Zebra S4M Thermal Label Printer

Airwolf 3D NW3D HDX 3-D Printer Lab This item was removed from a university where it was surplus to  (more)requirement. The back panel is missing and, the wires are exposed, resulting in a visual PAT fail. Due to the condition stated above, this item is listed as Spares/Repair. Also included are the following: - Power lead - Data cable

Print resolution: 203 dots/inch, 8 dots/mm or 300 dots/inch, 12 dots/mm Dot size (WxL): 203 dpi – 0. (more)110 x 0.132 mm, 300 dpi – 0.110 x 0.132 mm Maximum print width: 203 dpi – 108 mm, 300 dpi – 105.7 mm Bar code modulus: 203 dpi – 5 mil to 50 mil, 300 dpi – 3.3 mil to 33 mil Programmable constant print speeds: 51, 76, 102, 127 and 152 mm/s Media label length: Minimum (tear off) – 17.8 mm, Minimum (peel off) – 12.7 mm, Maximum – 991 mm Media label width: Minimum – 19 mm, Maximum – 114 mm Media total thickness (including liner, if any): Minimum – 0.076 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm, 25 mm core – 152 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3.18 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m Ribbon core inside diameter: 25 mm Dimensions (HxWxD): 277 x 242 x 432 mm Weight: 9.1 kg

The BioXp 3200 system advanced gene assembly techniquesenable scientists to rapidly develop syntheti (more)c genomes and genome parts for research and development activities. The BioXp 3200 System is designed to rapidly synthesize high-quality, linear DNA fragments from custom designed oligonucleotide pools and reagents across a meaningful section of the complexity continuum. A capacity of 32 DNA fragments (Tiles), ranging in size from 350 bp to 1.8 kb, can be assembled with high fidelity. DNA fragments synthesized by the BioXp 3200 System are ready for off-line sequencing QC, further assembly into larger fragments, cloning into vectors with compatible ends and other common downstream applications. BioXp Tiles size range: 350 – 1800 bp BioXp Degenerate Library Tiles size range: 300 – 800 bp (recommended) BioXp Clones size range: 350 – 1800 bp BioXp Tiles GC% complexity: 20 – 70% GC (350 bp – 1.0 kb), 40 – 60% GC (350 bp – 1.8 kb) BioXp Degenerate Library Tiles GC% complexity: 20 – 70% (within recommended size range) BioXp Clones GC% complexity: 20 – 70% GC (350 bp – 1.0 kb), 40 – 60% GC (350 bp – 1.8 kb) BioXp Tiles composition: A, T, C or G residue BioXp Degenerate Library Tiles composition: IUPAC code residues BioXp Clones composition: A, T, C or G residue BioXp Tiles yield: >200 ng of purified, linear dsDNA in 45 µL TE Buffer BioXp Degenerate Library Tiles yield: >200 ng of purified, linear dsDNA library in 45 µL TE Buffer BioXp Clones yield: ~ 20 µL of cloned product  (± 2 µL) and ~ 40 µL of uncloned Tiles (± 2 µL) BioXp Tiles format: 1 to 32 reactions in a 96-well plate format BioXp Degenerate Library Tiles format: 1 to 32 reactions in a 96-well plate format BioXp Clones format: 1 to 32 reactions in a 96-well plate format Dimensions (WxHxD): 660 x 530 x 740 mm Weight: 63.4 kg

RS 232 cable: scale (terminal PUE C/41H, PUE HY, PUE 5) - Epson printer. Cable length: 5 m Optional  (more)cable length: 2 m, 10 m. Compatible with: Scales with PUE C41H terminal Scales with PUE HY terminal Scales with PUE 5.15 (PUE 5.19) terminal Terminal PUE C41H Terminal PUE 5.15 (PUE 5.19) Terminal PUE HY

ZEBRA GX420T Label Printer Zebra GX420T Desktop Thermal Label Printer Features: Technology: Thermal  (more)Transfer Resolution: 203 dpi Media Width: 108 mm Speed: 152 mm/s max With software With some rolls of labels

This listing is for a Powervar UPM UPS Power Supply . The unit is in full working condition and is  (more)ready for immediate release. The Powervar UPM UPS is a power conditioned, sine-wave uninterruptible power supply designed to provide clean, conditioned power free from noise, voltage spikes, and common-mode disturbances. Key Features: Power Rating: The Powervar UPM UPS has a power rating of 1440VA/1296 Watts. Inverter Waveform: The UPS produces a low distortion sine wave output. Transfer Time: The transfer time is 4 ms. Frequency: The typical frequency is 60 Hz. Efficiency: The online efficiency (without charger) is 91%. BTU/Hr: The UPS has a BTU/Hr rating of 459. THD: The total harmonic distortion (THD) with 100% resistive load is not specified. Protection Features: Surge Diverter: The UPS is equipped with a surge diverter to protect against high-voltage surges. Noise Filter: The UPS has a built-in noise filter to reduce electromagnetic interference (EMI). Low-Impedance Isolation Transformer: The UPS features a low-impedance isolation transformer to provide fully conditioned isolated power. Ground Guard Technology: The UPS is designed with Ground Guard technology to prevent ground loops and eliminate the need for special dedicated-isolated electrical circuits.

This listing is for a FisherBrand Bead Mill 24 Homogeniser.`This unit its missing a front plate.The  (more)unit is ready for immediate release.The FisherBrand Bead Mill 24 Homogeniser is an innovative solution for rapid and efficient sample homogenisation, capable of processing up to 24 x 2 mL or 0.5 mL tubes simultaneously. Perfect for laboratories looking to streamline their workflows, this homogeniser ensures more samples can be processed in a shorter amount of time, making it an essential tool for DNA/RNA extraction, tissue homogenisation, and protein purification.Key Benefits:High Throughput: Process 24 samples at once, maximising productivity without compromising quality.User-Friendly Design: The convenient front-loading tube holder allows for easy access and optimal interaction between beads and samples, ensuring thorough homogenisation.Stable Holder: Includes a 24-place tube carriage and Bead Mill Finger Plate that securely holds 2 mL tubes in place, preventing movement during processing.No Downtime: Enjoy non-stop operation with no cool-down required between runs, allowing for continuous processing and eliminating delays.Cross-Contamination Prevention: The use of disposable tubes significantly reduces the risk of cross-contamination, maintaining sample integrity.Compact Footprint: Designed to maximise bench space, the Bead Mill 24 occupies a smaller area without sacrificing performance.Specifications:Run Time: 1 to 99 secondsPerformance Range: 0.8 m/s to 6 m/s, adjustable in increments of 1.5 m/sNumber of Cycles: 1-9Dimensions: 17 x 15 x 13 in. (43.2 x 38.1 x 33 cm)Weight: 65 lb (29.5 kg)Electrical Requirements: 110-230 VAC/50-60 HzCompliance: CE compliant

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

The MPS R device comprises electromagnetic MPS module and R touch panel featuring 5.7” display (more). It has been designed to be integrated into weighing systems already owned by the customer. Compact design plus integrated electronics make MAS module easy to be adapted into technological lines and built inside customer-owned devices. It is possible to perform the measurements using the under-pan weighing method wherein the load is suspended beneath the module or a regular weighing pan. Due to high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware software, R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC. R Panel functionality has been implemented in RLab program as one of its numerous functions. MPS.R can also be integrated with E2R Weighing Records and E2R PGC.

Precision of WLC balances Fast, accurate and repeatable weight determination. Energy-efficient elect (more)ronics and display, combined with an internal rechargeable battery, are the perfect duo to allow you to work without access to mains power. Precision not just in the name When we designed this balance, we took care of the smallest details – both those you can’t see, hidden in the solid housing, and those you can touch. This balance is the result of a combination of our experience and true precision. The power of steel The use of stainless steel for the pan guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Internal power The internal rechargeable battery combined with the energy-saving display and electronics allow many hours of operation without mains power. Time counts The balance is equipped with a real-time clock that provides accurate time measurement in a way that is independent of external power supply. There is potential Printer, computer, flash drive or additional display – you can easily connect them thanks to the fact that the balance is equipped with interface RS232. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Good ALIBI The ALIBI memory used in the terminal allows for safe storage of weighing records without the possibility of unauthorized interference. A single measurement remains in the ALIBI memory up to a preset limit number of days of storage, counting from the date it was taken. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2003 Tested at 37°C and -2°C