Varian Cary 300 Bio Uv-Vis Spectrophotometer with Sample Preparation System SPS 3

Jenway 6705 UV/Vis. Spectrophotometer Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition other than some stress cracks present on the screen protector. This does not impair its functionality. This item powers on and passes all self-diagnostic tests on start-up. The previous client stated it was in good working order prior to removal.

Jenway 7315 Spectrophotometer This item was removed from a university where it was surplus to requir (more)ement. This item is in good cosmetic condition and powered on, however, the item was displaying error 8 (see below): Therefore we are unable to test further. "Err 8 Warning: Redo Unable to find Vane on Turret This error indicates that the vane position zero on the turret cannot be found. The most likely causes for this error are: 1. The turret carousel has been removed and not replaced. Solution: Check if the turret is in the sample chamber and inserted properly. Press the key adjacent to the back icon to try rechecking." It is sold for spares/repairs

This listing is for a Beckman Coulter DU 800 UV-Vis spectrophotometer. The unit is in full working  (more)condition and is ready for immediate release. The Beckman Coulter DU 800 UV-Vis Spectrophotometer is a versatile and high-performance instrument designed to meet the needs of a variety of scientific applications, including complex analyses as well as routine measurements. Its capability to operate across a broad wavelength range makes it a valuable asset in fields such as life sciences, biotechnology, academia, and pharmaceuticals. Key Features: Wide Wavelength Range: The DU 800 operates efficiently between 190 to 1100 nm, accommodating a broad spectrum of applications in UV-Vis spectroscopy. Narrow Bandwidth: With a bandwidth of ≤ 1.8 nm, it offers high-resolution measurements, crucial for accurate qualitative and quantitative analyses. Focused Micro-Beam Design: This innovative design results in a wide linear range and improved performance, particularly beneficial when working with small volume samples or precious materials. Enhanced User Experience: The integrated interface improves usability, allowing for immediate access to system functions and continuous display of status and method parameters, ensuring users can monitor their assays effectively. Efficiency Boosting Schedulers: The inclusion of a source scheduler automatically switches between UV and visible lamps at designated times, enhancing the efficiency of the instrument during long-term operations. Technical Specifications: Dimensions: 69 cm (27 inches) width x 53 cm (21 inches) height x 26 cm (10 inches) depth, making it a compact solution for lab environments. Weight: Weighs 37 kg (81 pounds), providing a solid and robust build suitable for laboratory use. Line Voltage: Compatible with a range of 110 – 240V +10%, allowing for global use without the need for voltage converters. Frequency: Operates at standard frequencies of 50/60 Hz. Power Consumption: Typical power usage is 200 watts, making it relatively energy efficient. Operating Temperature Range: Can function optimally in a temperature range of +15 to 40°C (59 to 104°F). Humidity Requirements: Maximum relative humidity of < 85%, not to exceed 32.5°C WBT, ensuring device longevity and performance stability. Benefits: Versatile Applications: The DU 800 is capable of handling a diverse range of applications, from routine quality control to research and development tasks in laboratories. Precision and Reliability: Its advanced optics and design ensure precise and reliable measurements, making it ideal for quantitative analyses in various scientific disciplines. User-Friendly Design: The intuitive user interface contributes to ease of operation, reducing the learning curve for new users, while providing seasoned researchers with efficient access to controls. Cost-Effective: Designed for longevity and reliability, the DU 800 is an investment that can enhance laboratory productivity without exorbitant running costs.

Unicam Helios Alpha Spectrophotometer Lab This item was removed from a university where it was surpl (more)us to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. There is a small black line running across the screen This item details are as follows: Instrument Hours: 7725Type: Helios AlphaNC: 9423 UVA 1002ES/N: UVA 081205

MARSHALL Select MS-SP325-1000 Spectrophotometer, 325-1,100nm Wavelength Range 325 to 1,000nm Wavelen (more)gth Accuracy ± 1.8nm Sample Compartment 4 position, 10mm pathlength cuvette Features - Equipped with both Tungsten and Deuterium lamps, covering a wavelength range of 325 to 1,000 nm - Designed to significantly reduce stray light for more precise measurements - Streamlines setup and operation with automatic wavelength and light source adjustments - Tracks the performance and lifespan of both lamp types to ensure optimal functionality - Can store up to 200 different programs - LCD screen for straightforward navigation and status updates - Maintains stability with minimal noise and error, ensuring reliable results The MARSHALL Select MS-SP325-1000 Spectrophotometer, an advanced analytical instrument meticulously designed for extensive use in industries such as agriculture, geology, metallurgy, and environmental sciences. This single-beam spectrophotometer, equipped with both a Tungsten lamp and a Deuterium lamp, operates within a wavelength range of 325 to 1,000 nm, offering precision and versatility for a variety of quantitative and qualitative research tasks. The spectrophotometer excels in studies related to the concentration of nucleic acids, proteins, and bacteria, benefiting from its high-class grating and hermetically sealed light path which significantly reduce stray light, thereby enhancing measurement accuracy. The MS-SP325-1000 is not only powerful but also user-friendly and safe, featuring an imported and environmentally friendly Deuterium lamp that minimizes ozone inhalation. With real-time lamp monitoring, automatic wavelength calibration, and an SiO2 coated optical mirror to diminish external light interference, this device ensures reliable and precise operation. Its robust construction is complemented by a simple, elegant design with an easy-to-read LCD display. Capable of storing up to 200 programs, the MS-SP325-1000 facilitates efficient and effective workflow management, making it a critical tool for quality control in analytical testing across various sectors. Whether for medical laboratories, educational settings, or industrial applications, this spectrophotometer stands out as a requisite instrument for any conventional laboratory. INCLUDED: The MARSHALL Select MS-SP325-1000 Spectrophotometer, 325-1,100nm includes: - Tungsten Lamp - Deuterium lamp - 4 Place Cuvette Holder - 4 x 3.5ml Glass Square Cuvettes - 2 x 3.5ml Quartz Square Cuvettes - Dust Cover - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Spectral range (190 – 850 nm) for measuring a variety of samples types: Peptides (205 nm), DNA and R (more)NA (260 nm), Purified protein (280 nm), Toxicology assays and industrial dyes (490 nm), Gold nanoparticles (520 nm), Colorimetric protein assays (BCA 562 nm, Bradford 595 nm, Modified Lowry 650 nm, Pierce 660 660 nm), Optical Density measurements (600 nm) Light Source: Xenon Flash Wavelength Accuracy: ±1 nm Spectral Bandwidth: ≤1.8 nm (FWHM at Hg 254 nm) Pathlength: 0.030 to 1.0 mm (auto-ranging) Photometric Accuracy: 3% at 0.97 A, 302 nm, (Absorbance expressed at Abs/mm at 25°C) Photometric Range:  0–550 A Repeatability Typical: 0.002 A (1.0 mm path) or 1%CV, whichever is greater (SD of 10 individual measurements at 0.97 A) Sample Volume: Minimum 1μL Measurement Time: 8 seconds Detection Range: dsDNA 2.0 ng/μL, BSA (IgG) 0.06 (0.03) mg/mL Detector Type: 2048-element CMOS Linear Image Sensor Display: 7 in. High Definition Color Display, 1280 x 800 pixels For Use With (Application): Nucleic Acid A260, A260/A280, A260/A230 and Labeled Nucleic Acids;, Protein A280 and A205, Protein Pierce 660, Protein Bradford, Protein BCA, Protein Lowry, Labeled Proteins, OD600, Kinetics, UV-Vis, and Custom Methods Dimensions (DxWxH): 200 x 254 x 323 mm Weight: 3.6 kg

Julabo CORIO CP-BC4 Heating Circulator, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C (more) - 200°C Heating Capacity 1000W Fluid Type Water, Silicone Features - Models for internal and external applications - Bright, white, easy to read display - Very quiet - Easy pump change-over between internal and external circulation - USB &amp; RS232 connection - High-quality bath tanks made of stainless steel with bath lid and drain tap - Integrated cooling coil for counter-cooling CORIO™ CP heating circulators are suitable for temperature applications to 200 °C with circulation to an external apparatus or immersing a device in the bath tank. The CORIO™ CP circulator incorporates easy change-over for control of fluid circulation internally or externally.Pump inlet/outlet fittings M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. Systems include insulated stainless-steel tanks with integrated cooling coil and drain ports. Bright LED display with easy to use interface including USB and RS232 connections for external PC control and data-logging. PID temperature control provides ±0.02 °C stability. Adjustable centrifugal pump capacity of 8-27 L/min with pressure from 1.5-10.2 psiClass III (FL) according to DIN 12876-1INCLUDED: The Julabo CORIO CP-BC4 Heating Circulator, 115V/50-60Hz (NRTL Certified) includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Bath Lid - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 9000520 WaterPro PS Polishing Station, 115V, 60HzFeatures - Timed dispense for unattended  (more)operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000520 WaterPro PS Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus 30314829 10 x 50ml Fixed Angle Rotor The Ohaus 30314829 10 x 50ml Fixed Angle Rotor accommodat (more)es a capacity of up to 10 x 50ml. This rotor is designed for use with Ohaus , FC5718, FC5718R, FC5816, FC5816R, FC5916, and FC5916R series centrifuges, and reaches speeds up to 10,500 RPM with a maximum RCF of 16,022 x g. INCLUDED: The Ohaus 30314829 10 x 50ml Fixed Angle Rotor includes: - Ohaus 30314829 10 x 50ml Fixed Angle Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Centrifuge FC5513-K, Frontier™ 5000 Ohaus, with rotor Designed to be comfortable and practical, Fron (more)tier Micro centrifuges feature an intuitive control interface that is easy to operate even when wearing gloves. Micro centrifuges save valuable bench space by integrating all of their functionality into a small footprint. Frontier Micro centrifuges offer high-speed operation for a range of essential laboratory applications, such as DNA/RNA preparation, ultrafiltration and more. Additionally, biocontainment rotors allow for research with hazardous samples. The equipment is completed by a silent brushless motor, high sample productivity, multi-safety control, customized programs. Included in the FC5513-K model you will get the angle rotor with maximum capacity of 24 x 1.5 / 2.0ml. Features: Maximum relative centrifugal force (x g) at 17,317 g; maximum speed 13,500 rpm; tube diameter without adapter 12mm / 2.0ml, 1.5ml; outer/inner radius 85 mm; 45° angle. You can go into product detail by listening to the Ohaus centrifugation podcast. In this episode, Peter Will, product manager for laboratory equipment at OHAUS, discusses centrifugation and centrifuge safety. ELEGANT AND PRACTICAL DESIGN - Simple and modern interface, to set parameters easily - The display shows both the set and real parameters - Clear and right display STRUCTURE AND FUNCTIONALITY - The panel is splash proof to protect the centrifuge from accidental sample spills - The maintenance-free induction motor produces G-force max. of 17317×g - Speed ​​up to 13500 rpm in less than 15 seconds (with microtubes) - 10 acceleration/deceleration settings - 99 memory sets for quick storage and easy recall of used parameters - Rotor imbalance detection systems shut down the unit when loads are out of balance TECHNICAL FEATURES Speed ​​range: 200 rpm - 13,500 rpm Maximum relative centrifugal force: 17,317 g Maximum flow rate (rotor): 24 x 1.5 / 2.0ml Program memories: 99 Rotor Packaging: Angled Rotor: 24 x 1.5 / 2.0ml Acceleration gear: 10 Deceleration gear: 10 Lid lock: mechanical Noise level: ≤60 ± 2 dB (A) Pre-refrigeration time: not applicable Rotor Compatibility: Angled 24 x 1.5ml / 2.0ml; angled 24 x 1.5ml / 2.0ml sealable; Hematocrit rotor, 24 x capillaries; corner 18x2ml spin columns Rotor recognition method: manual Execution time: quick rotation; 10 seconds to 99 hours 59 minutes 59 seconds; Continuous Safety certification: CE; FCC