Radwag HX5.EX-1.6.F1 One Load Cell Platform Scale

The RV 10 digital represents the continual enhancement of the IKA RV 10 rotary evaporator line. The  (more)unit comes with an universal heating bath, vertical glassware, state-of-the-art safety features and digital connectivity. The RV 10 digital is a robust and reliable lab companion. Its optimized bath volume allows for fast heat-up times. The condenser unit has special designed glass tubes that utilize the 1600 cm² surface extremely efficient. That’s why the RV 10 digital delivers reliable and reproducible process results that are usually reserved for more costly systems. Additional features such as smooth start, left-right interval or timer function capability support the user in their daily lab work. Another important aspect of the RV 10 digital are the sophisticated safety features. The motorized lift has an automated lift-out function in case of power outage to prevent superheating of the solvent. Safety temperature circuits can be set individually. Dry-run protection, adjustable lower end stop and lock function of bath setting complete the line of safety features. Type of cooling: vertical Cooling surface: 1600 cm² Speed range: 5 – 280 rpm Reversible direction of rotation: yes Lift: Motor Stroke: 140 mm Heating temperature range: room temp – 180°C Set temperature resolution: ±1 K Filling volume max: 4 l Timer: yes Dimensions (WxHxD): 500 x 430 x 440 mm Weight: 32.36 kg

Miele Professional Dishwasher  GG05 This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and has been tested.  The inlet pressure is sufficient, the filter has been checked, cleaned and the propeller adjusted but shows an error  404 message which indicates there is an inlet issue. It is sold for spares/repairs as it needs a new inlet.

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator Thi (more)s system was removed from a university lab where it was surplus to requirements. The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out. The previous client stated that this system was in full working order prior to removal. The system comprises: - Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS - Assembly No.: 1007440 - Serial No.: AF012360607 - Peak Scientific Instruments Nitrogen Generator - Model No.: NM20ZA - Serial No.: J06-06-06 - Running hours: 13,096 - Varian DS602 Vacuum Pump - Model: 949-9335S001 - Serial No.: 238954 - Fitted with oil mist filter EMF20 Code A46229000 - 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175) - 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065) - Lenovo MS PRO PC - Type 2561 - Serial No.: ES10392192 - Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software - Dell Monitor - Serial No.: CN-OUW191-71618-812-ALAB - Lenovo wireless keyboard and mouse - Serial No.: 201209008012 Included Manuals: - 3200 QTRAP Tuning, Calibrating, and Optimising Guide - Analyst Software Tutorial - API Safety Practice Manual Additional accessories: - 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606) - 4 x brackets (Part No. 016159A) - 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271) - 60 x swabs (approx) - 8 x mixed packets of small O-rings and micro bore tube end connectors - 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S) - 1 x SGE Analytical 500nl syringe - 1 x Pressure Sensor MPL-503 - 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4]) - 3 x plastic hose coils for nitrogen - 1 x 10-litre Nalgene bottle with 3-port top - 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Are you overwhelmed by the number of production processes? What about having them all under control? (more) To be able to analyse and correct them in real time? After all, it is the key to increasing the efficiency of the production line! Our clients, the factory owners, were the ones who told us about their problems and needs. Our answer is simple: the E2R System. This software is designed to make your work easier. The E2R System consists of six independent modules: 1. E2R Weighing, 2. E2R Weighing Records, 3. E2R Formulations, 4. E2R PGC, 5. E2R Checkweigher, 6. E2R Moisture Analyzer. Choose the best module for your company. Need more information? The E2R Synchronizer application allows for the collection of weighing records from all scales connected to the E2R System. Another application, E2R Manager, provides you with real-time data on the following issues: whether the scale is connected or not; which operator is logged in; what product is being weighed; for which customer is the production being carried out; which order is in progress.