IKA CBC ROTAVISC lo-vi Viscometer Package

BROOKFIELD DV1 Viscometer with 4 Spindles + UL Adapter Type DV1MLVTJO With 4 Spindle / Spindles type (more) LV : numbers 61/ 62 / 63 / 64 The LV measurement is intended for low viscosity materials and can measure the finest materials. Typical examples include inks, oils and solvents. Viscosity range: 15 – 2,000,000 mPa*s/cP Speed: 0.3 – 100 rpm Number of increments: 18 Torque measurement accuracy: 1% of full scale range Repeatability: 0.2% of full scale range Number of spindles: 4 Power supply: 220 V, 50-60 Hz Tested at 1000 centipoise With base (stand) Year of manufacture: 2017

This Lamy Rheology Rheomat   Model - RM 100 Viscometer was removed from a university lab where  (more)it was surplus to requirements. We were unable to power it us as we did not have the correct power supply. It is in reasonably good cosmetic condition with some marks from use.

This Viscotek TDA 302 Triple Detector Array was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and the screen works. It is in good cosmetic condition with minor marks.

Viscotek TDA 305 Triple Detector Array This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and the screen is working. It is in good cosmetic condition with minor marks.

IKA ROTAVISC lo-vi HELI Complete Viscometer Speed Range 0.01 - 200 rpm Setting Accuracy Speed 0.01  (more)±rpm Time Setting Range 0.017 - 6000 min Features - Measures low-viscosity liquids in various settings, from labs to quality control. - Includes spindle set, protective bracket, temperature sensor, and HELISTAND with T-spindle. - 4.3″ TFT display for intuitive menu navigation and digital spirit level for setup. - Accuracy: +/- 1% deviation and +/- 0.2% reproducibility for diverse fluids. - Offers stepless speed adjustment for enhanced measurement versatility. - Motorized HELISTAND for dynamic, precise viscosity measurement. Regardless of a simple or demanding viscosity measurement - IKA ROTAVISC lo-vi HELI Complete determines the viscosity of low-viscosity liquids in all areas of application ranging from the laboratory to quality control. The scope of delivery includes a standard spindle set (SP 1-SP 4), a protective bracket, temperature sensor and HELISTAND stand incl. T-spindle set. The generous 4.3″ TFT display allows for an intuitive menuguidance. A digital spirit level also supports the correct set-up of thestart-up condition. The simple ramp function simplifies repetitive tasks. Thelevel of measurement accuracy of the ROTAVISC rotational viscometer for bothNewtonian and non-Newtonian fluids is +/- 1 % of the measuring range. Thereproducibility is +/- 0.2 %. ROTAVISC is a viscometer, which offers steplessspeed adjustment. The motorized IKA HELISTAND moves the mounted viscometer andits rotating body slowly and uniformly up and down in the sample. Viscositymeasuring range: 15 - 6.000.000 mPas. Click Here to View Product Video INCLUDED: The IKA ROTAVISC lo-vi HELI Complete Viscometer includes: - Standard Spindle Set - Protective Bracket - Temperature Sensor - HELISTAND - T-Spindle Set - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Speeds: Choice of 3 options. Standalone interleaved: LV/RV (18 speeds) 8 LV speeds followed by 10 RV (more) speeds Standalone sequential: LV/RV (18 speeds) 8 LV speeds and 10 RV speeds arranged in sequential order from lowest 0.3 rpm to highest 100 rpm. Standalone custom: 54 speeds, user selectable External (PC Control): 0.01 – 200 rpm (0.01 rpm increments from 0.01 to 0.99 rpm, 0.1 rpm increments from 1.0 to 200 rpm) Temperature sensing range: -100˚C to 300˚C Viscosity range: 100 – 40000000 cP Viscosity accuracy: ±1.0% of full scale range Viscosity repeatability: ±0.2% of Full Scale Range Temperature Accuracy: ±1°C (-100°C to +149°C), ±2°C (+150°C to +300°C)

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

This Sanyo Versatile Environmental Test Chamber Model - MLR-351H was removed from a university  (more)lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer(not included). The water tank for humidity operation is missing from this unit, therefore it is listed as Spares/Repair. The temperature was first set to 37˚c, when reached, the thermometer read 38.8˚cThe temperature was then set to the maximum temp of 50˚c, when reached, the thermometer read 52.2˚cFinally, the temperature was set to the minimum of 0˚c, when dropped to, the thermometer read 3.1˚c. Inside dimensions - D47 W50 H123cm1 Shelf - 41 x 49cm It is in reasonably good cosmetic condition with marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

KNF N938.50KT.18 IP20-T Diaphragm Pump Ultimate Vacuum 15 mbar (abs.) Maximum Flow Rate 30L/min (1. (more)8 m3/h) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Compact, quiet and reliable - Small footprint - Maintenance-free The KNFN938.50KT.18 IP20-T Diaphragm Pump is a double-head, dry-running devices usedin a wide range of laboratory applications. It transfers and pumps down withoutcontamination. The pump is equipped with parallel and series connection for thepump heads - resulting in a high pneumatic performance, a durable product andcompact size. Special valves ensure that the product can cope easily withvapour and condensation.INCLUDED: The KNF N938.50KT.18 IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RW 20 Digital Mechanical Overhead Stirrer Speed Range 60 to 2,000 RPM Viscosity Max. 10,000 mPas (more) Stirring Quantity Max. 20 l Features - With digital display - Robust, slimline, ergonomic design - Technical improvements on the trusted RW 20 series designs - With constant power-drive - Two speed ranges for universal use from 60 - 2.000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 l (H2O) The RW 20 Digital Stirrer is designed with a robust, slimline, ergonomic design and features a digital display. It incorporates technical improvements on the trusted RW 20 series designs and offers a constant power-drive. The stirrer has two speed ranges for universal use, from 60 - 2000 rpm, and push-through agitator shafts (only when stationary). It is capable of stirring quantities up to 20 liters (H2O) with a maximum motor rating input of 85 W and output of 35 W. The device includes an LED speed display and stepless speed control, with a maximum viscosity of 10000 mPas and a nominal torque of 1.5 Nm. The stirring element is fastened by a chuck, and the device features a mechanical speed control with an accuracy of ±1 rpm. The RW 20 Digital Stirrer has dimensions of 88 x 294 x 212 mm and weighs 3.1 kg.

Benchmark MC-24 High Speed Microcentrifuge w/ COMBI-Rotor Benchmark’s MC-24 Touch is the first micro (more)centrifuge in its class to feature touch screen control. In addition to the next generation control panel, the centrifuge also offers high speed (up to 13,500 rpm/16,800 x g) and a unique COMBI-Rotor that accepts both standard microtubes (1.5/2.0ml) and PCR tubes/strips (0.2ml), making this the perfect partner for any molecular biology laboratory. The large color touch screen shows actual speed (in rpm or rcf) along with set and remaining time. Up to 9 speed/time profiles can be stored in memory and the home screen displays a “mySpin” icon for instant recalls a designated favorite profile. Supplied with Benchmark’s unique COMBI-Rotor, the MC-24 Touch will accept 24 x 1.5/2.0ml tubes and 2 strips of 0.2ml tubes (16 x 0.2ml) without requiring separate adapters. Samples are kept cool, even during extended runs at the maximum speed setting by a proprietary air flow system that moves air evenly and quietly throughout the chamber. Click Here to View Product Video INCLUDED: The Benchmark MC-24 High Speed Microcentrifuge w/ COMBI-Rotor includes: - 24 place COMBI-Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty