C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

RFM 340 refractometer Scale Refractive Index (RI): 1.33 – 1.54 Scale Sugar °Brix: 0 – 95 Resolution  (more)RI: 0.0001/0.00001 Resolution Sugar °Brix: 0.1/0.01 Accuracy RI: ±0.00003 Accuracy Sugar °Brix: 0.02 Lab circulating refrigerated water bath Temperature range: -20 to 200°C Temperature stability: ±0.03°C Pump capacity: 16 L/min Capacity: 7 litres

Thermo Fisher Scientific NESLAB RTE 7 Circulating Water Bath Refrigerated Lab This item was removed  (more)from a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition.

Polyscience WBE05A11B 5L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz3D Visualization of the P (more)olyscience General Purpose Water BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience WBE05A11B 5L Digital Water Bath is designed to handle a wide range of laboratoryprocedures including: incubation, inactivation and agglutination as well asmost pharmaceutical, serological, biomedical and industrial procedures.To ensure optimium temperature uniformity, your Water Bathfeatures an energy efficient, large-area heater and thermostatic control. ItsPID microprocessor control (Proportional Integral Derivative) system providesproportional heat control by anticipating the approach to your set pointtemperature and preventing overshoot. A redundant safety thermostat is standardon all models.Features Displays actual and set point temperature simultaneously Three push-button pre-sets for frequently used temperatures Integrated timer Hinged gable cover Calibration capability Reservoir sizes from 2 to 28 liters Reservoir made of 304 Stainless Steel Reservoir drain (10 liter and larger baths) Primary and automatic safety thermostats Click Here to View Product Video INCLUDED: The Polyscience WBE05A11B 5L Digital Water Bath (Ambient +5 to 99C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C t (more)o 100°C Heating Capacity 1000W Volume 5L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B5 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo CORIO C-B19 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 19L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B19 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Double Screen Media Unit by Isomi This item was removed from a university lab where it was surplus t (more)o requirement. It is in very good cosmetic condition. The unit features two 32" IR touch screens with built-in PCs. However, only the one screen is operational; the other does not power on and is non-functional. Due to the partial functionality, this media unit is listed for spares or repairs. It has Xibo Client Software installed. Features - 2 x 32" IR touch-screen including PC as standard - Runs on Windows 7 - 1 x Extended USB Port

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

HP 6890 5973 Series G1999A GC-MS Gas Chromatograph Mass Spectrometer System This was removed from a  (more)university lab where it was surplus to requirements. The lab confirmed that it is in good working order. At our facility we have connected the system together and powered it up, but not tested further. It is in good cosmetic condition with minor marks. Included are; HP ALS ready G1530ASerial No. US00028126 HP 5973 Mass Selective DetectorG1999ASerial No.US91430461 HP 59864B Ionisation Gauge ControllerSerial No. US60103518

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features a terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform. The HY10 series scales is made of stainless steel OH18N9 including the weighing platform, and it is equipped with 10,1”colourful touch screen display, keyboard with numeric and function keys. The scales enables cooperation with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series is offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

Scilogex MX-F Vortex Mixer The Scilogex MX-F Vortex Mixer is a fixed-speed vortex mixer which provid (more)es vortexing at 2500 rpm. It features electronic speed control to ensure the same speed is maintained at all times, even during changes of load and features continuous or touch operation. The orbital diameter is 4 mm, providing an effective and efficient vortexing inside the sample. The compact stable design of this mixer makes it a great addition to any laboratory. INCLUDED: The Scilogex MX-F Vortex Mixer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scientific Industries Digital MicroPlate Genie PulseThe Digital MicroPlate Genie Pulse single positi (more)on microplate mixer features aggressive and uniform mixing of single microplates with speeds from 500 RPM to 3000 RPM and a shaking orbit of 1.0mm diameter. The Pulse “ON” and “OFF” times can be set from 0.1 seconds to 99 minutes for a more random motion and thorough mixing. The Digital MicroPlate Genie Pulse digital control and display of speed and time offers reproducibility and accuracy, with true speed display as well as fully programmable RUN/STOP modes. Accepts most microplate types, even in 384-well formats. The Digital MicroPlate Genie Pulse is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 2 Year Parts and Labor Warranty Scientific Industries Digital MicroPlate Genie Pulse Specifications Speed 500-3000 RPM (750 – 2850 RPM for 230V models) Time 0 – 99 minutes or continuous Pulse-ON/OFF 0.1 seconds – 99 minutes Vortexing Orbit 1.0mm diameter Max. Capacity 1 microplate, any type with standard SBS footprint Dimensions (D x W x H) 165 x 165 x 165mm 6.5 x 6.5 x 6.5in Weight 2.75 Kg (6.1 lb)