Life Technologies Ion Torrent PGM Sequencer, One Touch 2, One Touch ES System

This Pyrosequencing PSQ96MA Pyrosequencer was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and the lab believed it was in full working order prior to removal. It was not tested further at our facility. It is in good cosmetic condition but one of the feet has sheared off at the screw. It has some minor marks from use. Included are; Pyrosequencing PSQ96 InstrumentModel - PSQ96MASN - 60-0000 000335 N12Block - 96 x 0.2mlUnit dimensions - L60 W51 H49cm Accessories/consumables:-Pyrosequencing Vacuum Prep Stand (SN - 60-0204 000020 P11)Biotage Pyromark Vacuum Prep Worktable (REF - 60-0237)PSQ96 Reagent Cartridge (2 in box)PSQ96 Reagent Cartridge (3 in box)13 x Vacuum Prep Tool Troughs2 x 96 well tube holdersVacuum Prep Tool Filter ProbesQiagen PyroQ96 IPC Hard drive PCA6781 (Sealed in box)

Ion Torrent Personal Genome Machine  Model - 508-U001 This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is in reasonably good cosmetic condition with marks. Included are; 1 x Model - 508-U00111C082420 Comes with:-Honeywell Barcode Scanner Model - MS9520Bottle StandPhone/Ethernet type cable

Qiagen Pyromark Q96 ID + Vacuum Prep Worktable System Lab This system was removed from a university  (more)where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system comprises the following: Qiagen Pyromark Q96 ID Qiagen PyroMark Vacuum Prep WorktableRef - 60-0237 PyroMark Vacuum Prep ToolRef - 60-0236 PyroMark Q96 IDApplication Software User Manual

Life Technologies Ion Torrent PGM Sequencer, One Touch 2, ES System This was removed from a universi (more)ty lab where it was surplus to requirements. All modules of the system power up but have not been tested further. Included are; Life Technologies Ion OneTouch ES Enrichment System Module S/N - 394314 Life Technologies Ion Torrent OneTouch 2 Instrument Next Generation Sequencing S/N - 2456280-0981Ref - INS1005527 Life Technologies Ion Torrent Personal Genome Machine Ion PGM System.S/N: 11C120503Release: 5.10.0Datacollect version: 489LiveView version: 755Hw8560 version: 134 Firmware version: 53 FPGA version: 81.5.4Script version: 22.0.0OS: 21Graphics: 36TSLink version: 1.0.5Board version: 4 A.1Board serial: 001164Mac Addr: 00:21:73:00:04:8cKernel Build: #50 PREEMPT Fri Nov 5 10:13:40 EDT 2010u-boot Build: U-Boot 1.1.6 (Jan 6 2011 - 16:46:08)Data storage: 1459716 MB free out of 1548190 MB (94% free)

14 x Fylde Transducer Amplifier 379TA Job Lot All items are in good cosmetic condition with minimal  (more)wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. This job lot includes the following: 14 x Fylde Transducer Amplifier 379TA Model: 378TA

This listing is for a New Brunswick Innova U535 Ultra-Low Temp Freezer. The unit is in full working (more) condition and is ready for immidate realese. The New Brunswick Innova U535 Ultra-Low Temperature Freezer is a high-performance laboratory freezer designed for storing sensitive medical and scientific materials at extremely low temperatures. Key features include: Ultimate Low Temperature: -86°C, ensuring precise temperature control and protection of samples from temperature-spiking damage Vacuum Insulation Panel Technology: Provides excellent space and power efficiency, allowing for up to 30% more storage capacity compared to traditionally-insulated lab freezers Cascade Refrigeration: Ensures consistent and reliable temperature performance. 3 Inner Compartments: Allow for organized storage and easy sample retrieval Manual Defrost or Automatic Defrost Options: Cater to different laboratory needs and preferences Technical Specifications Overall capacity: 18.98 cubic feet Power supply: 208/220V/60Hz Dimensions: External height: 1950mm External width: 800mm External depth: 867mm

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 The Thermo Scientific TX-750 Swing Buc (more)ket Rotor, Cat. #: 75003180, is a centrifuge rotor designed for use with the Thermo Scientific ST40/ST40R, XT/XTR/XF/XFR, Megafuge™ 40/40R, Multifuge™ X3/X3R, and Thermo Scientific SL40/40R centrifuges . This rotor has a maximum speed of 4,700 RPM and a maximum relative centrifugal force (RCF) of 4,816 x g. It can accommodate a maximum capacity of up to 4 x 750ml, making it suitable for a range of applications including cell culture work, blood separation, microbiology, genomics and more. INCLUDED: The Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 includes: - Thermo Scientific TX-750 Swing Bucket Rotor - 6 Months Parts and Labor Warranty Thermo Scientific TX-750 Swing Bucket Rotor, Cat. #: 75003180 SpecificationsMaximum Speed4,700 RPMMaximum RCF4,816 x gMaximum Capacity4 x 750mlMaximum Radius19.5 cmMinimum Radius8.3 cmCentrifuge CompatibilityThermo Scientific ST40/ST40R, XT/XTR/XF/XFR, Megafuge™ 40/40R, Multifuge™ X3/X3R, and Thermo Scientific SL40/40R centrifugesDownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote .downloads-section { justify-content: center; }

Labconco Clear CanisterClearPolypropylene Canister with Mounting Bracket, to attach the canister to  (more)theside of the CentriVap Cold Trap. Includes 17" PVC tubing and two clamps.Accommodates any of the following Chemical Trap Inserts: 7814800 Acid Trap,7814900 Moisture Trap, 7815000 Radioisotope Trap, 7815200 Solvent Trap or7995600 Ammonia Trap. Trap Inserts are sold separately.Clearpolypropylene canister allows visual inspection of trap contents. Chemical TrapInsert is required, sold separately. INCLUDED: The Labconco 7460900 Clear Canister includes: - 17" PVC Tubing - Clamps x 2 - Manufacturer's Documentation - 1 Year Manufacturer's Warranty