprehensive safety mechanisms, such as an adjustable electronic overtemperature monitor and a mechanical temperature limiter, protect against overheating. The UF260 is not only a testament to Memmert's commitment to quality but also an essential asset for any laboratory requiring reliable and precise thermal processing. INCLUDED: TheMemmert UF260 Forced Circulation Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN260plus Natural Convection Oven 256L, 115V Setting Temperature Range +20°C to +300°C Conv (more)ection Type Natural Convection Chamber Volume 256 L (9 cu. ft.) Features - Internal volume of 256 L (9 cu. ft.), ideal for large capacity applications - Working temperature range from +5°C above ambient to +300°C, perfect for various laboratory tasks - Precise temperature control with a resolution of 0.1°C up to 99.9°C, 0.5°C from 100°C, ensuring accuracy - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays for easy monitoring and control - AutoSAFETY feature with integrated over- and undertemperature monitor "ASF" to ensure the safety of sensitive samples - Admixture of pre-heated fresh air via an electronically adjustable air flap for enhanced air circulation - Robust stainless steel interior with reinforced ribbing and integrated large-area heating for durability and hygiene - Maximum chamber loading of 661 lbs. with a maximum per shelf loading of 44 lbs., providing ample support for heavy-duty applications The Memmert UN260plus Natural Convection Oven 256L, 115V is designed to provide precise and consistent heating for a variety of laboratory applications. With a large internal volume of 256 liters (9 cu. ft.), it offers ample space for handling large batches or bulky materials. The oven operates within a temperature range of +5°C above ambient to 300°C, ensuring flexibility for both low and high-temperature tasks. The integrated TwinDISPLAY features a high-definition TFT-color display and a PID-microprocessor controller, allowing for easy adjustments and monitoring of temperature, airflow, and timing parameters. The oven’s two Pt100 sensors work in tandem for mutual monitoring, ensuring continuous temperature accuracy and reliability. Safety and efficiency are paramount in the design of the Memmert UN260plus. The oven is equipped with AutoSAFETY, which includes over- and under-temperature monitoring with the ASF system, providing immediate alerts for any temperature deviations. Fresh air admixture is optimized through an electronically adjustable air flap, ensuring uniform heating. The durable stainless steel interior is easy to clean, corrosion-resistant, and reinforced with large-area heating on four sides, making it perfect for rigorous use in demanding environments. With a maximum chamber loading capacity of 661 lbs. and high-quality construction, this oven is an ideal solution for laboratories requiring robust and reliable thermal performance. INCLUDED: TheMemmert UN260plus Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert UN75 Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Convection T (more)ype Natural Convection Chamber Volume 74L Features - 74 L (2.6 cu.ft.) chamber volume suitable for various sample sizes - Temperature range from +5°C above ambient to +300°C for flexible applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - SingleDISPLAY digital PID-microprocessor controller with high-definition TFT-color display - Natural convection system ensures uniform heat distribution - Pre-heated fresh air admixture via electronically adjustable air flap - Sturdy, corrosion-resistant stainless steel interior with integrated heating on all sides - Powerful 115 V, 50/60 Hz, approx. 1800 W design for consistent performance The Memmert UN75 Natural Convection Oven 74L, 115V offers precise temperature control from +5°C above ambient to 300°C, ideal for various applications in laboratory settings. With a spacious 74 L (2.6 cu.ft.) chamber, this oven accommodates a range of sample sizes while maintaining consistent, uniform heating through its natural convection system. Its SingleDISPLAY digital PID-microprocessor controller provides easy monitoring with a high-definition TFT display, complemented by a Pt100 sensor DIN class A in a 4-wire circuit for precise temperature regulation. Designed for durability, the oven features a corrosion-resistant stainless steel interior with integrated heating on all sides and an electronically adjustable air flap for optimal air exchange, powered by a reliable 115 V, 50/60 Hz setup at approximately 1800 W. INCLUDED: The Memmert UN75 Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IO T 1.10 Enhanced wire grid tray Drying oven enhanced wire grid tray Dimension (L x D):546 mm x 410 (more) mmMax. loading capacity: 60 kg The IO T 1.10 Enhanced wire grid tray Drying oven enhanced wire grid tray is brand new in box . Includes a Full 1 Year Parts and Labor Warranty.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

CLIMATE CHAMBERS KK SMART PRO POL-EKO KK - RELIABLE AND HIGHLY CUSTOMIZABLE Built and designed witho (more)ut compromise, they are successfully used in medical, biotechnological, chemical and industrial laboratories. An important application is pharmaceutical stability testing according to ICH Q1A (R2) - (CPMP/ICH/2736/99). They maintain a constant temperature from 0°C to 60°C and thanks to an ultrasonic humidifier, they regulate humidity from 30% up to 90%. They are equipped with the most advanced POL-EKO control panel: the Smart PRO touchscreen. Large 7' display, WiFi for communication and data transfer, programming, alarms, internal memory for recording and overview of data in graphic form and much more, including standard software for complete management via PC. Continue reading and discover all the other surprising features of these climatic chambers! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. Thanks to SMART PRO you will be able to have possibilities that you didn't have before. Cutting-edge functions and freedom of transfer and remote use, thanks to LabDesk software. You can find all the features of the SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PRO PANEL? - Sharp 7' color touch screen - LAN, USB and WiFi ports for communication and data transfer - Fast, multi-segment, time and temperature programming - Adjustable ramps - Recording of the minimum, average and maximum temperature value for each segment - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - Fan speed control 0...100% or 10%...100% (depending on chamber capacity) - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Temperature sensor failure alarm - Event log with user notifications - Controls can be managed even when wearing latex gloves - Overview of the set and current parameters during operation in tabular and graphical form - Operation in temperature or time priority mode - Ability to create user accounts with assignment of rights and passwords - Memory of 40 user programs - Data log – 10,000 data records for each user, ability to view data on screen in tabular or graphical form - Direct data download via USB port - Event log QUALITY FIRST Resistant. Durable. POL-EKO climatic chambers are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The climatic chambers of the KK Smart series are builded with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal glass door - Interior made of acid-resistant stainless steel according to DIN 1.4301 - Stainless steel grill shelf (INOX) - Overtemperature protection class 3.3 according to DIN 12880 - Castors - Quality control protocol (at +25°C and 60%rH) - Automatic defrost function - USB port, LAN (with cable) and Wi-Fi connection - Lab desk software - External probe insertion hole diam. 30mm to the left - Deionized water tank - Open door alarm - Available with FIT: phytosystem – day and night simulation with intensity control. To find out more, download our informative pdf: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. NOTE: the temperature range that can be used with FIT active is +10°C... +50°C. KK SMART PRO SERIES POL-EKO offers 9 climatic chamber models with capacities from 109 to 1485 litres. Unleash your possibilities. In the image below, the graph shows the excellent working range (humidity/temperature) that the POL-EKO climatic chambers are able to offer you, with the KK series (ultrasonic humidifier) ​​and with the KKS series (steam humidifier ). ULTRASONIC HUMIDIFIER Climatic chambers with ultrasonic humidifier are professional and reliable tools to guarantee stable and precise conditions. The maximum temperature of 60°C allows it to be used for seed germination, mushroom and plant cultivation or for food testing. The perfect climatic conditions allow stability testing of pharmaceutical and cosmetic products, as well as packaging and electronics. NOTE: For the KK series, deionized water (1 μS/cm) must be used. Feed water source: deionized water tank; deionizer; internal deionized water network. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Fan 3 - Internal glass door 4 - Hole for ø30mm external probe 5 - Shelf 6 - Position of the condenser 7 - Wheels with lock 8 - Solid external door (optionally with window) 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Container for deionized water 2 - Power cable 3 - Connectors 4 - Connectors (to a tank with demineralised water or deionizer) 5 - Service connector 6 - Connection to the drain 7 - Main switch 8 - LAN port 9 - Fuse For larger models (KK 500 / 700 / 1200 / 1450): a - Power cable b - Container for deionized water c - Condensate collection tray with pump d - Main switch e - LAN port f - Fuse Together with the climatic chamber you will also receive: OPTIONS POL-EKO allows you to increase the possibilities of your climatic chamber with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the inside of a climatic chamber with LED series Fitotrone System.. - Door with panoramic window - Perforated shelf - Reinforced shelf - Stainless steel basins - Phitotron FIT system - Internal socket - Water level sensor - IQ OQ PQ calibration and qualification - Backup battery for the display in case of power failure - Clean contact - Non-standard 20/60/100 mm access door - Additional 30 mm access door ◉ POL-EKO CUSTOMERS The SPEKTROCHEM research and development center for paints, adhesives and polymers has been a loyal POL-EKO customer for several decades. Use climatic chambers for tests on water-based raw materials prepared in the laboratory.

The Eppendorf DASGIP EGC4 Module in combination with the Peltier Exhaust Condensers provides liquid- (more)free exhaust condensation for up to four vessels. Proven effective for the DASbox Mini Bioreactor and for the mini scale BioBLU 0.3 Single-Use Bioreactors, this innovative technology can also be utilized with the larger vessels of the Eppendorf BioBLU family, BioBLU 1c, 1f, 3c, 5c, and 5p. Optimum recovery of condensate prevents volume loss due to evaporation and associated changes in osmolarity as well as blocking of exhaust filters. No cooling agent or chiller is needed so users benefit from easy handling.

This CTC Analytics Leap HTC PAL Autosampler HPLC was removed from a university lab where it was surp (more)lus to requirements. All units are in good cosmetic condition and powered up. We are unable to test the system further at our facility. Autosampler consists of:Autosampler main unit MXY 01-01BSerial No. 113399 Power supply unit MN01-00 Injector unit MZ01-00DSerial No. 980 Control key pad/screen MB 01-00A 2 x pumps MV 02-01ASerial Nos. 2961, 2963 Sample tray 3 drawer storage MP 02-00B Needle wash unitBottle shelf

New Brunswick Innova 4300 orbital incubator. Temperature range: ambient +5ºC to 60 ºC. Rapid tempera (more)ture equilibration. Shaking speed 25 to 500 rpm. Orbit eccentricity 2.5 cm. Maximum Erlenmeyer flask capacity: 30 units (250 mL); 4 units (6L). Timer 0.1 to 99.9 h or continuous. Pedal-operated lid lifter. Viewing window. External dimensions: 66*110*94cm (FLA); 160 kg. User manual. Discover the New Brunswick Scientific INNOVA 4300 Orbital Incubator at Galileo Equipment. Ideal for advanced research, this equipment offers precise temperature and agitation control, ensuring consistent and reproducible results. Its robust design and cutting-edge technology make it the perfect choice for laboratories seeking efficiency and quality. Buy now and power your experiments with trusted technology. Explore our exclusive offers on laboratory incubators!

Four load cell ramp platforms