Radwag HX7.4.150.H7 Multifunctional Stainless Steel Platform Scale, pit version

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

HX7 H scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68 (more)) mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of a stainless steel. This guarantees you work for many years. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Constant 20 rpm pump drive unit.

Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet This was removed f (more)rom a university lab where it was surplus to requirements. The PC with the system cannot run the software. The software is included but will require a Beckman OEM PC system to run. The unit has the following lasers installed: 1 X 640NM - 106MW.1 x 592NM - 200MW.1 X 561NM - 202MW.1 x 532NM - 150MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 04/13/2015.The unit has been powered up. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use. It powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system power up fine.

This Pall GeneDisc Cycler Real-Time PCR Platform for Pa was removed from a university lab where it w (more)as surplus to requirements. The system powers on and is in a reasonably good cosmetic condition, we're unable to test it further at our facility. The item carried out self-checks on start-up. Included with the item: Delta Electronics 12-volt Screen Power Supply

Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes The Ohaus 30400170 Modular Heat Block, 64 x (more) 0.2 mL PCR Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400170 Modular Heat Block, 64 x 0.2 mL PCR Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus EX6202N Explorer Precision Balance Introducing the OHAUS EX6202N Explorer Balance, a high-perf (more)ormance balance that offers a blend of intelligence, intuitiveness, and ingenious practicality. Part of the renowned OHAUS Explorer® Series, the EX6202N expands on its modern features and design, providing unmatched functionality in your laboratory.Intelligent Performance: The EX6202N exhibits optimized linearity and repeatability specifications and enhanced vibration filtering for ultimate balance stability. With a 3x3 filtering setup, this balance ensures fast and stable weighing results. Additionally, select models offer OHAUS' automatic internal calibration system, performing daily routine maintenance. The Explorer EX6202N also provides traditional external calibration, offering a comprehensive balance solution to improve accuracy, efficiency, and throughput.Intuitive Operation: Equipped with a large color touchscreen display and an icon-driven application software featuring 14 unique application modes, the EX6202N provides ease of use unmatched in its class. The 3-level adjustable angle display further simplifies your weighing operations.Ingenious Design: The separate base and display allow maximum flexibility in any work area. Draftshield models isolate the weighing chamber to enhance stability and speed results, offering maximum accessibility through top-mounted side doors or a versatile top door that flips or slides open. Optional automated side doors facilitate hands-free entry.Practical Features: Up to four user-programmable touchless sensors in the EX6202N minimize cross-contamination and wear and tear from repeated touching. Furthermore, the balance meets or exceeds Class I or II accuracy requirements in accordance with NIST Handbook 44 and Canada's Weights and Measures Regulations.Superior shock protection, fast stabilization times, and 2-D Protection against shock, spill, and splash disruptions (high-capacity models only) contribute to fast, accurate, and reliable results.Intelligent Calibration: With AutoCal, the EX6202N ensures performance and assists with routine maintenance by automatically calibrating the balance daily. The balance self-calibrates when it senses a temperature change sufficient enough to affect weighing accuracy, or every 3-11 hours, depending on user configuration.Ingenious Modular Design: The balance's modular design features a color touch display that can be separated from the weighing base, offering various display features and robust base features for an optimized workspace.Explorer Application Software: Simplify even the most complex laboratory measurements with the advanced applications of the OHAUS Explorer EX6202N. Whether determining the difference between initial and residual weights or calculating the density of solids and liquids, Explorer eliminates the need for time-consuming manual calculations and data logging. The high-resolution display and innovative user interface make balance setup and application use effortless. Step into the future of precision weighing with the OHAUS EX6202N Explorer Balance.INCLUDED: The Ohaus EX6202N Explorer Precision Balance includes: - Power Cord - One Year Manufacturer's Warranty