Benchmark H2265-HC MyTemp 65HC Digital Cooling Incubator

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

This was removed from a university lab where it was surplus to requirements. Both incubators power u (more)p and have been tested at 5% CO2 and 37&50˚C with a temperature and CO2 sensor (not included). They are both in working order. The incubators are in good cosmetic condition with only minor marks from use. Top:-Model - MCO-20AICSN - 01212218External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm Bottom:-Model - MCO-20AICSN - 01212221External Dimensions - D72 W77 H102cmInternal Dimensions - D51 W61 H66cm4 Shelves - 45 x 58cm

PHCBI CO2 Incubator Model - MCO-170AICD-PE Lab This item was removed from a university where it was  (more)surplus to requirement. The unit powers up and is in good working order (thermometer not included). Also includes the following: 1 x Shelf:  47 x 45 cm

Yamato IC-603CW General Purpose Incubator with Window 159L, 115V Temperature Range Ambient +5°C to  (more)80°C Temperature Distribution Accuracy ± 1.0°C Chamber Volume 159L Features - Space saving - All lab incubator models come with either an observation window (W) for improved visibility or solid door - Dual door system permits contents to be viewed easily without disrupting atmosphere of the lab incubator (except IC-100 series) - Control panel of IC103C/113C located at a higher position for easy access - Easy to use digital setting display and timer - Air jacket technology ensures even and efficient heat distribution throughout the lab incubator chamber - Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock - Models 400 to 900 have an option for communication port (R) Economical general purpose 159L natural convection incubator with observation window. The dual door system permits contents to be viewed easily without disrupting the atmosphere of the incubator. Easy to use digital setting display and timer. Air jacket technology ensures even and efficient heat distribution throughout the chamber. Standard equipped with various functions such as self-diagnostic, calibration off-set, overheat prevention and key lock. Operating temperature range: +5~ 80°C. INCLUDED: The Yamato IC-603CW General Purpose Incubator with Window 159L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Incu-Shaker 10L Shaking IncubatorFeatures - Exceptional temperature uniformity and accurac (more)y - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration & mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker 10L is a heavy-duty performer, designed for heavy workloads and continuous use. Its outstanding temperature accuracy and uniformity are supported by proprietary heat distribution technology that ensures that temperatures are precisely maintained throughout the chamber. Inconsistencies due to stratification are reduced to negligible levels and the selected temperature is precisely maintained within 0.25%, even in the corners. Features a touch screen control over time, speed, and temperature settings. The powerful brushless induction drive is designed for years of trouble-free service, even under continuous use conditions with heavy loads. Noise and vibration are minimized by an advanced, computer designed motor isolation system. Like other Incu-Shaker models, the 10L is built to last. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker 10L Shaking Incubator includes: - 18 x 18 in Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

Music System - Yamaha RX V1500, Extron MVX, AMX NI-3000, AMX Mini, Jamo D 6SUB This was removed from (more) a university where they were surplus to requirements. 1x Yamaha RX V1500S/N: Y066054VX 1x Extron MVX 84 VGA AS/N: 33-1023-01 REV C 1x AMX NI-3000 Integrated Controller 1x AMX NFX-Mini 1x Universal Open Rack Cabinet with Wheels, black 1x Jamo D 6SUBS/N: 16211050024 All items are in good cosmetic condition and powered on without issue - The control buttons are fully functional and performing as intended.

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Polyscience MX10S135-A11B 10L Stainless Steel Open Bath, MX (Ambient +10 to 135C), 120V, 60HzFeature (more)s - Large, universal icon and English display - On-screen prompts - Single-point calibration capability - Working temperatures from ambient +10° up to 150°C - DuraTop™ insulating, chemical-resistant top deck - Temperature stability of ±0.07°C - Controller displays internal bath temperature, set-point and more–all on one easy to read screen Three control buttons and plain-text on-screen prompts make the setup and operation of the MX Temperature Controller easy and straightforward. Redundant over-temperature protection, high and low temperature limits and alarms alert you instantly to conditions that fall outside normal operating parameters User-settable high-temperature safety provides over-temperature and low liquid level protection. Patented, integrated design protects pump and heater while simplifying cleaning and maintenance. PolyScience Circulating Bath with MX Temperature Controller. It is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features Large, universal icon and English display On-screen prompts Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience MX10S135-A11B 10L Stainless Steel Open Bath, MX (Ambient +10 to 135C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco RapidVap N2/48 Evaporation System with RS-232 LinkRapidVapN2/48 Evaporation Systems use nit (more)rogen blow down, vortex motion and heat tospeed evaporation of up to 48 small samples or eight 450 milliliter samples atonce. A stream of nitrogen or dry gas is directed downward onto the surface ofthe sample. Nitrogen blow down reduces the partial pressure directly over theliquid to speed evaporation and help remove the solvent as it evaporates. TheseSystems may be used to prepare samples for applications such as drug developmentand metabolism, bioresearch, combinatorial chemistry, environmental testing,forensics and toxicology. There are eight clusters of six ports each. Nitrogen may be delivered to 2, 4,6 or 8 clusters at once so that nitrogen is conserved when a full load is notrequired. Microprocessor-controlled vortex motion increases surface area forfaster evaporation while continually mixing the sample to maximize recovery.Utilizing a dry block heating method, RapidVap N2/48 Systems provide a morereliable alternative to maintenance-intensive, contamination-prone water baths.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose (6 ft.) - Clamp - Manifold Guide x 3 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty