Radwag HX7.4.600.H10 Multifunctional Stainless Steel Platform Scale, pit version

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device's high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal's system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Orbit Marine AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it was  (more)surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg Capacity 220 g Readability 0.000 (more)1 g Repeatability 0.0001 g Features - Increased productivity via faster stabilization times including 1 second fast mode with Smart SHS - Easily determine the minimum sample size to reduce waste and increase savings, plus alert users to ensure USP41 compliance - Simplify your daily precision check and SOPs with the standard deviation function - Set up repeatability testing and run automatic precision checks without external weights using Electronically Controlled Load (ECL) management - Reduce errors and damage with impact shock detection and overload protection - Eliminate static disturbance of samples with available fanless / touchless ionizer - The GX-AE series includes a touchless IR switch that activates the ionizer for a specified duration - Six simple and straightforward keys - A quick toggle to change between USB and RS-232C communication - Easily level the balance (even with gloves on!) the illuminated, front mounted level - Features a connector for integrating an external infrared sensor, facilitating touch-free operations and improving lab safety - Automatic self-calibration and one-touch internal/external calibration ensure valid results - FR-Cal – calculates, displays/outputs the mass or volume flow rate by entering density - FR-Compare – comparator that provides feedback if the flow rate is within limits The A&D Weighing Apollo GX-224AE Analytical Balance ensures high-precision measurements with a capacity of 220 g and a readability of 0.0001 g. This balance features a fanless ionizer, standard in AE models, which effectively neutralizes static charges without physical contact, ensuring disturbance-free weighing. Additionally, it comes with an external IR sensor that facilitates precise and convenient measurements by enabling users to interact with the balance without direct contact, thus maintaining cleanliness and accuracy. Its Electronically Controlled Load (ECL) management allows for repeatability testing and automatic precision checks without the need for external weights, further enhancing the reliability of measurements. The balance is designed with a fast stabilization time of approximately 2.0 seconds, making it ideal for high-throughput environments where time and accuracy are paramount. This advanced analytical tool simplifies daily operations and compliance with USP41 standards by alerting users when sample sizes are below minimum weight, which minimizes waste and maximizes efficiency. The balance's impact shock detection and overload protection systems safeguard the unit from accidental damage, ensuring long-term reliability and consistent performance. Additionally, operational simplicity is achieved through six straightforward keys and a quick toggle function that allows seamless switching between USB and RS-232C communications, catering to various laboratory data management systems. Further enhancing its usability, the GX-224AE is equipped with an illuminated, front-mounted level for easy leveling even when wearing gloves, and it offers both automatic self-calibration and one-touch internal/external calibration to guarantee valid results. The balance's extensive range of measurement units and its ability to perform percent calculations and piece counting adds to its versatility, making it suitable for a wide range of scientific applications. With its robust design and advanced features, including the supplemental IR sensor, the A&D Weighing Apollo GX-224AE Analytical Balance is a superior choice for professionals seeking precise analytical capabilities. Backed by a five-year warranty, it delivers both quality and peace of mind for long-term use. INCLUDED: The A&D Weighing Apollo GX-224AE Analytical Balance, 220 g, 0.1 mg includes: - Touchless IR Switch - External Key Jack - Large Glass Breeze Break with Built-in Fanless Ionizer - Breeze Break Ring - Weighing Pan - Bubble Spirit Level - USB Cable - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Four sensors platform scale No matter where you place the load on the platform, the result will alwa (more)ys be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. Conveniently, without ramps You can use the scale as a pit – this allows the load to pass freely through the platform without application of ramps. If you need a dual-range scale, we can make one for you at an extra cost.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).