Benchmark H3565-180HD SureTherm CO2 Incubator, 180L with High heat Decontamination

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Temperature range: -5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluctuation  (more)(at 40°C): ± 0.1 K Temperature uniformity (at 5°C): ± 0.6 K Temperature uniformity (at 25°C): ± 0.2 K Temperature uniformity (at 40°C): ± 0.3 K Warming up time (to 40°C): 5 min Cooling down time (fromt 40°C to 5°C): 58 min Recovery time after door was opened for 30 sec (at 5°C): 4 min Recovery time after door was opened for 30 sec (at 40°C): 1 min Maximum load: 40 kg Maximum load per shelf: 15 kg Capacity: 53 L Dimensions (WxHxD): 635 x 835 x 580 mm Interior dimensions (WxHxD): 400 x 400 x 330 mm Weight: 72 kg

Infors Shaking Incubator Model-AI 72 Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, but the door does not remain shut. The unit powers on, however, when setting the desired temperature, it remains at ambient temperature and does not raise to lower. Therefore, it is listed as Spares/Repair.

RS Biotech Galaxy R CO2 Laboratory Incubator Model 170-300 This was removed from a university lab w (more)here it was surplus to requirements. The unit has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. 2 Shelves - 52 x 48cm

3M Invivo2 400 Hypoxia Workstation Lab This item was removed from a university where it was surplus  (more)to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

Incubator CO2 BJPX-C Series. Models: 50 L (BJPX-C50), 80 L (BJPX-C80) and 160 L (BJPX-C160). Shirt  (more)air (optional for BJPX-C160 water jacket). Temperature range RT+5 to 60ºC. Stability ± 0.2 ° C uniformity (at 37ºC) ± 0.3 ºC. Range CO2 0 - 20%. Control, CO2 by infrared sensor. Sterilization by UV lamp, model shirt ire (optional water jacket).Timer 999 h, or continuous. Alarm of over-temperature and levels of CO2. Two trays are adjustable. Chamber of stainless steel. It shows the price for the model 50 L (BJPX-C50). For other models, use the drop-down.

Ohaus Scout SKX222 portable scale, with plate Ø120mm The OHAUS Scout scale, with its large backlit L (more)CD display and integrated educational software, is the ideal tool for use in the classroom. It offers premium quality overload protection, fast stabilization times, increased range, more connection options and stackable design - the most advanced learning weighing experience. Applications Weighing, density determination, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth ™ (available as an accessory) Construction ABS housing, stainless steel pan, ABS draft shield (1mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Characteristics of the project Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software overload / underload protection, low battery indicator, automatic shutdown, automatic tare, span calibration mass included on models with capacity up to 620 g Applications integrated in the scale: - Weighing: allows you to calculate the weight of the samples in the selected unit of measurement. - Density determination: calculation of the density of solids or liquids. Thanks to the integrated weigh below hook, it is possible to carry out tests for the specific gravity of objects that cannot be placed on the weighing pan. - Molar concentration: calculation of the mass of a sample and automatic conversion into the molar concentration.

Star Lab PCR Workstation AirClean 600 This was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good working order. It is in good cosmetic condition but has some marks from use. It has no stand.

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The roller scale is designed for weighing heavy, large-size packages such as pallets or crates. It a (more)llows for final product mass control before it enters the warehouse or is transported to the customer. Depending on the application, the scale can be made in a powder-coated version, dedicated for use in warehouses, or in a stainless-steel version, intended for use in wet environments. Operation Ergonomics The scale has a large 10-inch touch screen, which is comfortable and intuitive to use. Operation of the roller scales does not require additional training, as the software of all RADWAG checkweighers is unified. Select an Interface That Your Production Line Supports RADWAG roller scales offer the option of using one of four industrial interfaces, depending on your requirements. All our interfaces allow you to: start and stop the dynamic weighing procedure remotely (Start and Stop function), enter the batch number (Batch Number Readout function), select a product (Select Product During Standstill function). Do You Want Your Scale to Work With a Barcode Scanner? Our roller scales are compatible with barcode scanners: 1D and 2D, manual and automatic. Data contained in one-dimensional (bar) barcodes can be read using 1D scanners. 2D scanners, on the other hand, can read 2D codes, which are large amounts of data encoded in images composed of black and white squares. You can use our scales if you have a manual or automatic scanner mounted above your production line. Roller Scale and Printer – The Perfect Combination Do you use a RADWAG roller scale but not a printer? You have no idea what you are losing. You can easily print a ready report (e.g. statistical or PGC) at any time thanks to the direct connection between the scale and a printer. Do you require product parameters or information on a specific operator? Just select, press “print”, and you’re done. The automatic printout function allows you to receive an automatic frame, i.e. information sent to your computer or printer, immediately after weighing. What does this mean for you? Possibility of recording weighings in real time. You can customise the automatic frame based on your preferences. What do you need? Mass? Product code? Date? You got it. Weigh the Product and Print the Label Do you print labels to identify products in your company? If so, you understand how time-consuming and tedious your work would be without a label printer. We have some exciting news for you: RADWAG roller scales are compatible with label printers. Our product range includes a label printer that can print thermal and thermal-transfer (paper, foil) self-adhesive labels. The printer communicates with the roller scale via Ethernet or RS 232. Capability to Record Measurements The local SQL database system and integration with the multifunctional server software E2R Checkweigher allow measurements to be recorded and processed. Does Your Line Require Special Control Algorithms? The RADWAG roller scales software allows you to adjust the scale operation to the specific requirements of your line. Approval The scale is MID approved. Custom Designs The scale can also operate in feeder mode by controlling the feeding valves.

Ohaus ISLDMPHDG Incubating Shaker The Ohaus ISLDMPHDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and are optimized for shaking microplates, deep-well plates, or micro-tubes. The ISLDMPHDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLDMPHDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload. The Ohaus ISLDMPHDG Incubating Shaker is brand-new . Includes: Power Cord Operator's Guide Manufacturer's Documentation Full 2 Year Parts and Labor Warranty Ohaus ISLDMPHDG Incubating Shaker SpecificationsTemperature RangeAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°CSpeed Range100 to 1200 rpmSpeed Accuracy± 2%Timer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity4 microplates or 2 micro-tube racksTray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Overall Dimensions (L x W x H)17 x 11 x 7.75" (43.2 x 27.9 x 19.7 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(4) { background-color: #fffacd; }