Radwag TMX19R.15.H2.K Multifunctional Scale

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Accuris PR1100-100 One-Step RT-PCR kit, 100 Reactions The Accuris One-Step RT-PCR Kit has been formu (more)lated for cDNA synthesis and subsequent PCR in a single tube for end-point analysis. This latest generation RT-PCR Kit consists of an MMLV-derived, thermostable Reverse Transcriptase (45°C to 55°C), an advanced RNase Inhibitor and Accuris Hot Start Taq for ultra-sensitive one-step RT-PCR from as little as 1pg total RNA starting material. The optimized buffer chemistry allows for efficient reverse transcription and PCR of problematic sequences with significant secondary structure (such as GC-rich targets). The Accuris One-Step RT-PCR Kit is ideal for determining the presence or absence of RNA templates and quantifying expression through qualitative analysis of RNA transcription levels. The kit also efficiently synthesizes double-stranded cDNA for subsequent gene expression analysis. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris One-Step RT-PCR kit, 100 reactions - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA T10 Basic ULTRA-TURRAX Disperser Speed Range 8,000 to 30,000 RPM Viscosity Max. 5,000 mPas Stirr (more)ing Quantity Max. 0.1 l Features - Quick-connect coupling for changing dispersing elements easily - Ideal for manual operation due to its light weight and ergonomic design - Extremely mobile due to direct line power (no transformer required) - Stainless steel dispersing elements can be cleaned quickly and easily as they can be dismounted without tools - Plastic disposable dispersing elements are available in two sizes, particularly suitable for PCR analysis - High performance drive ensures immense speed stability - Quiet operation The IKA T 10 Basic is a small dispersing instrument designed for volumes from 0.5 - 100 ml (H2O). It offers a wide speed range from 8000 – 30,000 rpm, allowing users to work at high circumferential speeds even with small rotor diameters. The quick-connect coupling enables easy changing of dispersing elements, making it ideal for a broad range of applications. Its light weight and ergonomic design make it perfect for manual operation. The instrument is extremely mobile due to direct line power and does not require a transformer. Stainless steel dispersing elements can be quickly cleaned as they can be dismounted without tools, and plastic disposable elements are available for PCR analysis. The high-performance drive ensures immense speed stability and quiet operation. With a motor rating input of 125 W and output of 75 W, the IKA T 10 Basic operates with a noise level of 65 dB(A) and features stepless speed adjustment displayed on a scale. Its compact dimensions are 56 x 178 x 66 mm, and it weighs only 0.61 kg.

Ohaus EX423N Explorer Precision Balance Introducing the OHAUS EX423N Explorer Precision Balance - a  (more)product of ingenuity that delivers top-notch performance. This model is unique in the market, ingeniously combining modern features and design elements to offer unmatched functionality in high-performance balances.The EX423N Explorer Balance is legal for trade and features a 420g capacity. It offers a default readability of 1mg and a certified readability of 0.01g, enabling highly precise measurements. The ample 5.1-inch pan size accommodates a variety of sample types, making it a versatile tool in any laboratory setup.The OHAUS Explorer Series is designed with smart and intuitive features that simplify even the most complex laboratory measurements. The EX423N model features a large color touchscreen that provides easy access to advanced application modes and icon-driven software. This includes a user manager, library, and minimum weight indication, making your laboratory tasks easier and more efficient.The EX423N Explorer Balance boasts fast stabilization times, optimized linearity, and repeatability specifications. It features enhanced vibration filtering, ensuring stability and accuracy in all readings. This model also offers you the flexibility of choosing between traditional calibration or the AutoCal™ models. The AutoCal™ feature automates routine maintenance and ensures your balance is consistently delivering accurate measurements.The Explorer's modular design is another hallmark of its ingenious architecture. It features a sturdy metal housing and a display that can be separated from the weighing base. This gives you the freedom to mount the display on the tower or wall for easy viewing, ensuring adaptability to any workspace configuration.The OHAUS EX423N Explorer Precision Balance is more than just a balance; it's a solution designed to enhance your laboratory's accuracy, efficiency, and throughput. Trust the Explorer Series to deliver the precise results you require.INCLUDED: The Ohaus EX423N Explorer Precision Balance includes: - Power Cord - One Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW