Synthetic Genomics BioXp 3200 DNA Printer System

Designed for medical applications, the UP-D897 is a light, compact monochrome digital graphic printe (more)r that succeeds the popular UP-D895. Proven Sony direct thermal printing technology can deliver crisp, high-quality A6-size prints in approximately two seconds. A jog dial and LCD display on the front panel allow quick, easy adjustment of printer settings. Simple digital connection is via Hi-Speed USB 2.0 interface. Printing Method: Direct thermal printing Resolution: 325 dpi Gradations: 8 bits (256 levels) processing Picture Elements: 4096 x 1280 dots Picture Area: 320 x 100 mm Paper Size: Paper width of 110 mm Printing Time High-speed mode: Approx. 2 seconds/ image (960 x 1,280 dots) Printing Time Normal speed: Approx. 3.3 seconds/ image (960 x 1,280 dots) Picture Memory: 4096 x 1280 x 8 (bit) Interface: Hi-Speed USB (USB 2.0) (x1) Dimensions (WxHxD): 1154 x 88 x 240 mm Weight: 2.6 kg

Compatible with J series balances

This Parr Isoperibol Calorimeter 240 was removed from a university lab where it was surplus to requi (more)rements. The item is in reasonable cosmetic condition but has plenty of marks from use and age. The item powered on fine and we could interact with the control panel without issue. We attempted to run a test print and were met with Error 3800. We are told this is due to the O2 requirement and is not a fault with the system. The system was serviced in 2020 not long before it came to us. We were unable to test it further. Also included are the following:1x Parr 1755 Printer1x Parr/Star Power SupplyModel: AD8340

Zcorporation Spectrum Z510 3D Printer This was removed from a university lab where it was surplus to (more) requirements. The unit powers up but has not been tested further. Includes: -8 x Elga Veolia LC117 Purification Packs (expired 2019)-12 x Elga Veolia LC101 Pretreatment Packs (expired 2019)-2 x Elga Veolia LC117 Cartridge Packs (expired 2016 + 2010)

Universal USB A-B cable. Standard cable length: 1,8 m.

This is the first receipt printer of RADWAG production. We offer two models which differ in terms of (more) communication interfaces: RTP-RU80 – RS 232* and USB, RTP-UEW80 – USB, Ethernet and Wi-Fi. The printers communicate with all RADWAG laboratory balances and industry scales. Their connection and configuration is intuitively easy and takes barely few moments (Plug and Play). Communication via Wi-Fi enables remote printing. The printers are equipped with a paper cutter ensuring operation ergonomics. The set includes: RTP-RU80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; RS232 cable, female/ male; 80 mm thermal paper, 1 roll; RTP-UEW80: printer; power supply; cable with a plug of European standard, type C or E/F; USB cable; 80 mm thermal paper, 1 roll. *RS 232 port comes in a female version

Powerful stirring for your lab reactions AREC features state-of-the-art heating plate technology, de (more)signed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC to the Cloud Ermes system.

Factory settings: 2 – 3°C Suitable for: 2x 10L box or 2x 18L bag Dimensions (HxWxD): 800 x 635 x 435 (more) mm

ITEM-35538

Miele Professional Dishwasher  GG05 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested.  The inlet pressure is sufficient, the filter has been checked, cleaned and the propeller adjusted but shows an error  404 message which indicates there is an inlet issue. It is sold for spares/repairs as it needs a new inlet.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.