Eppendorf 5333 MasterCycler

Block: Gold anodized 96 well block Maximum Heating Rate: 3.5°C/sec Maximum Cooling Rate: 2.5°C/sec A (more)vg Heating Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity at 55°C: ± 0.2°C within 15 sec Temperature Uniformity at 70 °C: ± 0.3°C within 15 sec Temperature Uniformity at 95 °C: ± 0.6°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range: 20 to 99°C Control Accuracy: ± 0.1°C Programming: Easy spreadsheet programming Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Heated Lid: High Performance Smart Lid (HPSL) Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13 kg

Corbett CAS1200 Automated PCR Setup Robotic Precision Liquid Handling System This was removed f (more)rom a university lab where it was surplus to requirements. The system powers up and connects to the included Robotics 4 software. It has been tested to home the tip loader. The UV and fan functions also work. It is in good cosmetic condition with marks from use. The system consists of: 1 x CAS1200 RobotSN - A080821 1 x Dell Optiplex 380 with Monitor, Keyboard & Mouse.Has a fresh copy of Windows XP installed and Corbett Robotics 4 software.All leads needed are included.

Accuris PR2121-H-1000 qMAX Probe One-Step RT-qPCR Kit, High Rox, 1000 Reactions qMAX Probe One Step  (more)Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. INCLUDED: The Accuris PR2121-H-1000 qMAX Probe One-Step RT-qPCR Kit, High Rox, 1000 Reactions includes: - Includes 10x1ml reaction mix, 10x100µl RTase - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

COMBISTORAGE 3 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 stainless steel shelves - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

Max Temperature: 300°C Temperature Accuracy: Ambient temp….300°C: ±0.5°C & 200 … 300°C: ±0.5° to ±0. (more)8°C (linear increase) Temperature Resolution: 0.1°C Heat-Up Time: 50 to 300°C in 3 minutes (0.1 to 10°C per minute)

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: flat polygonal sheet Nominal value: 20 mg Material: nickel silver F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Ohaus 30400134 Thermal Block for 9 x 5 mL Eppendorf Tubes The Ohaus 30400134 Thermal Block for 9 x 5 (more) mL Eppendorf Tubes is crafted from Valox 357 Plastic for durability. This block is compatible with all Ohaus ISTH Series Thermal Shakers, and has a well depth of 1.93 in. INCLUDED: The Ohaus 30400134 Thermal Block for 9 x 5 mL Eppendorf Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 1493 Concentric Ring Bath, 4 place, 115VThe Boekel Scientific 1493 Concentric Ring (more) Bath, 4 place, 115V, features adjustable water bath openings and heavy-duty 3" legs permanently attached to the body. It has removable concentric rings to suit most laboratory containers and analog temperature control with high and low power modes. The bath offers two power settings: one for rapid heat-up and another for reduced power consumption. It requires no wiring or assembly, is fabricated from stainless steel for a long service life, and comes supplied with a water level regulator and ring sets. The bath is complete and ready to use—just add water and plug in. Applications include solvent extraction, melting solids, evaporating liquids, analysis of total dissolved solids, KD concentration, drying of wastewater sludge, chemical reactions like saponification, QC departments, melting bases in crucibles, and solids testing.INCLUDED: The Boekel Scientific 1493 Concentric Ring Bath, 4 place, 115V includes: - Ring Sets - Water Level Regulator - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty