HACH LANGE 2100AN IS Turbidimeter

Varian Saturn 2000/2000R Mass Spectrometer This item was removed from a university laboratory where  (more)it was surplus to requirements. The mass spectrometer is in reasonably good cosmetic condition but has not been powered on, as it failed PAT testing on visual inspection. The kettle lead port is damaged and will require repair before the unit can be safely used. As we are unable to power it on, we cannot determine any internal damage that may be present. Due to its current condition, this item is being sold as-is for spares or repairs.

Foss Tecator FIAstar 5000 Analyzer This item was removed from a university lab where it was surplus  (more)to requirements. The analyser powers on and is in reasonably good cosmetic condition with some wear. The peristaltic pump operates as intended. Specifications: - Model: FIAstar 5000 Analyzer - Serial No.: 345600104 - Part No.: 10009732 Includes: - Mascot Power Supply (Type: 9320)

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

BrandTech Scientific Titrette Bottletop Burette, 10mL w/ RS232 Interface Nominal Volume 10 ml Partia (more)l Volumes 10, 5, and 1 ml Accuracy (10 mL Nominal Volume) ± 10 ul Features - Operates within Class A error limits for glass burettes, meeting DIN EN ISO 385 and ASTM 287 standards - Digital display ensures clear and precise volume readings, reducing reading errors - Microliter precision allows drop-by-drop titration with drop sizes as small as 20 uL - Automatic detection between filling and titration eliminates manual switching and reduces handling errors - Large, easy-grip hand wheels and optimized gear ratio for fast filling and sensitive dispensing - Easy Calibration technology enables quick, tool-free calibration adjustments - Optional RS232 interface allows seamless data transfer to a PC for GLP-compliant documentation - Lightweight, compact design for portability and stability without external power requirements The BrandTech Scientific Titrette Bottletop Burette, 10mL with RS232 Interface, is designed for precise and efficient titration directly from the bottle. It operates within Class A error limits for glass burettes, complying with DIN EN ISO 385 and ASTM 287 standards. The digital display ensures accurate and clear volume readings, eliminating common reading errors and enhancing process reliability. Its microliter precision allows for drop-by-drop titration, delivering high accuracy with drop sizes as small as 20 uL. The Titrette features automatic detection between filling and titration, removing the need for manual switching and reducing handling errors. Its large, easy-grip hand wheels and optimized gear ratio enable fast filling and sensitive liquid dispensing. The horizontally and vertically adjustable titration tube offers flexibility in positioning, making it ideal for use with magnetic stirrers or various bottle sizes. Equipped with Easy Calibration technology, the Titrette allows for quick and tool-free calibration adjustments. The burette is constructed from high-quality materials ensuring durability and chemical resistance. An amber inspection window protects light-sensitive media, and the optional RS232 interface enables seamless data transfer to a PC, supporting GLP compliance by eliminating transcription errors. Lightweight and compact, the Titrette is highly portable and stable, requiring no external power connection. It can be easily disassembled for cleaning, maintenance, and battery replacement, making it a practical and reliable choice for precision titration in any laboratory setting.Click Here to View Product Video INCLUDED: The BrandTech Scientific Titrette Bottletop Burette, 10mL w/ RS232 Interface includes: - Titrette Bottle-Top Burette, for GL 45 Threaded Bottles - 170 - 330 mm Telescoping Filling Tube - Recirculation Tube - 2 Batteries (AAA/UM4/LR03) - 3 PP Bottle Adapters (GL 32, S 40, NS 29/32) - 2 Amber Colored Light Shield Inspection Windows - 2 m Interface Cable - CD (Driver Software and Open RS232 Communication Protocol) - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eco Chemie BV Metrohm Autolab SPR Biosensor Instrument with Software & Manual This was removed  (more)from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further. The instrument is supplied with the manual and software. It is in good cosmetic condition with minor marks from use.

Macherey Nagel PF-11 photometer. Portable photometer for field and laboratory use. For the evaluatio (more)n of VISOCOLOR and VISOCOLOR ECO kits and tests in NANOCOLOR cuvettes. Direct reading in mg/L. Extinction measurement. Cuvette lock for 16 mm round tubes. Easy to use. Photometric pH measurement. Manual wavelength adjustment: 380/405/470/520/605/720 nm. Light source: Tungsten lamp. Powered by four batteries. Suitcase. User manual. The Macherey Nagel PF-11 photometer is designed and built to provide accurate and reliable results. It is recognized and appreciated by experienced analysts who appreciate its easy-to-use and time-saving approach with step-by-step instructions.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

BrandTech Scientific Transferpette S Midi Pipette Starter Kit, 2 to 1000ul Adjustable or Fixed Volum (more)e Adjustable Pipette Models Included D-20, D-200, & D-1000 Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - Slim shaft design allows easy access to narrow tubes, including conical centrifuge tubes - Fully autoclavable at 121°C for easy sterilization and contamination prevention - High chemical and UV resistance for long-lasting durability in demanding lab environments The BrandTech Scientific Transferpette S Midi Pipette Starter Kit, 2 to 1000ul delivers precise, ergonomic, and efficient pipetting for a wide range of laboratory applications. This adjustable air displacement pipette set includes models D-20 (2 to 20 ul), D-200 (20 to 200 ul), and D-1000 (100 to 1000 ul), providing versatility for various liquid handling tasks. Designed for comfort and performance, the Transferpette S features an ergonomic grip that fits comfortably in any hand, reducing fatigue during extended pipetting sessions. Its true one-handed operation allows for effortless volume adjustment, pipetting, and tip ejection without changing grip, enhancing workflow efficiency. The integrated volume-change protection prevents accidental adjustments, ensuring consistent, reliable results. Easy Calibration technology allows for quick, tool-free calibration to maintain long-term accuracy. The slim shaft design enables easy access to narrow vessels like conical centrifuge tubes, while high chemical and UV resistance ensures durability in demanding lab environments. The Transferpette S Midi Pipette Starter Kit is the ideal solution for laboratories seeking precision, flexibility, and user-friendly operation.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S Midi Pipette Starter Kit, 2 to 1000ul includes: - 3 Pipettes (D-20, D-200, & D-1000) - 3 x TipBox (2 x 2 to 200 ul, 1 x 50 to 1000 ul) - 3 Rack Mounts - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Huber Pilot One Ministat 230 Refrigerated Heating Bath Circulator This was removed from a universit (more)y lab where it was surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

The AK-5/100 STENT automatic balance for stents operates with the readability of d = 0.1 μg. The  (more)device features a special working mode which makes it possible to analyse the change in sample mass during the technological process. Automatic Operation Automation of the weighing cycle, thanks to the elimination of an error being a result of the human factor, is a guarantee of measurement repeatability and accuracy impossible to be obtained in the case of manual weighing. Stent Container Automatic balance for stents, the AK-5/100 STENT, enables users to create identical test conditions for the entire stent series. With use of the stent container, the user can weight a series of 5 stents maximum, one by one, thus the necessity to place one stent on the pan each time is avoided. Accessories for Stent Weighing Weighing pan of custom design allows convenient weighing of 40 mm stents with a diameter of even 20 mm. A special applicator facilitates stent loading. Spacious Chamber and Ease of Operation In the weighing chamber there are perfect conditions necessary to enable highly precise weighing. The spacious chamber makes loading of the weighing pan with stents comfortable and uncomplicated. Measurement of Ambient Conditions in the Weighing Chamber The automatic balance for stent weighing, AK-5/100 STENT, is equipped with a high-class thermo-hygro-barometer allowing to test ambient conditions in real time with the accuracy of: ± 1 hPa (pressure) / ± 1.8% (humidity) / ± 0.1 °C (temperature).

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.