Miltenyi Biotec Model CliniMACS Plus Cell Separator Sorter Lab

Cytiva Xuri Cell Expansion System W25 Lab This system was removed from a university lab where it was (more) surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility. The PC has no software but is included as it may have relevant hardware. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU Dell Vostro PC, LG Flatron L1915S Monitor

Cytiva Xuri Cell Expansion System W25 Lab This system was removed from a university lab where it was (more) surplus to requirement. All units are in good cosmetic condition with the Xuri Cell Expansion System W25 base unit powering on. All units have been powered on using test cables required to connect the Cytiva Xuri Cell Expansion W25 Pump and Cytiva Xuri Cell Expansion W25 CBCU. These are test cables and are not included in the listing. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard . There is no software installed. Cytiva Filter Heater

GE Healthcare / Cytiva Xuri Cell Expansion System W25 This system was removed from a university wher (more)e it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software. HP Elite desktop PC - No operating system or software included. We have left the PC with the system in case it has relevant hardware installed. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard. TH Cytiva Filter Heater

GE Healthcare / Cytiva Xuri Cell Expansion System W25 This system was removed from a university wher (more)e it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software. HP Elite desktop PC - No operating system or software included. The PC was left with the system as it may have relevant hardware. This system was Calibrated on 07.12.23 The Xuri Cell Expansion System comprises the following components: Xuri Cell Expansion System W25 main unitSerial No. 2648232. Year 2020 Xuri Cell Expansion System W25 CBCU full unitSerial No. 2635824 Year 2020 Xuri Cell Expansion W25 PumpSerial No. 2644380. Year 2020 Xuri Filter HeaterCode No. 29083659 HP Elitedesk desktop PC with no operating system or softwareSerial No. CZ009CNKH HP Keyboard model KU-1156 HP mousePart No. 672562-001 Lenovo ThinkVision MonitorSerial No. V1BWY98 Netgear 8-port gigabit ethernet switchSerial No. 5UR10650009AB Also included:3 x lengths of pump tubing with connecting ends2 x low voltage power leads1 x Netgear 18v power adapter

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. Serial No. 002599Manufactured April 2022

BioSpherix Xvivo System X2 isolated workstation for cell culture work under controlled conditions. M (more)ultiple incubation chambers, with independent O2/CO2/RH programming. The incubation sub-chambers have doors that open into the area for handling with gloves in an aseptic environment controlled by temperature, O2 and CO2. O2 control from 0.1% to 99.9% is possible in each incubator. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. Heatable interior atmosphere and work surface. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. Control of the O2 level also in the SAS or exchange lock for the input/output of material and samples. Software control on a PC for easy documentation and data logging, even allows remote control. Modular and completely enclosed workstation, without requiring the expulsion or extraction of air. Modular system, can be expanded in the future. The BioSpherix X2 closed incubation system is an attractive cleanroom alternative. With the Xvivo System Model X2, good manufacturing practices are easier to achieve, risk is reduced in many ways, and the speed of implementation is much faster and easier. The Xvivo System X2 model, available through its sister company, Biospherix Medical, is designed to process and produce cells in compliance with regulatory GMPs. The BioSpherix Xvivo System Model X2 is the world's only proven modular cytocentric aseptic containment isolator.

This listing is for 1 of 2 IKA MS 3 Basic Orbital Shaker. The unit is in full working condition and (more) is ready for immidate realese. The IKA MS 3 Basic Orbital Shaker is an efficient and versatile laboratory device designed for a variety of shaking tasks involving small vessels and microtiter plates. Its compact design and robust features make it suitable for both routine laboratory applications and more specialized experiments. Key Features: Orbital Movement: The shaker operates with an orbital motion, characterized by a shaker diameter of 4.5 mm. This design allows for effective mixing of samples within a range of vessel types. Two Operating Modes: Mode A (Safe Mode): In this mode, the shaker detects the type of attachment being used and restricts the speed to a maximum of 1,300 rpm for non-standard attachments, ensuring safety and preventing damage to both samples and the device. Mode B: This mode does not feature attachment detection and allows for higher speeds up to 3,000 rpm, depending on the attachment and application requirements. Touch Operation: The standard attachment enables up to 3,000 rpm in touch mode, providing immediate mixing responses when needed. Stable Shaking: The shaker maintains stable operation across all speed settings, ensuring uniform mixing of solutions and samples without fluctuations that could impact experimental results. Durable Construction: Built with a robust zinc die-cast casing, the MS 3 B promises longevity and reliability in various laboratory environments. Permissible Shaking Weight: The machine can accommodate a maximum shaking weight (including attachments) of 0.5 kg, making it versatile for different laboratory setups. Key Specifications: Type of Movement: Orbital Shaker Diameter: 4.5 mm Permissible Shaking Weight (including attachments): 0.5 kg Operating Modes: Mode A: Safe mode with attachment detection Mode B: Without attachment detection Speed Range: 0 - 3,000 rpm (Limited to 1,300 rpm in Mode A with non-standard attachments)

This Shimazdu UVmini 1240 CE UV-VIS Spectrophotometer was removed from a university lab where it was (more) surplus to requirements. The unit powers up and passes all self-tests. We were unable to carry out further tests at our facility. It is in reasonably good cosmetic condition with marks from use. The printer is in working order and has been tested.

PUE HX5.EX terminal is a constructional component of industrial multifunctional load cell scales. It (more) is the most modern RADWAG solution to be used in areas endangered with explosive atmosphere. The HX5.EX is compliant with ATEX directive regulations. The terminal is intended for operation in environment filled with explosive gases and dust, and can be placed in zones: 1/21 and 2/22. Standard version of the terminal is equipped with 2 serial intrinsically safe RS232 communication interfaces, and with one intrinsically safe RS485 interface. They facilitate communication with equipment predetermined for use in hazardous areas. Possibility to add digital inputs/outputs expands the range of instruments compatible with the terminal by robotic elements compliant with ATEX directive. For more demanding customers, RADWAG has developed IM01.EX module, installed in the safe area, which extends the available connector range by Ethernet, USB, 4-20mA/0-10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables communication between the terminal and external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Models There are 4 different models: PUE HX5.EX-1: 2 × RS232, RS485 - standard design, PUE HX5.EX-2: standard design + 4IN/4OUT, PUE HX5.EX-3: standard design + 4IN, PUE HX5.EX-4: standard design + 4OUT. Mechanical Design The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68 (up to 1.5 m immersion). The terminal features 5" colour LCD, covered with polycarbonate protecting it against shocks, and a membrane keypad. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic intrinsically safe interface connectors are located on the back side of the housing. Stable bracket enables mounting the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Power Supply The PUE HX5.EX terminal can be connected to the mains only with a certified intrinsically safe power supply, manufactured by RADWAG: PM01.EX-1 power supply intended for operation in hazardous area: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2 power supply intended for operation in safe area, equipped with intrinsically safe circuits which may be placed in: zone 1 and 2 where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. zone 21 and 22 where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. IM01.EX Communication Module The terminal’s interface range can be expanded using IM01.EX communication module, connected to the terminal via an intrinsically safe RS485 interface, placed outside the hazardous area. Models: IM01.EX-1 Standard: 2x RS232, USB,4 I/4 O, Ethernet IM01.EX-2 analog output 4-20mA/0-10V IM01.EX-3 12 I/12 O, digital IM01.EX-4 Profibus DP IM01.EX-5 PROFINET IM01.EX-6 CANopen (available soon) IM01.EX-7 DeviceNet (available soon) IM01.EX-8 RS485 IM01.EX: ETHERNET IP (available soon) Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, and percent weighing. Terminal’s information system is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. The interfaces enable communication between the terminal and the accessories intended for operation in the hazardous and non-hazardous areas. Accessories: barcode scanners, printers, external displays, control buttons, light signalling towers and other controlling/signalling devices. The terminal can communicate with systems for automatic process control and superior IT systems.

SCILOGEX SCI550-S LED Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sens (more)or & Sensor StandThe SCILOGEX SCI550-S provides powerful heating and stirring with LED digital display of the set temperature and real-time temperature display. LED heating and analog stirring are simply controlled turning the respective control knobs. Product Features - LED display for precise monitoring of temperature - A wide speed range of 50 to 1500rpm - Heat only, stir only or heat and stir together functions - Max. Heating plate temperature 550°C - Low temperature stability - Electronic speed control for constant speed even during changes in load - External temperature control is possible by connecting the temperature sensor(PT1000) with accuracy at ±0.2°C - High magnetic adhesion - “HOT” warning will flash if the work plate temperature is above 50°C even when the hotplate is turned off Click Here to View Product Video INCLUDED: The SCILOGEX SCI550-S LED Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - PT 1000 Temperature sensor and stand - Two Year Manufacturer's Warranty

Accuris NextPette Pipette Set (10, 20, 200, 1000 ul Pipettes) The Accuris NextPette Pipette Set incl (more)udes variable volume 10, 20, 200, and 1000 ul pipettes with carousel stand.INCLUDED: The Accuris NextPette Pipette Set (10, 20, 200, 1000 ul Pipettes) includes: - NextPette 0.5 to 10ul Pipette - NextPette 2 to 20ul Pipette - NextPette 20 to 200ul Pipette - NextPette 100 to 1000ul Pipette - Carousel Stand - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty